Used Nucleus Eco Fr366104 for sale (5,639)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1327507695580, power: 575 kW (781.78 HP), total width: 750 mm, total length: 2,200 mm, total height: 750 mm, nominal heat output: 530 kW (720.60 HP), heating capacity: 574 kW (780.42 HP), fuel: domestic gas H, input frequency: 50 Hz, operating pressure: 7 bar, Equipment: type plate available, Remeha boiler installation, Freestanding, high-efficiency gas boiler. Very tidy machine, Currently still available for on-site inspection. Lsdpfx Akjyzq Dco Doaa Will be dismantled and prepared for transport by the seller. Collection by appointment. A total of 2 units available, price listed is per boiler.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, input current: 21 A, type of input current: DC, volume flow: 6,045 m³/h, overall weight: 1,100 kg, ALKO ECO JET 60/5 HD EXTRACTION UNIT Sawdust extraction, dust extraction, self-cleaning negative pressure filter, ALKO ECO JET Lajdeyrqnzopfx Ak Dea The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Ideally suited for all types of dry dust in various technological processes. The filter bags can be exchanged according to requirements and intended use.

Condition: used, Year of construction: 2021, 6000 W at 20°C water and 32°C ambient temperature. Dimensions (L/W/H): 55 x 55 x 140 cm Laodpfx Akovvi E As Dea Storage location: Supplier

Condition: used, Year of construction: 2017, input voltage: 400 V, compressed air connection: 7 bar, type of input current: three-phase, power: 94 kW (127.80 HP), We are offering this used ROQ ROQPRINT ECO P14 XL screen printing machine, year of manufacture 2017. Includes a ROQ screen printing dryer from 2014. Both units are in good working condition with no known issues. The package includes numerous accessories such as various pallets, screen printing frames specifically designed for the Roq click system, squeegees, and extra squeegee rubbers. Ledjyzr Suopfx Ak Doaa Optionally available: a table for fitting the click system onto the frames, a film printer, and a machine for sharpening squeegees. In short, everything you need to start immediately or take a significant step towards more professional production. Model: ROQPRINT ECO P14 XL Serial number: RPE-1601 Year: 2017 Active power: 94 kW Voltage: 3×400 VAC Power: 94 kW Air pressure: 0.7 MPa (100 Psi) You are always welcome to visit and inspect the equipment. Some accessories are also sold separately. If you have any questions or need more information, please feel free to send us a message or give us a call.

Year of construction: 2024, condition: used, Manufacture : Volkmann Lajdoyvk Taspfx Ak Dja Model : VS250 Eco Year : 2024 Condition: new, never used Classification: ATEX Ex (see photo) Type: MULTIJECTOR® Vacuum Transfer System / conveyor VS250 G900 Pump and Cover Assembly Maximum air intake flow rate: 4,063 NI/min Electrotimer ET4S (Electropneumatic control unit) Cleaning filters with compressed air Materials: stainless steel

Condition: used, Year of construction: 2021, Probst Verlegemaschine HVZ ECO — Year of manufacture 2021 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational Lodpfx Asyz Up Aok Dsaa - The product image shows a comparable unit in new condition — the actual condition varies depending on duration of use - On-site inspection in 37574 Einbeck available by appointment Price EUR 6.800 plus VAT | EXW Einbeck | Delivery on request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, Equipment: documentation/manual, Ercolina ECO 50 V1T is a professional and reliable pipe and profile bending machine. Compact, durable, and easy to operate, it is designed for precise bending of steel, stainless steel, aluminum tubes, as well as square and rectangular profiles. This unit is used but in good working condition, fully tested and ready for operation. ⚙️ Technical Specifications* Model: Ercolina ECO 50 V1T Max. pipe diameter (steel): up to Ø 50 mm Max. square profile: up to 40 × 40 × 3 mm Max. round hollow profile: up to Ø 48 × 3 mm Minimum bending radius: from ~80 mm (depending on tooling) Bending angle: up to 190° (programmable) Control: electronic (V1T version – with digital angle setting and memory) Motor power: approx. 1.5 – 2.2 kW Power supply: 400 V, 3-phase Dimensions: ~1100 × 600 × 1200 mm Weight: approx. 250 – 300 kg ✅ Key Features High-quality Italian brand ERCOLINA. Bending up to 190° with programmable radius. Compact and robust construction. Electronic angle setting with memory for fast and accurate production. Suitable for both one-off jobs and serial production. Used but tested and in good working condition. 🎯 Applications Pipe and profile production Railings, furniture, and metal structures Metalworking workshops Small and medium industrial companies Lodpfx Ajxdnx Hok Dsaa

Condition: new, Year of construction: 2023, SPECIAL PRICE - ONLY FOR A SHORT TIME!!! This machine works with a unique double-cylinder system in this class, which guarantees an enormous strength of the saw arm. In addition, it has an extremely solid design and therefore meets the highest demands in steel construction. The design means that steel beams up to the maximum capacity (610 x 360 mm) can be sawn on both sides. The mitre adjustment is done effortlessly with one hand, the clamping is hydraulic. The saw blade speed is infinitely variable from 15 - 120 meters / minute. This makes the saw suitable for cutting both aluminum and tool steel. The working height is 860 mm. Technical data: Cutting ranges: 90° Round: 360 mm Square: 360 mm Rectangle: 510x360 mm + 45° Round: 360 mm Square: 360 mm Rectangle: 440x360 mm + 30° Round: 330 mm Square: 300 mm Rectangle: 300x360 mm - 45° Round: 360 mm Square: 360 mm Rectangle: 440 x 360 mm - 30° Round: 300 mm Square: 300 mm Rectangle: 300 x 300 mm Motor effective power: 3.0 kW Hydraulic motor: 0.55 kW Coolant pump motor: 0.12 kW Saw blade dimensions: 4800 x 34.0 x 1.1 mm Belt speed: 15 to 120 m / min infinitely variable Standard accessories: - miter adjustment on both sides up to 30° each Ljdpfjh A H E Nex Ak Dsaa - Hydraulic clamping of the miter adjustment - Mitre angle digitally readable on mobile control panel - Coolant system with coolant flushing of the saw blade in front of the blade guides - Infinitely variable adjustment of the band speed - Saw blade tension monitoring - User-friendly control panel - Hydraulic clamping vice - hydraulic unit - Rotating chip brush - manual, hydro-mechanical saw blade tensioning - German operating instructions, spare parts list, electrical diagram, hydraulic diagram - Two-tone paint finish: dark gray RAL 7021, yellow RAL 1003 - CE conformity - Micro-Cool cooling spray device complete with universal spray head

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Lajdjyzy S Aspfx Ak Dea Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: used, Year of construction: 2010, operating hours: 29,870 h, functionality: fully functional, machine/vehicle number: 8045000191A, DMG CTX 510 eco – CNC Universal Slant-Bed Lathe Manufacturer: DMG (Gildemeister / DMG MORI Group) Model: CTX 510 eco (Ecoline Series) Year of Manufacture: 2010 Control Unit: Siemens Overview The DMG CTX 510 eco is a robust and powerful universal CNC lathe designed for heavy-duty turning and precision machining. Featuring a high-torque spindle and a 45° slant-bed design for excellent chip flow and thermal stability, this machine is ideal for both small batches and production runs. Key Technical Specifications Max. Swing Diameter: 680 mm Max. Turning Diameter: 465 mm Ljdpey D Il Asfx Ak Doaa Max. Turning Length (Z-axis): 1,050 mm Spindle Speed: 3,250 RPM Main Spindle Power: 33 kW (40% DC) / 22 kW (100% DC) Spindle Torque: 630 Nm (High torque for heavy cutting) Bar Capacity: 76 mm Rapid Traverse (X/Z): 30 m/min Turret & Tooling Number of Tool Stations: 12-position turret Tool Holder Type: VDI 40 Driven Tools (C-Axis): Equipped with C-Axis and milling capability for 3-axis machining. Included Equipment & Features Steady Rest ,Tailstock,Chip Conveyor Coolant System: High-pressure pump and tank. Physical Dimensions Weight: Approx. 7,800 kg Footprint: Approx. 4.5m x 2.4m x 2.0m Condition Well-maintained machine from a professional environment. Original DMG signature build from the FAMOT factory. Available for inspection

Condition: used, Year of construction: 1999, dimensions of saw-band 4200 x 34 x 1,1 mm saw band length 4200 mm cutting speed 15 - 150 m/min capacity 90 degrees: round 325 mm capacity 45 degrees: round 300 mm capacity 90 degrees: flat 500 x 300 mm capacity 45 degrees: flat 300 x 300 mm Laodpfxeyv Nk Dj Ak Dja cutting speed 15 - 150 m/min Working height 750 mm dimensions 1300 x 2050 x 1400 mm

Condition: used, axle configuration: > 3 axles, first registration: 01/2016, loading space length: 9,200 mm, loading space width: 2,550 mm, loading space height: 900 mm, total length: 13,570 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 245/70R17.5, wheelbase: 7,370 mm, color: yellow, Year of construction: 2016, Equipment: ABS, = Additional Options and Accessories = - Lift axle - Toolbox = Notes = Broshuis 4ASD-18-40/1 2 x self-tracking axles. 2 x lift axles. Lajdpeyy H Stjfx Ak Dsa Eco ramp operates on 24V. Loading bed: 920 + 317 cm extendable. Loading height: 90 cm (87 cm when loaded) Total length: 1350 cm. = Further Information = Axle configuration Tyre size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tyres; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Rear axle 2: Twin tyres; Tyre tread left inside: 30%; Tyre tread left outside: 50%; Tyre tread right inside: 30%; Tyre tread right outside: 50% Rear axle 3: Twin tyres; Steered; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Rear axle 4: Twin tyres; Steered; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40% Weights Unladen weight: 11,600 kg Payload: 54,400 kg Gross vehicle weight (GVW): 66,000 kg Identification Type number: 4AOU-16-40 / 4 AXLE / ECO RAMP / = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We make every effort to provide correct information, but no rights can be derived from the published texts.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 17060002, functionality: fully functional, operating hours: 32 h, power: 1.1 kW (1.50 HP), input voltage: 380 V, input current: 3 A, input frequency: 50 Hz, type of input current: three-phase, height adjustment type: mechanical, actuation type: pneumatic, total width: 600 mm, total length: 700 mm, total height: 1,450 mm, table width: 300 mm, table length: 600 mm, overall weight: 75 kg, operating pressure: 3 bar, Equipment: CE marking, documentation/manual, Eco-Press Vario Hinge Boring Machine – as new! Manufacturer: Verarbeitungstechnik Karl Heinz Model: Eco-Press Vario (Successor model to Grass) Year of manufacture: 2017 – Very few operating hours! The machine comes from a one-man operation, is very well maintained, and shows virtually no signs of wear! Incl. drilling head for hinges – drilling pattern Blum Incl. drilling head for 32mm system holes – 10-spindle, swivels 90° Therefore also suitable for drawer drilling Incl. drill bits for 32mm system hole head, 5mm Leitz Premium! Incl. drill bits for hinge boring head Total value of drill bits approx. €600! Incl. 2 extension measuring rails on each side Incl. pneumatic hold-down clamps Incl. centering aid with laser Incl. mobile base frame – working height 900mm Incl. all operating tools, manual, etc. Ljdpfxoyl Ikts Ak Deaa Ready for immediate use and available now! For further information, please send an inquiry! The machine is mobile and can be demonstrated at any time. Collection by purchaser! Only being sold due to upgrading to a CNC machine.

Condition: excellent (used), Year of construction: 2016, operating hours: 45,000 h, functionality: fully functional, clamping force: 600 kN, clearance between the columns: 310 mm, ejector stroke: 110 mm, opening stroke: 270 mm, total length: 3,980 mm, total width: 1,170 mm, total height: 1,870 mm, heating capacity: 6.25 kW (8.50 HP), Haitian MA600 II/130 eco Year of manufacture: 2016 Lajdeyyd Sdopfx Ak Dsa Clamping force: 60 t Immediately ready for operation. Machines are available! Subject to changes, prior sale, and errors!

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Lodpfx Akjyx Hpio Deaa Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3300x2100x2100 mm Lasdpfx Aev A Hadsk Dsa Weight 1500 kg Total power requirement 14 kw

Condition: used, maximum load weight: 32,320 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2019, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2019, Equipment: ABS, Vehicle Description: Kögel S24-1 Cargo, Lifting Axle, BPW ECO Axles Air Compact, Edscha sliding roof, side curtains, mounted on both sides: Steel pallet stop strips with VarioFix hole pattern (bolted), VarioFix slotted frame, on both left and right sides in the direction of travel, for internal width 2,468 mm (loading height under outer rail is reduced by approx. 20 mm). Axle lift mechanism on axle 1, fully automatic, load-dependent axle lift control. Start assist: activation by pressing the brakes three times, 30% overload allowed up to a speed of 25 km/h. Plastic toolboxes EBS system 2S/2M with stability control program (includes ABS/ALB function). IDEM Telematics System BasicTrailer incl. GPS location monitoring, coupling status, EBS data. Lajdpfx Aksyyc Spe Dea - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". Technical Data: Permissible total weight: approx. 39,000 kg Basic equipment unladen weight: approx. 5,920 kg Unladen weight of customized vehicle configuration: approx. 6,333 kg Bed length (internal): approx. 13,620 mm Bed width (internal): approx. 2,480 mm Rear through-loading width: approx. 2,480 mm Loading height unladen, level travel position: approx. 1,220 mm Loading height laden, level travel position: approx. 1,190 mm Vehicle height set at 290 mm Side through-loading height (internal): approx. 2,680 mm Height under roof (internal): approx. 2,760 mm Front overhang (ISO 1726): approx. 1,685 mm Front overhang radius (ISO 1726): approx. 2,040 mm Rear swing radius (contrary to ISO 1726): approx. 2,100 mm Fifth wheel coupling height: approx. 1,130–1,190 mm Chassis: Axle lift mechanism on axle 1, fully automatic and load-dependent. Start assist via triple brake actuation, 30% overload up to 25 km/h. BPW ECO Axles Air Compact assembly with disc brakes Ø 430 mm, ET 120. Air suspension with 180 mm lift. Tyres: 6 x 385/65 R 22.5 tyres, 160J (European brand of Kögel's choice). Steel rims 22.5 x 11.75, offset 120 mm (ET 120). Tarp: Tarp rope with two holders on the front wall Sliding tarp, quality approx. 900g/m², with over-center tensioning system, according to DAIMLER cargo securing standard (DL 9.5). Documents: - Load securing certificate according to EN 12642 XL (VDI 2700). - Beverage certificate according to VDI 2700 Sheet 12 - Certificate "Daimler Cargo Securing DL 9.5". TECHNICAL DETAILS Gross weight: 39,000 kg Unladen weight: 6,330 kg Max payload: 32,670 kg Axle configuration: 3 Wheelbase: 6,390 mm Loading length: 13,620 mm Loading width: 2,480 mm Loading height: 2,710 mm First registration: 03/2019 Suspension: Air Color: Silver Tire size: 385/65R22.5 Features: ABS, EBS, Telematics A complete equipment list is available on request. Despite utmost care, errors in this advert cannot be excluded. Subject to prior sale and errors. Please request more information.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Machine designation: Bandsaw Manufacturer: MEBA Model: 407A-OV Year of manufacture: 2005 Condition: very good (used) Functionality: fully functional Technical details Power: 5.5 kW (7.48 HP) Input voltage: 230 V Maximum cutting width: 407 mm Overall height: 2,000 mm Overall length: 1,400 mm Overall width: 2,500 mm Unladen weight: 3,500 kg Cutting range for round steel at 90°: 407 mm Cutting speed: 300 mm/min Saw band length: 5,120 mm Saw blade length: 5,120 mm Description MEBA 407A-OV CNC Horizontal Bandsaw Ljdpfoyxyv Aox Ak Dsaa Material feed conveyors Year of manufacture: 2005 Siemens control system Chip conveyor 5.5 kW 3.5 t L 1.4 x W 2.5 x H 2 m Saw band length: 5,120 mm Cutting speed: 15 - 150 m/min Clamping height: 10 - 407 mm Clamping width: 10 - 407 mm Cutting area: 407 x 407 mm Cutting range (round): 407 mm Infinitely adjustable lowering speed: 0 - 300 mm/min MEBA Maschinenbau GmbH Standard commission System designation: ECO 407A-OV Year of manufacture: 12/2005 Type: ECO 407A-OV MEBA Operating instructions MEBAMAT 407 A-OV Chapter 1 - Technical Data Machine type: MEBAMAT 407 AOV Machine number: 7099 Cutting range: 90° Round: 407 mm Flat: 407 x 407 mm Bundle clamping range: 10 - 407 mm Width: 10 - 407 mm Height: 0 - 600 mm Material feed: 0 - 9999 mm Single: Multiple: Remnant length: Manual: approx. 25 mm Automatic: approx. 70 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: stepless hydraulic Lowering speed: 0 to 300 mm/min - stepless Saw band dimensions: 5120 x 41 x 1.3 mm Operating instructions MEBAMAT 407 A-OV Saw band tension: hydraulic Approx. 3050 kg (net) Machine dimensions (L x W x H): Approx. 1500 x 2600 x 2100 mm Max. support weight: Material weight max. 600 kg/m Working height: 750 mm With installation elements approx. 800 mm (option)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. • Tool magazine: 20 positions • Table size: approx. 790 × 560 mm • Notes/condition: Screen may be defective • Error message during tool change (see images) & contours/drilling patterns can no longer be programmed Laodsx D D Htjpfx Ak Dsa Additional equipment • 3D probe • Chip conveyor & coolant & miscellaneous: No chip conveyor & no internal cooling, only normal external coolant supply Dimensions Machine Depth 2050 mm

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad Lodpeyttyvofx Ak Djaa MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: excellent (used), Year of construction: 2020, For sale is a used Drechselmeister Twister ECO woodturning lathe. The machine is in good condition and has been serviced and inspected by our qualified technicians (fully functional). Technical Data: - Center height: 200 mm - Turning diameter: 395 mm (increased with optional external turning attachment) - Distance between centers: 720 mm (extendable) - Spindle mount: M33 x 3.5 with ASR (Euro) safety groove - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60–1,350 and 180–3,750 rpm - Motor with forward and reverse operation Laodpjyucqtsfx Ak Doa - Tailstock quill travel: 100 mm - Motor: 2 HP (230 V connection) with frequency inverter - Weight (stand version including cast iron legs): 165 kg The machine is located in A-5431 Kuchl and can be inspected and collected during our business hours at any time. Subject to prior sale. Related search terms: woodturning lathe, lathe, turning machine, lathe machine Reference: B18OO 5056

Condition: new, Berg & Schmid Bandsaw Machine GBS 218 Eco AutoCut For mitre cuts to the left up to 60° Lodpfeyw Ta Ssx Ak Dsaa Clamping vise with quick-release mechanism Carbide saw band guides for highly precise cuts Integrated blade tension control, electric coolant system, machine base 3-stage AutoCut system with manual function, Motor: 400 V / 1.2 kW Weight approx. 240 kg, cutting speed 30 + 70 m/min Includes 1 special saw band 2455 x 27 x 0.90 mm Cutting capacities: 90° round / square / rectangular: 220 / 210 / 230 x 185 mm 45° left round / square / rectangular: 150 / 150 / 150 x 210 mm 60° left round / square / rectangular: 90 / 90 / 90 x 100 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, Trimming, gluing, end trimming, edge trimming, corner rounding, scraper-edge, and polishing. Our ECO F7 stands out from other compact edge banders because all the functional modules of the Eco F series are derived from, and suitably adapted from, industrial edge banders. While maintaining the same high precision and stability as industrial edge banders, the maximum durability and operational efficiency of the equipment are preserved. The Eco F series saves space and provides excellent edge banding results. It is ideal for small furniture factories, decoration workshops, and woodworking shops; it also serves as an excellent solution for small batch production in large-scale furniture manufacturing facilities. Most components are sourced from high-quality, well-known brands, such as: SIEMENS, AUTONICS, HONEYWELL, OMRON, and DELTA. Includes: – Infrared heating lamp – Glue scraper – Meter counter – Cleaning liquid – Release agent Lodpfx Akouzxk Aj Deaa MOTORIZED HEIGHT ADJUSTMENT Complies with the latest CE regulations.

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 150 mm/sec work speed 10.0 mm/sec return speed 140 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 110 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 15000 kg range L-W-H 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- Lodpfx Akoynnk Ee Deaa ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T- graphics/touchscreen * 2D graphic touchscreen programming operation * 3D display in simulation and production * 17" high-resolution color TFT screen * Bending sequence calculation * Product programming and display in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec work stroke 265 mm dayligth 480 mm table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 350 mm/s Laodpfx Akexaa Eqo Dsa * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 300 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FPSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity