Used Wmw Faceplate for sale (1,687)

Condition: used, Year of construction: 1964, Technical details: shaft diameter: max. 120 mm work piece - max.: 800 mm height of profile: Tiefe: max. 90 mm grinding spindle speed: nicht bekannt U/min Table dimensions: Ø 150 mm voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 0,675 t dimension machine xH: 0,75 x 0,70 x 2,0 m Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clamping head. -travel=vertical 950mm by handwheel and transversal 80mm by crank handle Laedpju Ngr Dsfx Ak Dsa -abrasive device with diamond, adjustment crosswise= 80mm. Table other specifications: -with fixed tip holder 60°. -speed 63 / 125 rpm. -adjustment vertical 600mm, in height 1.100mm, operation manual. centering block: -prismatic guide accessories: -fixed tip L=180mm -fixed tip L=300mm -div. shank grinder -div. clamping and auxiliary tools *

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm Ljdpfx Asu Nfvuok Dsaa mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Technical details: grinding length: 1000 mm grinding width: 315 mm workpiece height: 390 mm table speed: 2,5-25 m/min table surface area: 250 x 1000 mm Lodpfou Ngn Sjx Ak Deaa distance table - spindle center: 550 mm dimensions of grinding wheel: Ø max. 315 x 13-63 x Bohrung Ø 75 mm control voltage: 220 / 50Hz V/Hz total power requirement: 10,5 kW weight of the machine ca.: 5,0 t dimension machine xH: 3,35 x 1,5 x 2,10 m Die Maschine befindet sich derzeit in der technischen Abteilung. *

Condition: used, Technical details: Pressure: 2,3 t Lodpfx Aksu Nfwls Djaa stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg Lasdpfxow D Awmo Ak Dea dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1984, Technical details: Ledpfsu Ng Irjx Ak Doaa grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Technical details: width: 1270 mm depth: 1000 mm height: 1600 mm 2 pieces clamping angle available ( Priece per piece) T-slot according to DIN 650 a=35mm; b=60mm; c=27mm; h=65mm Ledpfx Aksu N Ea Hs Dsaa *

Condition: used, Year of construction: 1965, faceplate diameter 5300 mm swing diameter 6300 mm turning height 2800 mm slide adjustment 1700 mm table load 50 t turning speeds 0,3-14 U/min Feed 0,056-10 mm/U digital readout Sony Rest 2 total power requirement 120 kW weight of the machine ca. 187 t No:11670009-05rer Lajdjyqt R Aepfx Ak Doa The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1965, faceplate diameter 3500 mm swing diameter 4000 mm turning height 3150 mm slide adjustment 1700 mm table load 25 t digital readout Heidenhain Rest 2 total power requirement 90 kW weight of the machine ca. 95 t No. 6671024 The tech. Data are manufacturer or operator information and therefore non- Lsdeyqtbuspfx Ak Dsaa binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm Ljdsvbh N Rjpfx Ak Doaa range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Laedpfxsu Ng Nco Ak Dja Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Technical details: bore capacity in steel (diameter): 40 mm throat: 360 mm bore stroke: 280 mm spindle taper MT: MK 5 spindle speed:: 32 - 1400 U/min feed: 0,11-1,73 mm/U connected load: 6 kW Distance spindle/table max.: 750 mm table clamping surface:: 780+650 mm Laedpswid Uwefx Ak Doa drill table adjustment: verical 800 mm column diameter: Größe: 230 x 950 mm dimension machine xH: 1,1 x 0,8 x 2,8 m weight of the machine ca.: 1,5 kg for thread cutting clockwise and counter clockwise operation *

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW weight approx.: 1200 kg dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Ljdpju Nc Nlefx Ak Dsaa Machine vice included. *

Condition: used, Technical details: x-travel: 1000 mm y-travel: 350 mm z-travel: 400 mm distance between column - table edge: min.150 / max. 550 mm turning speed range: 28 - 1400 / 18 step U/min tool taper: SK40 Ljdpev Sz Diofx Ak Djaa spindle head swivable left - right: 90° und vor/zurück: 45° ° feed:: X/Y-Achse: 16 - 800 / 18 step mm/min Table dimensions: 1600 x 400 mm table surface area: 1400 x 330 mm total power requirement: 14,5 kW weight approx.: 4000 kg dimension machine xH: ca. 2,0 x 2,4 x 1,85 m

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Laodpfxevbhv Rs Ak Dsa Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: used, Technical details: number of spindles: 4 bore capacity in steel (diameter): 30 mm bore stroke: 200 mm drill spindle - Morse Taper: MK3 spindle throat: 350 mm spindle distance: Mittenstand: 490 mm headstock adjustment: 500 mm feed:: 0,07; 0,15; 0,25; 0,33 / 4step mm/U Lajdpfxsu Idt No Ak Dsa feed:: manuell und automatisch spindle speed:: 70 ... 1.600 / 8step U/min distance between table/spindle: max. 430 mm distance between table/spindle: min. 180 mm table surface area: 1820 x 400 mm table adjustment: 250mm mit Handkurbel mm total power requirement: 10,8 kW dimension machine xH: ca. 1,0 x 2,1 x 2,8 m All spindle heads with clockwise and counter-clockwise rotation Drill head 1 to 3 clockwise and counter-clockwise rotation without tapping function Drill head 4 with automatic thread-cutting function, rawhide chuck up to Ø 33mm All drill heads and the table are height-adjustable. Equipment: Coolant supply i.D. *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Laedpfxsu Ng Nps Ak Dea Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Technical details: number of spindles: 4 bore capacity in steel (diameter): 2-16 mm bore stroke: 140 mm drill spindle - Morse Taper: MK 3 spindle throat: 280 mm spindle distance: 455 mm headstock adjustment: 250 via Hand - Kurbel mm feed:: 0,08 - 0,12 - 0,20 - 0,31 / 4 steps mm/U feed:: automatic + manuell spindle speed:: 180 - 2000 / 8 steps U/min distance between table/spindle: min. 3x 140mm und 1x 260mm mm Laodpfx Aksu Idugs Dja distance between table/spindle: max. 3x 700mm und 1x 820mm mm table surface area: 1800 x 350 mm table adjustment: 300 via Hand mm total power requirement: 6,3 kW weight of the machine ca.: 2,4 t dimension machine xH: 2,1 x 0,9 x 2,2 m Application: Drilling, countersinking; reaming and thread cutting. Each drill spindle has its own drive motor Equipment: Foot pedal/operation Hand crank *

Condition: used, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 table surface area: 400x800 fest mm spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: Laodpfxeu Nc R Ns Ak Dsa - cooling system - control panel with jib arm Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors i.D. *

Condition: used, Technical details: cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle Ledsu Icqyjpfx Ak Djaa lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. *

Condition: used, Year of construction: 1987, Technical details: spindle diameter: 120 mm x-travel: 2750 mm y-travel: 1500 mm z-travel: 1250 mm B-axis (table): 360 W-axis (spindle longitudinal): 900 mm control for program: TNC 155 Bahnsteuerung / contouring control tool taper: SK50 table load: 6,3 t table-size: 1600 x 1400 mm table rotating: 360 ° range drill spindle revolution per minute: 3 - 1000 U/min total power requirement: 100 kW dimensions electric cabinet: L: 650 x B: 2800 x H: 2100 mm machine dimensions LxWxH: siehe Liste m weight of the machine ca.: ca. 15,0 t Contouring control Facing slide feed 210mm (U-axis) hydraulic unit Boom with control panel Measuring system Heidenhain Lasdpsu Idrfsfx Ak Dsa *

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm Lsdpeu Nc Hkefx Ak Doaa table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions *

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. Lodpfx Ajv A S Efsk Doaa 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW Lajdpfx Asu Nfuqsk Doa weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Technical details: turning diameter over bed: 350 mm turning diameter over support: 200 mm turning length: 560 mm centre height: 170 mm spindle bore: Ø 32 mm range of revolution per miute: 36...1.800 / 8 step U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m Lasdpfxovadd Ij Ak Doa -Working stroke longitudinal support=580mm; plan support=170mm; top support 130mm; -Workpiece support via 3-jaw chuck Niles Ø 160mm, speed 2,800 rpm. -Tool holder quick change steel holder Multifix. Equipment: Cooling water pump 4 pieces machine feet Copying device *