Used Cekamonsaws M for sale (69,550)

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Bdodpfofr T Eqsx Akxeb Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. Bjdpfx Asftb Ebekxsdb The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSE 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Bdedpefv Hiqefx Akxjb Fan is installed above the wall + Fan in the height Air capacity: 7,200 m³ / h Motor: 0.75 kW explosion-proof (ATEX) Exhaust air pipe: 500 Ø mm depth: 900 mm The pipeline should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Painting cube on rollers Ready to plug in 230 V Motor power: 1,1 kW volume flow: 2.500 m³/h Dimensions: 1200 x 1200 mm W X H Hose connection rear bottom side: 250 mm Bdjdpfxsfuhu Ae Akxeb Double filtration system paper filter and Paintstop filter mat Spray booth Paint mist Dry spray wall Spray wall Paint wall

Condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWc 20.20 Dry bulkhead Dimensions: 2000 x 2000 mm W X H + Fan in the height Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof Bdedpfsfn Ndcsx Akxeb exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. T.S.W.C. 30.20 Dry bulkhead Dimensions: 3000 x 2000 mm W X H + Fan in the height Air capacity: 10.800 m³ / h Motor: 2,20 kW ex-proof Exhaust air pipe: 500 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+180,- EUR net) Options/additional price for: Bjdpfx Akjfn Nddexodb Paintstop filter mat terminal strip: 180,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Bdjdpjvbdyfjfx Akxeb Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: good (used), Year of construction: 2016, functionality: fully functional, PASSPORT™ Automatic T-Shirt Unloader - automatic unloader for textiles Bdjdoqvmkdspfx Akxsb - fully working - not much use

Year of construction: 2019, condition: used, functionality: fully functional, For Sale: M&P Radish Top & Tail Machine – High-Efficiency Vegetable Processing Manufacturer: M&P Engineering Model: Radish Top and Tail Machine Condition: Excellent / Fully Operational Location: Fincham, Norfolk Availability: Immediate Description: Boost your vegetable processing efficiency with this M&P Radish Top and Tail Machine – a high-performance solution designed for the precise and rapid trimming of radishes. Built to the highest standards by M&P Engineering, this machine is ideal for commercial vegetable processors looking to streamline operations and maintain consistent product quality. Key Features: Accurate Top & Tail Cutting – Clean, consistent cuts reduce waste and improve product appearance. High Throughput Capacity – Designed for continuous operation and optimal productivity. Hygienic Stainless Steel Construction – Easy to clean and built for food-grade environments. Bsdpfx Akewtf Awoxjdb Adjustable Settings – Accommodates different radish sizes for maximum flexibility. Plug & Play Setup – Minimal installation time; ready for immediate use. Ideal for: Food processing plants, fresh produce packhouses, and ready-to-eat salad manufacturers.

Condition: new, Year of construction: 2025, Laser source: Raycus or Max: 4/6/8/12 kW Laser head: 3 D BOCI , Control system: FSCUT 5000 A Chuck: 20-450 mm Loading/unloading: 12000 mm X/Y axes Positioning accuracy: ±0.05/1000mm Repeat accuracy: ±0.03/1000mm Acceleration: 0.8g (m/s²) Rotation speed: 60 rpm Max. Positioning speed: 60 m/min Bjdji Apfzepfx Akxodb Max. Max. weight of a tube: 1500kg 1.Raycus 6000W laser source 2.BEVEL laser head 3.welded frame DPL 4.Schneider electrical components 5.helical rack KH 6.techmech reducer 7.Yaskawa servomotor 8.SHAC guides 9.integrated power control 10.FScut 5000 software 11.integrated electrical cabinet 12.HANLI water chiller 13.cantilever gantry axis-X FHBS 14.automatic waste collection 15.crawler-type automatic workpiece collection 16.automatic support system 17.loading frame 12000mm 18.unloading frame 12000mm

Condition: good (used), Heidelberg STA- M 30F Pharmacy Standing delivery Manufactured by Heidelberg, Germany. Can be connected to any Heidelberg, Herzog Heymann, MBO, Horizon, etc. folding machine. The device also works independently of the folding machine. Smooth adjustment of the delivery speed. Height adjustment. Packet counter with delivery shift. Bdedpfjw D E Nljx Akxsb

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc Bjdpfxexta U Ee Akxedb 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: like new (used), Year of construction: 1999, functionality: fully functional, operating hours: 24 h, total width: 1,000 mm, total height: 2,500 mm, overall weight: 1,200 kg, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion Bsdpfxjurb R Eo Akxsdb

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Bdedpfxevllxdo Akxeb Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg The radiator has been technically inspected, fully functional

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Bsdpjxa H Ewsfx Akxodb It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Bsdpfx Aswzmcbekxjdb Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PEF-2.5 PULVER EINBRENNOFEN ELEKTRISCH, temperature: 230 °C, heating capacity: 30 kW (40.79 HP), inner dimension length: 2,500 mm, inner dimension width: 1,505 mm, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ⭐ Powder furnace with electric heating - ✔️ Internal dimensions: 2500 mm L * 1505 mm W * 1800 mm H ✔️ Electric heating output: 30 kW/h ✔️ Fan: 3000 m3/h 80 mm SS ✔️ Circulation fan output: 1.5 kW/h ✔️ Total 35 kW/h +- 10% ✔️ Digital heat control, continuously adjustable temperature up to 220°C ✔️ Sandwich panels inside: 1.5 mm galvanized steel, outside: 1.5 mm powder-coated Steel ✔️ Adjustable curing temperature, curing time, and exhaust fan function Bedpfswfgbrsx Akxodb ✔️ An audible signal sounds at the end of the curing time ✔️ Insulated door with special locking systems (snap lock) ✔️ Insulation: 150 mm (150 mm rock wool) 🔥 PEF-2.5 Curing Oven: Your versatile industrial oven for drying and curing processes! 🔥 Whether powder coating, wet paint, plastic processing, or other thermal processes – the powder curing oven is your reliable solution for professional curing and drying processes up to 230°C! 🌡️ _____ 🚚 Maximum loading flexibility • Compatible with ceiling rail systems • Optionally with insert shelf system for small batches _____ ⚙️ Intelligent control – just the way you need it ✅ PID control (optional) for precise temperature control ✅ Touchscreen control panel & smartphone control 📱 (optional) ✅ Weekly & monthly reports at the touch of a button (optional) ✅ Timer function: freely programmable from 10 minutes to 24 hours ⏲️ ✅ Automatic shutdown after the end of the process _____ ♨️ Ramp heating mode (optional) Precisely control temperature progression and holding times, e.g. E.g.: • Reach target temperature within a defined time • Maintain desired time • Controlled cooling to target temperature • Automatic notifications of process events _____ 🛡️ Safety is our priority 🟢 Safety sensors to prevent overheating 🟢 Automatic shutdown in the event of a fault 🟢 Acoustic warning signals in the event of errors 🟢 Solvent and fume removal via automatic venting _____ ⚡ Customized energy and heating system 🔥 Also available with an extension up to 400°C for high-temperature processes (optional) _____ 🧠 No repeated settings necessary! The furnace saves your process parameters – batch by batch. This saves you time and avoids errors. _____ 📢 And best of all: If you have special requirements – we also build customized furnaces according to your specifications! Contact our team of experts for a personalized consultation! _____ ☀️ 2-YEAR WARRANTY ☀️ Request more information

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Bdjdpfx Ajxcal Ajkxob

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Bedexcalcspfx Akxjdb The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work, we have one more if you need 2 in your factory, price for two machine could be under negotiate. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Bdodpfsfn N U Hsx Akxob

Condition: used, Year of construction: 2006, Description Brand: H&M Type: HM-Z/4 F Year of manufacture: 2006 Feed length: 8500 mm Industrial PC. Saw blade diameter: 700 mm Angle adjustment: 0-180º Tilting angle: 0-45º Z-axis adjustment: 200 mm Bdjdpfxswzkyqs Akxjb Maximum cutting height: 250 mm Discharge system with pushers

Condition: new, input voltage: 400 V, - EXCELLENT QUALITY FROM EUROPEAN SOURCES - STAINLESS STEEL SPIRAL - STAINLESS STEEL TUB - WITH PROGRAMMABLE DIGITAL CONTROL FOR BOTH SPEEDS - ALSO WITH MANUAL BUTTON ON DISPLAY Bedpox At Htofx Akxedb - CAN ALSO ROTATE IN REVERSE DIRECTION - TUB CAN BE ROTATED SEPARATELY - AFFORDABLE PRICE FOR GREAT QUALITY

Condition: excellent (used), Year of construction: 2021, Year of construction: 2021/2022 Space requirement for entire system: 10x32 meters Total connected load: approx. 350 kW Peak value: approx. 120 kW Average value: approx. 90 kW Personnel requirement: min. 2 people Cutting capacity: maximum 80-100 fm/8h Round log diameter: min. 10cm max. 100cm Round log lengths: min. 100cm max. 600cm Edging system: 3-stack variable / 120mm cutting height Due to a restructuring of the company, a new, complete band sawmill is for sale as follows: - Round log feeder - Block puller - Balz debarking machine BG 90 6W-GR - Steep conveyor with feeder - Tension carriage ELCA Legno CRO 17 - Band saw ELCA Legno SNI 14 - Conveyor belt Bjdpfxjvw Ry Do Akxodb - Trimming machine Möhringer 323 001 12 - Stacking system M-TEC - Disposal line / chipping system ZENO ZTI 600/520/160

Condition: used, functionality: fully functional, M&J/Metso Shaft-B 10 knives. Bjdov A Eycspfx Akxedb used. incl Bearing 1 Arr.

Condition: excellent (used), functionality: fully functional, M&J 6000-12 Cutting Table Mint condition Counterknives fully rewelded and hardfaced Bdsdpfsw Ufhbox Akxeb Shafts with Bearing System 1 arrangement ✔️ Ready for immediate use Contact us for price and further details.