Used Ony Ftm-13 for sale (10,350)

Condition: good (used), Year of construction: 2007, sheet width 1350 mm Bwsdpjyuzcuofx Akxsl plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 35 Hub/min cutting angle 2.0 Grad table height 945 mm distance between columns 1361 mm Control CIDAN / SIEMENS engine output 5.5 kW weight of the machine ca. 1400 kg range L-W-H 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display * Target / actual value stop value input * stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF)

Year of construction: 2013, condition: excellent (used), Comes for sale: 1 piece used H crane traverse Bwsdpfx Asit T N Ajkxel Manufacturer: SMV Scheunemann type: 13-0163 SHTS60 BJ: 2013 Own weight: 4.105Kg Combined 60t and 28t load lifting points dimensions L x W x H: 5.900 x 2.700 x 1.200mm Can be inspected in our warehouse in 09599 Freiberg.

Year of construction: 1987, condition: used, 13-Stand Rebar / Bar Mill - 100.000 Ton/year New: Shutdown: 2003 Manufacturer: Configuration: 1987, upgrades in the late 1990's, early 2000's Billet: Products: Rebar: Rounds: Square: Hex: Flats: Angles: Controls: Drives: Schloemann, Hille Engineering, ABB, Ajax Semi-continuous, Reversing Roughing Stand plus 12 Continuous Finishing Mill 4" - 5" (102 - 127 mm) .5" - 1.2" (12.7 - 30 mm) .5" - 2.5" (12.7 - 63.5 mm) .625" - 2" (15.9 - 50.8 mm) .625" - 1.8" (15.9 - 45.7 mm) .25" x 1.5" - 1" x 4" (6.4 x 38.1 - 25.4 x 102 mm) 1" x 1" x .125" - 3" x 3" x .375" (25.4 x 25.4 x 9.5 - 76.2 x 76.2 x 9.5 mm) ABB master reference speed control system for tension free rolling Solid State ABB. Most motors and drives were replaced in 2000. Stand Number Type Roll Diameter Roll Width Motor 1 Horizontal 14.75" 20" 500 HP 2 Horizontal 14.75" 20" 500 HP 3 Horizontal 15.25" 20" 500 HP 4 Vertical 15.25" 20" 350 HP 5 Horizontal 15.25" 20" 500 HP 6 H-V Convertible 13.78" 22" 500 HP 7 H-V Convertible 13.78" 22" 500 HP 8 H-V Convertible 13.78" 22" 500 HP 9 H-V Convertible 13.78" 22" 500 HP 10 H-V Convertible 13.78" 22" 500 HP 11 H-V Convertible 13.78" 22" 500 HP 12 H-V Convertible 13.78" 22" 500 HP Main Components: 1. Billet Reheating Furnace: Ajax 4 zone continuous Induction Furnace: Zone 1: 4,000 kW, 10 coils Zone 2: 3,000 kW, 12 coils Zone 3: 3,000 kW, 12 coils Zone 4: 1,000 kW, 10 coils 2. Schloemann 2 Hi Reversing Roughing Mill: Roll diameter: 26" (660 mm) Roll width: 88.5" (2,248 mm) Motor: 2,000 HP Entry and exit Roller Conveyors 3. 12-Stand Hille Engineering (UK) Continuous Mill: Bsdpoyx Exiefx Akxjwl (3) Flying Crop and Dividing Shears Vertical Loopers in the Finishing Train4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" 4. Orbis Sizing Gauge 5. Water Quenching Line (used for sizes .75" to 2.25") 6. 120' Walking Beam Cooling Bed 7. CMI Product Saw driven by 300 HP DC Motor 8. Finishing Stand Setup Area (stands 6 to 12) 9. Spare rolls, chocks, bearing and other spares The Mills is still installed. The condition of the equipment is very goo

Condition: used, Year of construction: 1993, Technical details: x-travel: 7000 mm y-travel: 1200 mm z-travel: 1300 mm rapid travel x/y/z: 10 m/min table-size: 8.000 x 1.300 mm table load: max. 4 t/qm universal head: 5x90° plus manuell 1° tool taper: SK 50 milling head speed: 20 - 2.000 1/min power capacity: 30 kW max. torque on the spindle: Getriebe 2 stufig , 750 Nm control: HEIDENHAIN TNC 360 total power requirement: 50 KW dimensions of the machine ca.: 9,0 x 3,8 x 4,6 m weight of the machine ca.: 25,0 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, miscellaneous accessories (angle milling heads, vices...) on request approx. 39.000h "machine on", approx. 16.000h "spindle on" still under power in closed factory Bwjdpjyvfyyjfx Akxol *

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97G632, Offer 26031 Technical Data: Bjdpfx Akoyzytyoxowl - Cutting length: 3080 mm - Cutting thickness: 13 mm - Adjustable cutting angle: 0.5° - 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 - 23 min - Motorized backgauge up to: 750 mm - Front angle stop and support arms: 1000 mm - Control system: CYBELEC DNC 10 with input for sheet thickness in mm - Automatic cutting angle adjustment based on sheet thickness - Cutting length limitation - Automatic backgauge positioning - Rear area safety with light barrier - Drive: 400 V / 18.5 kW - Foot pedal - Space requirement: approx. W 3850 x H 1750 x D 1800 mm - Weight: approx. 10,500 kg

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Bjdpfx Akoyp Nyksxjwl Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Fork positioner opening range: 380 / 1245 mm Heater, full cab, full free lift, Platform height: 880 mm

Year of construction: 2012, condition: used, 0 17 m width of the strips 800 mm weight 7000 kg connected load . kW dimensions . m Box Filler 1000-65-3 Telescopic Belt Bijlsma Also available individually The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Bwodpfx Akeyqv Haexel We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), mileage: 285,500 km, power: 360 kW (489.46 HP), first registration: 01/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 5,990 mm, total width: 2,530 mm, total height: 3,960 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2023, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power mirror, seat heater, second fuel tank, spoiler, traction control, = Additional options and equipment = - Adaptive cruise control - Roof spoiler - Differential lock - Euro 6 - Height-adjustable steering wheel - Air conditioning - Leather steering wheel - Air suspension - Radio with MP3 support - Sleeper cab - Sun visor - Auxiliary heater - Power take-off (PTO) = Further information = General Information Number of doors: 2 Registration number: 59-BTP-8 Technical Information Number of cylinders: 6 Engine capacity: 12,777 cc Maximum front axle load: 8,000 kg Maximum rear axle load: 11,500 kg Weights Curb weight: 8,355 kg Payload: 12,645 kg Gross vehicle weight (GVW): 21,000 kg Interior Number of seats: 2 Bedpfx Ajyh I Arskxjwl Maintenance, history and condition APK (periodic technical inspection): valid until 03/2027 Technical condition: good Visual condition: good

Condition: new, sheet width 3100 mm plate thickness 16 mm Bwsdpfx Aeyv I Smjkxol pre-bending 13 mm upper roll diameter 330 mm lower roll diameter 300 mm side roll diameter 240 mm total power requirement 11 kW Overall size 5600x1650x1900 mm weight of the machine ca. 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: used, functionality: fully functional, We offer this used Wörner B 13 column drilling machine. Bedpfx Aksyzpypoxswl Manufacturer: Wörner Model: B 13 Machine No.: 26050 If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, mileage: 153,419 km, power: 226 kW (307.27 HP), first registration: 06/2015, fuel type: diesel, number of seats: 64, gearing type: mechanical, emission class: euro6, color: other, brakes: retarder, total length: 13,050 mm, total height: 3,500 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, = Other Options and Accessories = Bwjdpoyia Rkjfx Akxol - Retarder - Webasto = Further Information = Damages: none = Company Information = We are an international company based in Belgium, near Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking area that serves as a showroom. We always have a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can find the right coach, school, or city bus tailored to your needs and budget. All details are provided without guarantee. Subject to error, prior sale, and typographical mistakes. Opening hours for viewing used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: used, mileage: 380,000 km, power: 1 kW (1.36 HP), first registration: 01/2014, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space volume: 14 m³, loading space length: 3,860 mm, loading space width: 1,910 mm, loading space height: 1,960 mm, Year of construction: 2014, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * Deep-freeze box body * Cargo area dimensions: 3,860 x 1,910 x 1,960 mm * Right side door * Double rear wing doors * Carrier Xarios 500 refrigeration unit * In-transit cooling + 230 V standby cooling * 1 row of lashing rails * 6-speed manual gearbox * Euro 5 Bjdpjyy Elfjfx Akxowl * 3 seats * Air conditioning * Cruise control

Condition: good (used), Machine reamers, reamer, reaming tool, locating knife cutting set -Various sizes: Ø 13-33 mm Bedpjb A Rbvofx Akxswl -various: recordings -Sale: only complete set -Weight: 7.2 kg

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Bwsdpfsixt I Hox Akxsl Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Bsdofh Tmmopfx Akxjwl Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 3,000 kg, Paper Roll Clamp ISO Class: ISO Class 3 = 2,500 - 4,999 kg Bwjdpjyzdftjfx Akxol Technical Condition: good Description: Year 2008 ISO 2A / 3A Capacity 3,000 kg Rotator 180° Opening range 250-1,300 mm Width 770 mm Contact pads 400x250 mm ID OS1936

Condition: used, / / / / Heidenhain UV 101B Power Supply ID 317 559-13 Bsdpfx Asypwf Uekxowl Condition: used (functional) All technical specifications are subject to change without notice.

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine Tagliabue TA G-13-KS-DX 1350, year 1997. Configuration: 1pc. rubber cylinder 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Bwodsyzrpmopfx Akxjl Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 2 motors total power 40kW Condition very good ! Available immediately.

Condition: used, mileage: 1,057,000 km, power: 309 kW (420.12 HP), first registration: 01/2011, fuel type: diesel, maximum load weight: 13,800 kg, overall weight: 26,000 kg, tire size: 315/70r22.5, axle configuration: 4x2, wheelbase: 4,801 mm, brakes: intarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 7,940 mm, loading space width: 2,480 mm, loading space height: 2,720 mm, Year of construction: 2011, Equipment: ABS, air conditioning, car registration, compressor, cruise control, navigation system, onboard computer, parking heater, spoiler, tail-lift, traction control, VOLVO TRUCK 420HP FH12 FULL AIR SUSPENSION GLOBETROTTER Chassis No. YV2AG10C7BB575161 – Registration FJ274ZP Year: 05.01.2011 – EURO 5 EEV Mechanics: 420 HP – 1,057,641 km Automatic Transmission Bodywork: Exterior cab color BLUE / Interior cab color BLACK Bsdpfx Aen Nxzcskxswl Tyres: Rear 315/80 R22.5 – Front 385/80 R22.5 – Alloy Wheels STRUCTURE: Wheelbase 4800 + 1395 mm – Sleeper cab / high roof, twin bunk GLOBETROTTER version – Full air suspension front and rear – Steerable third axle with lift Gross vehicle weight: 26,000 kg – Payload: 13,800 kg TECHNICAL EQUIPMENT: VOLVO 420 HP engine, Euro 5, Steerable Third Axle with Lift, Rear Air Suspension, Front Air Suspension, Automatic Transmission, Differential Lock, ABS, Engine Brake with Retarder Function, Air Conditioning, Trailer Version with Towing Bell, Electric Windows, Air Suspended Driver's Seat, Fridge, Twin Bunk, Webasto, Parking Cooler BODYWORK: CURTAIN SIDED BODY with raising/lowering – Dimensions: Length 7.94 m x Width 2.47 m x Max Height 2.72 m Retractable Tail Lift

Condition: used, mileage: 203,000 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: automatic, first registration: 01/2020, emission class: euro6, color: white, number of seats: 14, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz Sprinter 514 / 515 with 13 + 1 seats & 6 standing places - Air conditioning - Automatic transmission - LED matrix system - * Diesel - 2,143 cc - 105 kW - 143 hp - Euro 6, ZF, PI/CI, N1 III, N2 - Green emissions sticker - New MOT - * 13 passenger seats + 1 driver seat - 6 standing places - Low-floor in the center section with extra-wide entrance door - * Auxiliary heater / Radio / ABS / ASR - Multifunction steering wheel - 9G Tronic automatic gearbox - * Vehicle dimensions: Length: 6,600 mm x Width: 2,020 mm x Height: 2,820 mm Bwedpex S A Axjfx Akxsl * Tire size: 225/75 R 16 C with single tires on front & rear axles * German vehicle - German registration papers - Sale on behalf of customer - * Errors / misprints & prior sale reserved * More pictures, including from the interior, will follow in the coming days - * For viewing & test drive please arrange an appointment * Contact: Andreas Vogel * ATTENTION - Vehicles are stored off-site - Please confirm exact location - ATTENTION -

Condition: used, functionality: fully functional, fuel type: diesel, axle configuration: 2 axles, wheelbase: 3,450 mm, axle spacing: 3,450 mm, fuel: diesel, energy efficiency: B, brakes: other, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Year of construction: 2025, IVECO 35S 13 2.3 MJT THREE-WAY TIPPER – WHEELBASE 3450, YEAR 05/2016, 332,193 KM, ENGINE DISPLACEMENT 2,287 cc, 1262 HP, 93 kW, EURO 5B, BODY LENGTH 3,530 mm, WIDTH 2,050 mm, HEIGHT 400 mm, ABS, ELECTRIC WINDOWS, 2 SEATS IN CAB. FOR INFO: FRANCESCO 3356514297 Bwjdex Nnyqjpfx Akxel

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Bsdoyqmvxjpfx Akxewl Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 1999, Technical specifications Ø: 1100 mm Bodpfov Tzxvex Akxewl Rectangular: 1300 x 1100 mm

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS Bodemfn Rujpfx Akxewl temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A PLC: Siemens S7 control cabinet: brand new - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new.

Condition: new, Year of construction: 2025, machine/vehicle number: MASM13T, Stock machine available immediately New Kaeser SM 13 T - 10 bar screw compressor with integrated refrigeration dryer with ECO-Drain (level-controlled condensate drain) Control: SIGMA CONTROL 2 Year: 2025 Pressure: 10 bars Rated power: 7,5 kW Delivery quantity at 10 bar: 1.08 m³/min Sound level: 65 dB(A) Compressed air outlet: 3/4" Dimensions length x width x height: 630 x 1090 x 1100 mm Bsdpfx Aksix Akpjxowl Weight: 315 kg Operating hours: 0 hrs Visit our store. We always have a wide range of new and used compressors in stock!