Used Evaporative Condenser for sale (1,165)

Condition: excellent (used), Year of construction: 2012, Brand : McQuay Model : PROXİMUS XE 450 Product Type : Water Cooled Chiller Cooling Capacity kW : 1757,0_kW/h Cooling Capacity Kcal/h : 1.511.000 kcal/h Evaporator : Shell & Tube Nljdpfx Aeilcqpskcea Condenser : Shell & Tube Refrigerant Gas : R-134a Compressor : McQuay Controller : Carel Dimension mm. : 1710x4220x2190 Empty Weight Kg. : 4957 Kg

Condition: excellent (used), Year of construction: 2008, Brand : McQuay Model : ALS393.4 Product Type : Air Cooled Chiller Cooling Capacity kW : 1400,0_kW/h Cooling Capacity Kcal/h : 1.200.000 kcal/h Evaporator : Shell & Tube Condenser : Alüminyum Kanat Bakır Boru Condenser Fan Qty : 20 Refrigerant Gas : R-134a Compressor : McQuay HSA220 Controller : Carel Dimension mm. : 10100X2230X2500 mm Empty Weight Kg. : 10348 Kg. Nledpfjilcqaox Akcja

Condition: like new (used), Year of construction: 2015, operating hours: 13,000 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS Brand: DAIKIN Model: EWADC22C-XS003 Cooling Performance Cooling Capacity: 1933 kW Cooling Capacity (Kcal/h): 1,720,000 Kcal/h Energy Efficiency Ratio (EER): 2.63 Seasonal Energy Efficiency Ratio (ESEER): 4.02 IPLV (Integrated Part Load Value): 4.47 Evaporator Type: Shell & Tube (Direct expansion) Max. Water Side Operating Pressure: 10 bar Water Volume: 850 liters Nominal Water Flow: 92.2 l/s Water Inlet/Outlet Temperature: 12.0°C / 7.0°C Connection Diameter: 273 mm Insulation Material: Closed cell Condenser Type: Aluminum finned, internally grooved copper tubes Fan Type: Propeller type, glass fiber reinforced resin Fan Diameter: 800 mm Number of Fans: 30 Fan Motor Power: 52.5 kW Fan Speed: 900 rpm Nominal Air Flow: 160,327 l/s Njdpfxouma The Akcola Compressor Type: Asymmetric single screw, semi-hermetic Model: 3 x HSA2690524 Quantity: 3 Oil Charge: 75 liters Control Mode: Stepless modulation (25% – 100%) Start Method: Star-Delta (Y-Δ) Refrigerant Type: R-134a Charge Amount: 360 kg Number of Circuits: 3 Dimensions and Weight Width: 2,285 mm Length: 14,785 mm Height: 2,540 mm Unit Weight: 12,600 kg Operating Weight: 13,470 kg Electrical Specifications Voltage: 400V / 3 Phase / 50 Hz Voltage Tolerance: 10% Nominal Running Current: 1100 A Max Starting Current: 1486 A Max Current for Wire Sizing: 1608 A Control and Automation Control Panel: MicroTech III Remote Monitoring: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Temperature Regulation Accuracy: 0.1 °C Advanced Protection: High/low pressure, oil pressure, motor temperature, freeze protection, phase monitoring Sound Level Sound Power: 104 dB(A) Sound Pressure: 81 dB(A) 1 meter distance

Condition: reconditioned (used), Year of construction: 2022, Trane | RTAA270 | Water Cooling System | | Brand | TRANE | | Model | RTAA270 | | Cooling Capacity kW/h | 1000 kW/h | | Evaporator | Shell & Tube | | Condenser | AI Finned Cu Tube | | Compressor | Helical Screw | | Compressor Model | 2 x CHHB0100 - 1 x CHHB070 | | Control | Compatible Control Microprocessor | | Dimensions mm. | 2285x9800x2540 mm | | Weight | 9096 Kg | Product Information Nodpfx Aoiphmcjkcjla Trane is a rebuilt chiller, a Trane water-cooled chiller with two-stage three-screw compressors. This chiller is equipped with a Trane Tracer Compatible Control Microprocessor. The rebuilt chiller works with a guaranteed start-up, tested from A to Z, at the specified capacity of +7/12°C water temperature and +35°C ambient temperature. ABOUT OUR COMPANY ; We offer for sale the cooling products "Chiller" which we have obtained as a result of our production process. Our "Chiller" products, which are provided by leasing or by re-production, are tested for their performance characteristics (current, pressure and tightness) before being shipped. In addition, we provide the necessary electrical and water pipe installation project for the installation and operation of the products to the purchasing companies. We also provide our customers with a guarantee for any problems that may arise during the operation of our products on site. In this way, our customers are fully assured during the installation and operation process of their units. #Trane #RTAA270 #WaterCooling #Chiller #Screw #Compressor #Tracer #Compatible #Control #Microprocessor #Installation

Condition: good (used), Year of construction: 2020, Heat exchanger, rotary heat exchanger, exhaust air heat exchanger, microchannel heat exchanger, microchannel tube heat exchanger, condenser, evaporator coil, MCHE -Manufacturer: SunCo, microchannel heat exchanger -Type: SC-1800 Njdpeyh Ebrsfx Akcola -Heat exchanger: made of aluminum tubes with aluminum fins -Connection: with copper pipe, see photos -Dimensions: 1210/1150/H40 mm -Weight: 16.8 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 301 kW (409.25 HP), We offer a complete package of process vessels and key equipment forming part of an industrial ammonia refrigeration machine room, including one twin-screw compressor unit for -40°C operation, together with the main NH₃ vessels and auxiliary equipment, all manufactured in 2007. The set is suitable for industrial refrigeration applications including compression, oil cooling, intercooling, oil separation, liquid separation, condensation, liquid distribution, and oil collection. Nedpeyrrpyefx Akcsla Main equipment included: Twin-screw compressor unit GEA Grasso Duo-Pack PB-3A for -40°C operation — complete compressor package with two screw compressors mounted on a common frame. Technical data from the attachment include: refrigerant NH₃, refrigeration capacity 301 kW (with economizer), shaft power 2 × 104 kW, motor power 2 × 132 kW, speed 2940 rpm, evaporating temperature -40°C, condensing temperature +35°C, economizer temperature -22°C, dimensions 3830 × 2370 × 2300 mm, weight 6380 kg, suction connection 2 × DN 125, discharge connection DN 100, and oil charge 160 kg. Oil cooling system: ammonia thermosyphon. Control system: GSC Oil cooler for screw compressor unit, serial no. 170049, design pressure 23/23 bar, volume 96 / 70 dm³, temperature range 0/+60°C and 0/+100°C, working media ammonia / oil + NH₃. Economizer / intercooler vessel, serial no. 19103, allowable pressure 12 bar, volume 1000 dm³, temperature range -40/+100°C, working medium NH₃. Oil separator, serial no. 5281, design pressure 23 bar, volume 0.620 m³, temperature range +5/+110°C, working medium NH₃ + oil. Horizontal liquid separator, serial no. 19102, allowable pressure 12 bar, volume 3400 dm³, temperature range -40/+50°C, working medium NH₃. Evaporative condenser coil, serial no. H070979, design pressure -1/23 bar, volume 638 dm³, temperature range -20/+120°C, working medium NH₃, capacity 745 kW. Thermosyphon / liquid receiver, serial no. 19100, allowable pressure 18 bar, volume 620 dm³, temperature range +1/+100°C, working medium NH₃. Oil drain tank, serial no. 19104, allowable pressure 18 bar, volume 70 dm³, temperature range -40/+150°C, working medium oil + NH₃. The equipment is suitable for reuse in industrial refrigeration systems, retrofit projects, or as a source of high-value NH₃ machine room components, subject to technical verification and local compliance requirements. Important note: The installation is not dismantled, the potential buyer must include the costs of dismantling.

Year of construction: 2014, condition: used, This listing is for a Full Mueller PyroPure WFI System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This system is in immaculate condition as the sites steam requirements were “Turned on Time”of the Steam Generator's is 65,000 hours, but as this unit is 1 of 2 generators in an alternating system it does not indicate the "Steam Production Time". The Mueller PyroPure WFI System stands out as a high-performance, integrated solution for the pharmaceutical and biotechnology industries, focusing on the production, storage, and distribution of ultra-high-purity Water for Injection (WFI). Below is an in-depth look at its components, capabilities, and specifications. Nodpfx Aksxv Af Ejcjla Key Components 2x Mueller P7310 Pure Steam Generator High Capacity: Generates from 0 to 700 kg/hr of pure steam, suitable for high-volume operations. Operational Flexibility: Can operate alternately with another unit of the same model, maximizing efficiency and reducing downtime. Regulatory Compliance: Meets USP WFI standards, ensuring suitability for pharmaceutical applications. Maintenance-Friendly Design: Features an external evaporator for easy access and servicing, minimizing contamination risks. Advanced Control: Equipped with an Allen Bradley Compact Logix PLC and an intuitive operator interface terminal (OIT) for real-time monitoring and control. Safety Mechanisms: Includes pressure relief valves and temperature controls to ensure safe operation. Energy Efficiency: Designed to optimize energy consumption, especially when alternating operations between units. Durable Construction: Made from high-quality stainless steel for longevity and hygienic conditions. 1x Mueller P4003 Pure Steam Condensing System Condition: This unit is in full working condition and ready for immediate release. Installed new in 2015 by Freestead Process Technology. Capacity: Produces 100 gallons per hour (379 litres per hour) of WFI-quality distillate, with a pure steam inlet capacity of 807 lb/hr (366 kg/hr). Compliance: Meets stringent USP WFI standards, is CE marked, and FDA compliant with 3.1B material certification. Core Features: Utilizes a tangential nozzle design for superior impurity separation. Drainable components to minimize contamination risks, with electro-polished 316/316L stainless steel ensuring hygienic operation. Easy maintenance due to a removable tube bundle in the condenser and minimal instrumentation, requiring just 24 inches of clearance for service. 1x Ormandy Newade WFI Storage Vessel Condition: This 2000L WFI storage vessel is also in full working condition, installed in 2015 by Freestead Process Technology. Capacity: Perfectly balances storage efficiency for mid-sized operations with its 2000 litres capacity. Design Flexibility: Available in both horizontal and vertical configurations, customisable based on specific facility layouts. Material Excellence: Made from high-grade austenitic and Duplex stainless steel, ensuring durability and resistance to corrosion. Compliance: Adheres to key industry standards such as PD5500, ASME VIII, and EN 13445, and is CE marked under the Pressure Equipment Directive. 1x Fristam FPE742/185A Centrifugal Pump Condition: This robust 5.5KW sanitary pump is operational and ready for immediate use, also installed in 2015 by Freestead Process Technology. Hygienic Design: Features close internal clearances (as ...

Condition: good (used), Large-scale system for climate tests with S!MCON control Design The system consists of the following main components: - Walk-in, insulated test room - Air treatment room - Machine unit - Air conditioning system - Control cabinet Test room The fixtures in the test room are made of corrosion-resistant material. The test room can be illuminated, is walk-in, and has a condensate and cleaning drain. Air treatment room The air treatment room is located behind the air baffle in the insulated interior. It contains the following components necessary for temperature control and is accessible via easily removable panels. - Test room fans - Heat exchangers - Electric heaters - Ventilation and exhaust system - Temperature sensors In the air treatment room, the air is tempered (cooled/heated), humidified and dehumidified, and circulated by fans. The air is drawn in under the ceiling and expelled at floor level. Sensors Nsdpfxsw U Sv Ej Akcola The temperature and humidity sensors are located behind the air baffle in the air treatment room. Machine Unit The machine unit, consisting of refrigeration units, supplies the air treatment room with the required energy. Climate System The climate system consists of: - Steam humidifier - Dehumidification evaporator Technical Data Test chamber volume: approx. 32 m³ Direct temperature range: -40 to +100°C Temperature fluctuation over time in the center of the usable space: +/- 0.5 to +/- 1 Temperature change rate Heating: from -35°C to +50°C at 3 K/min Cooling: from +85°C to +85°C at 2 K/min from +80°C to -40°C at 1 K/min Data for climate testing Temperature range: 10 to 95°C Humidity range: 10 to 95% RH Dew point range: 5 to 93°C Temperature fluctuation: +/- 5°C Humidity fluctuation: +/- 3 to +/- 5% RH Cooling water specifications Connections Inlet: 2 x 1 1/2" RH Return: 2 x 1 1/2" RH Consumption at full load: max. 16 m³/h Maximum load on the test chamber floor: 10,000 N/m² Nominal voltage: 3/N / PE AC 400 V 50 Hz Nominal power: 97 kW Nominal current: 148 A Dimensions: Test chamber: Width 3.60 m, Height 2.20 m, Depth 5 m Climate chamber divided for transport at a specified location (approx. 2.50 m). Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer Nedpfeu D Ariox Akcsla If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: as good as new (ex-display), Year of construction: 2024, The ENR series are air-cooled water chillers for industrial use for indoor and outdoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminium fins and self-cleaning coaxial evaporator for maximum reliability. Cooling capacity 13,5 Kw Nledpefmd E Sefx Akcsa We have many chillers directly from stock available used and new . contact us for a non-binding offer.

Condition: ready for operation (used), A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible. Nledpfx Aksv Sugqjcoa

Year of construction: 2011, condition: ready for operation (used), A compact ammonia refrigeration system GEA with evaporative condenser and pump-operated plate evaporator is available. Design: split design, refrigeration capacity: 247kW, compressor speed: 1450rpm, evaporation temperature: 0.7°C, condenser capacity: 300kW, wet-bulb temperature: 21°C, max. condensing temperature: 35°C, refrigerant: NH3, max. operating pressure high pressure/low pressure: 23bar/16bar. Secondary refrigerant: electrolysis water, secondary refrigerant temperature inlet/outlet: 6°C/2°C, secondary refrigerant volume flow: 54m³/h, secondary refrigerant pressure drop: 53kPa, refrigerant charge: 50kg, oil charge: 20l, compressor: Grasso 410. Machine dimensions X/Y/Z: approx. 4300mm/2000mm/2800mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible. Nledpsx Sywajfx Akcja

Condition: used, 2x Alpha-18-W-S units with integrated redundant pump station Standard Hyfra Equipment: * Frame construction in stainless steel * Economical, low-noise scroll compressors * Pump installed inside the housing; Note: Required inlet pressure: min. 0.05 bar! * Unit fitted with control transformer, no neutral conductor necessary * Flow switch Nljdpfxew I Epre Akcja * Frost protection monitoring * Fault message with digital display * Collective fault signal, potential-free * External start/stop * Automatic fan speed switching from low to high speed * High-efficiency condenser with microchannel technology * Non-cleanable plate evaporators for water Special Equipment: Cooling capacity approx. 25 kW at +13°C tank temperature and +32°C ambient temperature Medium: Water Water-carrying lines insulated Cooler designed according to current ECO Design Directive 2021 (adapted compressor, condenser, evaporator) Housing dimensions LxWxH 1640 x 715 x 1560 mm 2 x CM3-4 pumps for tank circulation, each with 3.5 m³/h at 1 bar 2 x CM5-5 process pumps (redundant design) each with 4.5 m³/h at 3.5 bar 2 x EC fans with approx. 100 Pa external pressure for short site-installed air ducts Flexible duct sleeves for easy connection to a site-installed air duct system Mounted control cabinet 2 x supply and return connections.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. Nledpfjmt Dcxjx Akcsa 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 7000 l/min Power 1.37 kW Power supply voltage 230 V Dimensions (L x W x H) 1000 x 550 x 920 mm Weight 95 kg Type and amount of refrigerant R410a, 900 g

Year of construction: 2026, condition: new, functionality: fully functional, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger Nledpfx Akjmt Dcqecea In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1 1/2" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 3800 l/min Power 0.9 kW Supply voltage 230 V Dimensions (L x W x H) 850 x 480 x 480 mm Weight 59 kg Type and amount of refrigerant R410a, 650 g

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Nsdpfx Aomt Dbhekcjla Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Year of construction: 2026, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Nodpsmt Dcfjfx Akcjla Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: good (used), Year of construction: 2021, Hyfra Gamma 13 Active Immersion Cooler, Year 2021, Immersion coolers are designed for the cooling of water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and suitable for integration into various machine layouts. A stirrer ensures uniform medium temperature in the Gamma immersion cooler model. Easy cleaning is facilitated by crane eyes on the cooling unit. The HYFRA Gamma series models are designed as immersion coolers for cooling water, oil, and emulsions. The plug-and-play immersion coolers are ready for installation and can be used with a footprint of just 0.5 m². This makes them ideal for integration into different machine layouts. Thanks to their compact design, cooling capacities of up to 28 kW are possible with only 0.5 m² of floor space. This results in significant flexibility advantages in production floor planning and a marked increase in productivity, as more machines can be accommodated. In the compact models of our immersion coolers, the condenser is installed horizontally. Due to this design, the coolers generate considerably less waste heat. Internal components remain unaffected by residual heat. Nodpeyfutzofx Akcjla A robust stirrer ensures uniform medium temperature in the lubricant tank in all immersion cooler models of the series. The HYFRA Gamma series can be easily removed from the tank for regular cleaning using the fixed crane eyes. Immersion Coolers: High-Performance Cooling Directly at the Application Site How does an immersion cooler work? In immersion coolers, the evaporator is immersed directly into the cooling medium. The liquid is held in a tank and is agitated vigorously and continuously for efficient cooling. Powerful stirrers support this process. What are immersion coolers used for? Immersion coolers are commonly used for temperature control of coolant lubricants in filtration and mechanical engineering to ensure the performance of connected equipment. They are also used in metalworking for indirect cooling of tools and workpieces. Typical applications include CNC and conventional machine tools for milling and grinding. Immersion coolers with modern controls and extensive features Depending on the required cooling capacity, HYFRA Gamma immersion coolers are equipped with either FreeSmart or FreeAdvanced control systems. The combination of FreeAdvanced control and a touch panel provides a structured overview and allows real-time monitoring of relevant parameters. Both freely programmable controllers come with multiple digital and analog inputs and outputs. The FreeAdvanced controller also features a full-text display and supports Modbus-TCP.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 18.8 kW (25.56 HP), RegloChill RC2E 20 warehouse no.: 503608 type / device: chiller manufacturer: RegloChill type: RC2E 20 year of construction: 2016 - Ecological refrigerant R407C - High efficiency rotating Scroll motor compressor groups - Molecular sieves dehydrating filter - Liquid level sight glass - High efficiency copper tube aluminum finned condenser - Solenoid valve - Safety pressure switches for high and low gas pressure - Copper evaporator, with high efficiency water-gas exchange stainless steel plates Nodpfx Akexz Dt Iecola connection power: 12 A cooling medium: R407C cooling capacity: 18,8 kW voltage: 400 V - 50 Hz

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. Nodpfexvca Aox Akcela B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: water, overall weight: 4,600 kg, input frequency: 50 Hz, Equipment: compressor, cooling unit, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller year of construction:2008 Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Nsdpfxsula Tro Akcsla Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: good (used), Year of construction: 2009, functionality: fully functional, cooling capacity: 495 kW (673.01 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,550 kg, input voltage: 400 V, total width: 2,450 mm, total length: 5,050 mm, total height: 2,750 mm, input current: 170 A, input frequency: 50 Hz, Equipment: compressor, freezer, Used, well maintained Trane RTAC 140 Air-cooled Helical-Rotary Liquid Chiller Brand Trane RTAC 140 Product type Air Cooled Chiller Capacity kW 491.9 Refrigerant HFC 134a Refrigerant Circuits 2 Evaporator Model EH140 2x Trane CHHP012TKEON092A compressors Water Storage l 112 Minimum Flow l/s 13 Maximum Flow l/s 44 Number of water passes 2 Condenser Fans Quantity (1) 4/4 Diameter mm 762 Total Air Flow 35.45 m3/s Refrigerant Freon Refrigerant Type R 134 A 74kg Nlodet Tfbqepfx Akcja Weight in kg. 4500 Sizes 5041x2260x2750mm (LxWxH)

Condition: used, This listing is for the Techne TC 3000 Well Thermal Cycler The unit is in full working condition and is ready for immediate use The Techne TC‑3000 (models FTC3/02 and FTC3/05) is a compact, robust, and cost-effective PCR thermal cycler, ideal for personal use, educational settings, and basic molecular biology research. Despite its small footprint, it delivers high performance, reproducibility, and flexibility. Nlodpfx Aksxhfzascoa Key Features Compact and Low Cost One of the smallest and most affordable thermal cyclers on the market. Weighing ~5 kg with a footprint of just 33 × 17 cm, it's perfect for labs with limited space. Available with interchangeable blocks: FTC3/02: 25 × 0.2 mL microtubes FTC3/05: 20 × 0.5 mL microtubes Fast Peltier-Based Cycling Efficient thermal transfer with rapid heating (up to 3.6 °C/s) and cooling (up to 2 °C/s) using advanced Peltier elements. Heated Lid with Selectable Temperature Adjustable from 100–115 °C, the heated lid minimizes condensation and reduces the risk of sample evaporation. It can be enabled or disabled as needed, making it suitable for a range of PCR tubes and strip types. Unparalleled Block Uniformity Delivers consistent results with ±0.1 °C block uniformity at 50 °C, ensuring optimal reproducibility across samples. Wide Temperature Range From 4 °C to 99 °C with precision control (±0.1 °C), supporting even demanding PCR protocols.

Condition: used, This listing is for a Shell Lab SC05A-2 CO2 Series CO2 Incubator. The unit is in full working condition and is ready for immediate release. The Shell Lab SC05A-2 CO2 Incubator is expertly designed to meet the stringent requirements for sensitive tissue and cell culture applications. Here’s a concise look at its key features and specifications: Key Features: Fast CO2 Recovery: The infrared (IR) CO2 sensor swiftly restores CO2 levels after door openings, essential for maintaining pH stability in cell cultures. Exceptional Temperature Uniformity: With a unique air jacket design, it delivers outstanding temperature uniformity of ±0.25°C at 37°C, crucial for consistent incubation conditions. Humidity Control: Maintains humidity levels through evaporation, allowing for up to 95% relative humidity—perfect for sensitive cultures that require a moist environment. Advanced Contamination Control: Patented Copper-Caged HEPA Filter: Enhances air quality by trapping contaminants while utilizing copper's antimicrobial properties. Heated Door: Reduces potential condensation on the inner glass, maintaining temperature integrity. Heated Copper CO2 Inlet: Prevents moisture from entering the chamber, further safeguarding culture conditions. Durable & Easy to Clean: The stainless steel interior ensures longevity and simplifies maintenance, while the autoclavable shelving provides additional sanitation options. Data Logging Capabilities: Enables tracking of environmental conditions for compliance and research documentation. Technical Specifications: Model: SCO5A Part ID: SCO5A Exterior Dimensions: 27.5" W × 28.5" D × 37.8" H (699 mm × 724 mm × 960 mm) Interior Dimensions: 20.5" W × 19.8" D × 21.5" H (521 mm × 503 mm × 546 mm) Volume: 5.0 . (142 L) Shelf Dimensions: 19.1" W × 17.8" D (485 mm × 251 mm) Unit Weight: 200 lbs (91 kg) Interior Metal: 300 Series Stainless Steel Exterior Metal: Painted Cold Roll Steel Operating Temperature Range: Ambient +5°C to 60°C Temperature Uniformity (Midrange): ±0.25 °C Nodpoxxygxsfx Akcela Temperature Stability (Midrange): ±0.1 °C Controller Type: Digital Display Resolution: 0.1 °C Power Requirements: 110-120 VAC, 50/60 Hz, 6.0 Amps Safety Certifications: UL 61010-1, EN 61010-1, CSA 61010-1, CE

Condition: used, System Overview A complete, cGMP-compliant Water for Injection (WFI) generation and storage system. Produces high-purity, endotoxin-free water for pharmaceutical and biotech applications via multiple-effect distillation. This item can be crated and shipped internationally. Please contact us for a quotation ----- Nedpfx Akoxqq Dxscola Main Components - Finn-Aqua 200-S3 Distillation Unit – three-effect evaporator/condensers with falling-film design, pyrogen separation, and continuous blowdown. - 600 L WFI Storage Tank – 316L stainless steel, atmospheric vent filter, level and temperature sensors. - 600 L Jacketed Holding Tank – 316L stainless steel, insulated, steam/hot water jacket for temperature control. - WFI Distribution Pump – sanitary centrifugal pump for loop circulation. - Utility Connections – plant steam (3–8 bar), cooling water, feed water, condensate return, and instrument air. - Instrumentation – pressure, temperature, conductivity, and level transmitters with safety and relief valves. - Control Panel – PLC-based automatic operation, alarm handling, data logging, and local/remote control. ----- Key Features - Multi-effect distillation for high purity and energy efficiency. - Degassing and three-stage separation for endotoxin removal. - Fully stainless, drainable, and sanitary construction. - Compact, skid-mounted design with integrated utilities. - Designed for validation and GMP compliance (USP/EP WFI quality).