Used Receding Head Press for sale (20,277)

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Bsdpsu Thhrefx Akxedb Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Bjdpex A U Ncefx Akxodb Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in good used condition. Technical features: - Bushing pressing including plastic deformation Bdjdpfx Akjy H Rahsxjb - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2023, condition: ready for operation (used), This Other FSW head was manufactured in 2023. Designed to integrate seamlessly with milling machines, it features friction welding technology. Ideal for enhancing your milling setup with advanced welding capabilities. Contact us for more information. • Item: FSW head (Friction Stir Welding head) Bdedpfey Iamysx Akxeb • Quantity: 1 • Description: Friction welding equipment to install directly in a milling machine

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 20 x 70 mm -Length: 3020 mm Bodpfxsd S D Dne Akxedb -Weight: 22 kg

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Weigher: Gentle and Precise Filling Technology Our linear weigher is the ideal solution for simple and accurate dosing and filling of products. It seamlessly combines precision with gentle handling. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods, even with sensitive items. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective operating principle: Products are conveyed via linear belts or vibratory feeders and precisely dosed into the weighing bins. Features: - Easy operation and cleaning - Convenient control via color touch screen - Memory for different weighing recipes Bjdpfxsyazyws Akxodb - Precise weighing results through three-stage weighing (coarse / medium / fine), each stage individually programmable - Tool-free format change - Intuitive design enables quick changeover and easy cleaning - Gentle handling: minimal drop height protects delicate and fragile products - Versatile: flexible use in both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made from 304 stainless steel, easy to clean - Compact design and durable construction save space and reduce maintenance effort With our linear weigher, you receive a reliable, precise, and hygienic solution that enhances the efficiency of your production processes. Technical data - Weighing range: 20g to 2,000g - Accuracy: up to 1g, depending on product - 4.5-liter weighing bin - Max. speed: 30 weighings/minute (double-head weigher) - Material: stainless steel 304 (V4A / 316 on request) - Connection: 220V / 50Hz / 6A

Condition: excellent (used), functionality: fully functional, For sale is a Keyence IV2-G500CA vision sensor, color version, from the high-performance IV2 series by Keyence. The device is in excellent optical and technical condition – tested, clean, and free of damage. The IV2-G500CA is a compact color vision sensor with integrated illumination, ideal for use in industrial image processing, quality control, and automation applications. Technical specifications: Model: IV2-G500CA Type: Color camera / vision sensor Manufacturer: Keyence Corporation (Japan) Bdjdpfex Hyt Rjx Akxob Series: IV2 Series Compact design with integrated lens and illumination CE and KC certified Connection via Keyence IV2 connection cable (not included) Scope of delivery: 1× Keyence IV2-G500CA sensor head (without controller, cable, or additional accessories) Note: A compatible IV2 controller (e.g., IV2-500C or IV2-500MA) and a connection cable are required for operation. The device offered here is the sensor head only, not a complete system.

Condition: used, Year of construction: 2009, Extraction diameter: 250 mm Rated volumetric flow: 3534 m³/h Filter area: 22.6 m² Motor: 5.5 kW Briquetting: throughput approx.: 30 kg/h Briquette diameter: 65 mm Motor: 3.0 kW Storage location: Nattheim Bdodpfx Ajyym A Sjkxob

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. Bdsdpfx Aexfl Axokxob The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Bodpfxsfrzlms Akxedb Nominal force: 120 kN Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Year of construction: 2023, condition: used, Used machine Bdsdeyf R Alepfx Akxsb Year of manufacture: 2023 Equipment and technical data: - Machine frame: robust, torsion-resistant steel construction - Membrane frame: opening/closing with gas pressure cylinders - Swivel castors: removable, 360° rotatable - Vacuum pressing pressure: 0.85 kg/cm² (8.5 t/m²) - Vacuum table: 3.68 m²; 31.28 t - Membrane: natural rubber 3100 x 1500 mm - Usable area: 2920 x 1320 mm - Material thickness: 2 mm - Colour: grey - Material hardness: 53 Shore A - Tear strength: 26 MPa - Elongation at break: 690% - Temperature resistance: up to +130°C - Pressing area: 2920 x 1320 mm - Power requirement: 1.25 kW Options: - Membrane quick-change system - 200 l tank with digital pressure control, operating modes: automatic and manual - Additional vacuum outlet for further applications: vacuum bag, vacuum clamps - Becker pump 40 m³/h Dimensions: 3200 x 1400 x 1000 mm Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2013, Vacuum Press, Vacuum Table, Joos Vacuum Table with Silicone Membrane Universally applicable press, veneer press for veneering, coating, form bonding, form veneering, edge gluing, etc. With this press, you can generally do without a hydraulic veneer press, though with some limitations. Bjdpsy Hl Hpsfx Akxjdb New heat-resistant silicone membrane, extremely elastic and easy to clean. Also suitable for the molding of preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410mm, usable surface approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h output, and two vacuum tanks of 200 liters each, allowing comfortable operation and rapid evacuation. Electronic vacuum pressure switch, so the pump switches off when the required vacuum is reached and does not run continuously Mobile on four swivel castors, lockable Frame can be easily folded up, secured with two catches Double frame for quick membrane changes Currently fitted with a new silicone membrane Rapid vacuum distribution thanks to grooved base plate CE mark Original paintwork, some areas retouched Both the silicone membrane and base plate have been renewed; the machine is ready for immediate operation. Dimensions approx. 3100 x 1550 x 1020mm (LxWxH). Weight approx. 550kg. The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “Further offers from this supplier.”

Condition: ready for operation (used), Centre height: 80 mm Spindle bore: 18 mm Spindle mount: MT 3 Swivel range: +110° / -20° Weight: 26 kg Bdedpfxsyv Dy Ts Akxjb

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Bsdpfx Aey Icn Tekxodb Drive motor 55 kw

Condition: good (used), functionality: fully functional, Press Brake Brand: AMADA Model: HFT 80/25 Capacity: 2500 x 80T 4 axes Distance between uprights: 1800 mm Dimensions: 3500 x 1500 x 2100 mm Weight: 6,500 kg Bedpfxewivdde Akxjdb Equipped with new and used tooling

Condition: reconditioned (used), functionality: fully functional, stroke length: 105 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table height: 970 mm, throat depth: 200 mm, total length: 1,420 mm, total width: 1,100 mm, total height: 1,800 mm, overall weight: 2,800 kg, working width: 60 mm, back gauge: 345 mm, control type: manual, actuation type: hydraulic, Press Brake Brand: PROMECAM Model: PPH25.12B Capacity: 1200 x 25T Distance between uprights: 1020 mm Bdsdpfxsxwukcs Akxsb Throat depth: 200 mm

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T Bdsdpfx Aowtmi Eekxjb With mobile blade rack

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Bodpjyapdqefx Akxodb Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: used, Press Brake Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Throat depth: 200 mm Stroke: 130 mm Bdjdpfx Akox Tqt Usxsb Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Bdodpfx Akjwu Adbexeb Specification: V: 3x380-400 Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: used, Used folding platen press Bdjdpoymr S Refx Akxeb

Condition: used, Manual spindle press - Maximum filling height: approx. 90 cm - Pressing area: 102 x 72 cm Bdodpfx Akjymr Tzsxjb

Condition: excellent (used), Year of construction: 1985, I sell hydraulic press MÜLLER HEP 10.20.35, year of production 1985. the press worked until the very end in bdb condition. Review of the press in 2023. Bdjdpfxsudph Ij Akxob

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Bdjdpfxjxzu Rqe Akxsb Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: excellent (used), I sell a Lukas baler in very good condition. Bodeum Htzepfx Akxsdb