Used Hartmann Hm 585 for sale (1,848)

Condition: used, Year of construction: 1998, sheet width:130 mm coil weight:0,150 t coil internal dia.:300 mm coil external diameter:1000 mm dimensions of the machine ca.:0,75 x 1,50 x 1,70 m volt:230 V total power requirement:0,25 kW weight of the machine ca.:0,3 t Njdpfoh Ra I Tox Akcola Motor-driven Decoiler with mechanical central expansion, stepless coil speed, tip switch, emergency cut-off.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 291257-100, MACHINE DETAILS Nlodpsxyizhsfx Akcja Net weight: 23,500 kg / 8,500 kg Hydraulics – Operating pressure: 231 bar Electrical data Motor rated current: 109 A Control voltage: 230 V Frequency: 50 Hz

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. Nljdpfx Akepy Dxrscsa The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Manufacturer: AMIXON (Ruberg Mischtechnik KG) Nsdpfx Aowr Dhcjkcela Model: HM 400 Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133404-100, clamping force: 3,000 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, injection weight: 600 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar spacing (H x W): 710 x 610 mm Minimum mould height: 375 mm Nedpfsx A Df Tsx Akcola Maximum mould height: 375 mm Maximum opening stroke: 1,150 mm Injection Unit Screw diameter: 55 mm Shot volume: 653 cm³ Shot weight: 600 g Injection pressure: 2,040 bar MACHINE DETAILS Weight: 12,200 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 112,163 h, functionality: fully functional, clamping force: 2,700 kN, screw diameter: 55 mm, injection pressure: 2,040 bar, ejector stroke: 200 mm, TECHNICAL DETAILS Clamping unit Clamping force: 2,700 kN Platen size (H x W): 1,030 x 1,020 mm Tie bar spacing (H x W): 710 x 630 mm Min./max. mould height: 350 mm Max. opening stroke: 1,150 mm Locating ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 55 mm Shot volume: 650 cm³ Shot weight: 565 g Injection pressure: 2,040 bar Max. injection speed: 144 mm/s MACHINE DETAILS Operating hours: 112,163 h EQUIPMENT Nsdpox A Dbbjfx Akcjla Pneumatic valve Core pulls (3 pcs.)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 134022-100, clamping force: 3,000 kN, screw diameter: 60 mm, injection pressure: 2,040 bar, injection weight: 840 g, TECHNICAL DETAILS Clamping Unit Clamping force: 3,000 kN Platen size (H x W): 1,020 x 1,030 mm Tie bar distance (H x W): 710 x 630 mm Minimum/maximum mold height: 375 mm Maximum opening stroke: 1,175 mm Injection Unit Screw diameter: 60 mm Shot volume: 913 cm³ Shot weight: 840 g Injection pressure: 2,040 bar MACHINE DETAILS Net weight with control cabinet: 12.2 t EQUIPMENT Nlsdex A A S Ejpfx Akcsa The machine can be inspected and tested under power. Additional photos and videos available upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2005, Battenfeld HM 3500 /1900 Injection Moulding Machine Year: 2005 Clamping Unit: Clamping force: 3,500 kN Platen dimensions (H x V): 1,100 mm x 1,060 mm Tie bar distance (H x V): 800 mm x 710 mm Njdpjw Dcxdefx Akcela Mould opening stroke: 670 mm Minimum mould height: 375 mm Maximum mould height: 710 mm Daylight: 1,380 mm Ejector stroke: 250 mm Ejector force: 81 kN Injection Unit: Screw diameter: 55 mm L/D: 22 Injection pressure: 2,481 bar Screw stroke: 325 mm Shot volume: 772 cm³ Injection weight (PS): 710 g Injection speed: cm³/s Screw speed: 294 rpm Max. plasticising rate: 68 g/s Number of heating zones: 1 + 5 Electrical & Hydraulic Equipment: Installed heating power: 45 kW Pump capacity: 26.6 kW Tank volume: 660 l Machine Dimensions & Weight: Approx. dimensions: 7.53 m x 1.79 m x 2.31 m Total machine weight: 15,200 kg

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Njdpfxsxyqxuj Akcela Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 Injection Moulding Machine Brand: Battenfeld Model: HM 300/1330 Year of manufacture: 2011 Category: Injection Moulding Machines The machine is in very good technical condition, fully operational, and ready for immediate use. Ideally suited for industrial production requiring high performance and reliability. Clamping Unit Clamping force: 3000 kN Platen dimensions (H × W): 1020 × 1030 mm Tie bar spacing (H × W): 710 × 610 mm Minimum / maximum mould height: 375 mm Maximum platen opening: 1150 mm Injection Unit Screw diameter: 55 mm Injection volume: 653 cm³ Shot weight: 600 g Injection pressure: 2040 bar Dimensions and weight Length × width × height: 12.2 m The machine is available for inspection and testing under power. Photos and demonstration videos can be provided upon request. Loading and transport can be arranged. Nlsdsxyqw Rjpfx Akcea

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight: 4.500 kg Specification: 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons Nledpfx Akewq D Nqecoa - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.

Condition: excellent (used), Year of construction: 2011, Battenfeld HM 300/1330 injection molding machine Control: B6S Year of manufacture: 2011 Operating hours: 68038 Closing unit: Closing force [kN]: 3000 Clamping plate dimensions (hxv) [mm]: 1020 x 1030 Clearance between columns (hxv) [mm]: 710 x 610 Min./max. mold height [mm]: 375 Maximum opening width [mm]: 1150 Centring ring diameter [mm]: 160 Maximum ejector stroke [mm]: 200 Injection unit: Nodpfx Akewrmqmecjla Screw diameter [mm]: 55 Injection volume [cm3]: 653 PS injection weight [g]: 600 Injection pressure [bar]: 2040 Maximum injection speed: 144 Additional equipment: Pneumatic valve - 4 pcs. Core - 2 pcs.

Year of construction: 2025, condition: new, The hammer mill HM 300 is ideally suited for grinding soft, medium-hard, brittle materials such as catalysts, electronic scrap, gypsum, epoxy resin and many more. Max. Feed size Nlsdpfsf Ulynox Akcea

Year of construction: 2025, condition: new, The LITech hammer mills HM 120/200/300/400 are ideal for the pre-shredding of medium-hard, hard-tough & brittle materials such as floors, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and much more many more!! Nodpfjg Ay Dhjx Akcela

Year of construction: 2024, condition: new, The LITech HM 120 / 200 / 300 / 400 hammer mills are ideal for the pre-crushing of medium-hard, tough & brittle materials such as soil, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and very many more!! Njdogkr E Hjpfx Akcela

Condition: excellent (used), Year of construction: 2010, Hotmelt, heated edge banding machine. Heated tank Heated hose Heated gun Tank capacity: 45 liters Excellent condition, as shown! Can be inspected and tested at our premises, available for immediate pickup! Njdpfx Akoxbnkdecjla

Condition: used, Year of construction: 2003, Steam boiler used Manufacturer: Viessmann Type: Vitomax 200 Year of manufacture 2003 Nledpfxofm E Ifo Akcsa Nominal heat output: 375kw Boiler water capacity:1400l Operating overpressure: 8 bar Gas burner Weishaupt G/1E -Version ZMD-LN Power 80-550KW: year of construction: 2003 Connection pressure 15-500mbar. With existing fittings Dungs DN40 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Nljdpfx Akex Ddc Iecoa Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: good (used), mileage: 592,778 km, power: 331 kW (450.03 HP), first registration: 09/2019, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 4x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,300 mm, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - Carplay - Digital tachograph - Tachograph (control unit) - Halogen lamp - High roof - Manual - PTO (power take-off) - Pump - Radio/cassette - Slider - Lane departure warning system - Cloth (seat upholstery) - Additional brake system Number of axles: 2, Axle configuration: 4x2, Unladen weight: 8,805 kg, Gross weight: 20,500 kg, Total tank capacity: 1,000 liters, Fifth wheel height: 118 cm, Fifth wheel: slider, Number of locks: 1, Suspension type: full air, Cab type: high roof, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, Color: red, Heated mirrors, Lighting: halogen lamp, Lane departure warning system, Air conditioning, Seat heating, Bluetooth, Flashing lights, Engine power: 331 kW (444 hp), Fuel: diesel, Euro 6, Transmission type: Opticruise, Transmission make: Scania, Gears: 12, Additional brake system, Retarder brand: Scania, Power steering, ABS, ASR, PTO (power take-off), PTO type: 1, Starter battery, Pump, Central locking, Seating: 1+1, Upholstery: cloth, Seat adjustment: manual, Crane, Crane manufacturer: HMF 1720 K4, Year of crane: 2012, Crane lifting capacity: 17,000, Number of support legs: 2, CE certified, Control position: left side operation, Crane position: behind cab, sliding: 4, sliding: 1, Hydraulic auxiliary connection: none, Load hook, R450 A4X2NB / GRS905R RETARDER / CRANE HMF 1720 K4 2012 YEAR, 4X HYDR. + 1X MANUAL Transmission Transmission: SCA, 12 gears, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tread left: 6 mm; Tread right: 6 mm Axle 2: Tire size: 315/70R22.5; Twin tires; Tread left inside: 6 mm; Tread left outside: 8 mm; Tread right inside: 7 mm; Tread right outside: 7 mm Weights Unladen weight: 8,805 kg Payload: 11,695 kg Gross vehicle weight: 20,500 kg Functional Crane: HMF 1720 K4, year 2012, behind the cab Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Nledpfxsy Hgp Sj Akcja Financial information Lease price: €973 per month (default, 60 months); Please inquire for further details and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our selection includes all European brands, years of manufacture, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-rotating stock • Recognisable quality • Good prices • Fair trading • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of “recognisable quality” • And much more ... Please visit our website for special offers and full stock list: Leasing via Kleyn Trucks is possible in most European countries!

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, steady rest -Roller diameter: Ø 100 mm Nedpfx Aed Tx Eyskcsla -Axle spacing: 140 mm -Dimensions: 320/120/H260 mm -Weight: 29 kg

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding turntable -Max. diameter: 430 mm -Drive: 0.18 kW -Speed: min. 0 mm/min Nlodpfx Akob A Nptscja -Speed: max. 1190 mm/min -Adjustable: electronic -Foot switch -Dimensions: 1100/600/H1600 mm -Weight: 166 kg

Condition: good (used), Toggle bolt, anchor hook -Type: EKD-HM4 -Quantity per package: 50 pieces -M4 threaded rod -Price: per package -Number of packages: 12 Nsdpfx Ajb A Hibjkcela -Weight: 1.2 kg/package

Condition: used, Year of construction: 1988, Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips. Accessories: Partial enclosure, 1 sawblade holder, Coolant system. Nodpfx Akeyv Ic Sscela Circular saw outer diameter: 260 to 2200 mm Circular saw bore diameter: 25 to 220 mm sawblade thickness: up to 20 mm Tooth pitch: from 10 mm rake angle: any Radial free angle: up to 6° Tangential free angle: up to 6° Grinding path: up to 75 mm Grinding speed: 0.5 to 6 mm(s) Working speed: up to about 10 teeth/min Grinding wheel diameter: 125 mm Grinding wheel bore diameter: 32 mm Grinding wheel peripheral speed: 26 m/s Cooling lubricant pump capacity: 250 l/min Coolant Tank Content: approx. 190 l Connected load approx.: 6,5 kW (400 V / 50 Hz) Dimensions W x D x H =: 3050 x 1890 x 2050 mm Weight approx.: 2160 kg colour: green

Condition: used, Year of construction: 2000, overall weight: 260 kg, table diameter: 70 mm, Rotary Table Njdpoy Eglksfx Akcela Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, mileage: 167,000 km, power: 107 kW (145.48 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, loading space length: 4,270 mm, loading space width: 2,250 mm, loading space height: 2,250 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Fuel tank: 80 litres, full wheel covers, seats in the driver's cab: single passenger seat, seats in the driver's cab: lumbar support driver's seat Nlsdpfx Akey D Inkecea Other equipment: Storage gallery, airbag driver's side, electric outside mirror. adjustable and heated, outside temperature display, brake assistant, tachometer, electric brake force distribution, rear wing doors without glazing, interior filter: pollen filter, body/structure: high-space box, radiator grille with chrome surround, loading area partition, height-adjustable steering column (steering wheel), model update (2), engine 2.3 ltr. - 107 kW dCi Diesel FAP Energy KAT, wheelbase 3682 mm, tire repair kit, low emissions according to Euro 6d-TEMP emissions standard, gearshift point indicator, sliding door loading/passenger area on the right, front mud flaps, side protection strips, seat cover/upholstery: fabric, seats in the driver's cab: height-adjustable driver's seat, engine start/stop system, LED daytime running lights, lashing eyes on the loading area floor, heat-insulating glazing, permissible total weight 3.50 t. Payload 1130 KG Interior dimensions of cargo area complete: L 4.27 W 2.25 H 2.25 meters Width between wheel arches: W 1.35 meters Length from front to wheel arch: L 2.30 meters Length from wheel arch to wing doors: 1.10 meters The vehicle is in good condition!