Used Citizen M16 for sale (433)

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Stroke: 20 mm -Piston diameter: 16 mm -Piston rod: 6 mm -Price: per piece Cgedpfx Anofbbttowot -Number: 7x pieces -Dimensions: 92/32/H21 mm -Weight: 0.15 kg/piece

Condition: used, differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch, pressure switch, low pressure switch, pressostat -Manufacturer: Telemecanique, pressure switch unused Ovp -Type: XM2-JM 160 -Number: 1x pressure switch available -Price: per piece -Dimensions box: 180/70/H70 mm Cgedpfxsuza Txe Anwet -Weight: 0.8 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: AEG, electric motor type AM160 MV4 Ex -Power: 10 kW -Speed: 1465 rpm Codot Apnyopfx Anwegt -Shaft: Ø 42 x 110 mm -Design: B3 -Dimensions: 590/420/H335mm -Weight: 120 kg

Condition: used, Electric motor, three-phase motor -Power: 3.7 kW -Speed: 1430 rpm Cjdpfx Anjd A Ex Ujwogt -Shaft: Ø 32 x 50 mm -Construction: B3 -Dimensions: 400/295/H350 mm -Weight: 85 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package Cgsdpfx Anjt U Tq Njwot -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 600 x 140 mm -Weight: 13.2 kg

Condition: used, Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: Telemecanique, crane remote control with cable / portable crane control panel Cgedpjkrgifsfx Anwet -Cable length: 23m -Connector: 16 pin -Dimensions: 600/400/H340 mm -Weight: 13 kg

Condition: used, Ventilation valve, relief valve -Manufacturer: BEV, ventilation valve for water -Type: M16072 PN16 DN 050 -Bolt circle: Ø 125 x 17 mm Cgedpst E D Ndefx Anwst -Dimensions: 165/162/H295mm -Weight: 13 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Cgedpolu N Elsfx Anwst -Manufacturer: Erge, heating tape, heating sleeve -Type: Ø125 x 95 mm -Item No.: 827 565 65 -Heating power: 1600 W -Voltage: 220 V -Dimensions: 190/150/H95 mm -Weight: 1.1 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch, welding robot hose package, intermediate hose package Cgsdpfst U Trgox Anwjt -MIG/MAG hose package: Intermediate hose package for welding robots -Length: 6.0 m -Connector: 16-pin -water cooled -Transport dimensions: Ø 600 x 130 mm -Weight: 10,9 kg

Condition: used, Electric motor, three-phase motor -Motor: unused -Power: 18 kW -Speed: 2920 rpm -Shaft: Ø 42 mm Csdpfx Ajcuta Uenwjgt -Construction: B35 -Protection class: IP 55 -Dimensions: 640/390/H360 mm -Weight: 110 kg

Condition: used, Three-phase motor, electric motor -Motor: is unused -Power: 15 kW Cgsdpfx Anecwuv Uowjt -Speed: 2930 rpm -Shaft: Ø 42 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 650/400/H350 mm -Weight: 98 kg

Condition: used, Socket distributors, site power distributors, connection cabinet -Equipment -Circuit breaker -Main fuse -1x socket: 16 A -1x socket: 32 A -Schuko: 3 Codpfx Ajc Sml Dsnwogt -Dimensions: 270/280/H340 mm -Weight: 8 kg

Condition: used, Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder, -Manufacturer: RUCKH -Type: Pitch GM 160M-4 Codpfx Anofgi Nnswogt -SAP no.: 48587 -Power: 7.5 kW -Max. Speed: 1600 rpm -Voltage: 288 V -Brake: was removed -Fan: -Construction: B5 -Tachometer: -Shaft: toothed Ø 42 x 50 mm -Dimensions: 870/380/H575 mm -Weight 155 kg

Condition: used, Safety switch, safety interlock Csdpfx Anodnffpowegt -Type: AZM 161SK-12/12RK-024 -Protection class: IP 67 -Locking force maximum: 200 kg -Volt: 230 V. -Number: 14x available -Price: per piece -Dimensions: 130/90/H30 mm -Weight: 0.4 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders, lifting cylinders, Short-stroke heavy-duty cylinder -Manufacturer: Tirre, hydraulic cylinder double-acting stroke 25 mm -Type designation: 160.90.25.10541 Cgedpfog Aka Hex Anwst -Piston rod: Ø 90 mm -Cylinder: outside Ø 185 mm -Dimensions: 300/225 / H225 mm -Weight: 50kg

Condition: used, Safety switch, safety switch, TZ -Type: AZM 161CC-12/12rka-024 Cjdjb N E Hcspfx Anwsgt -24VAC/DC IP67 -Number: 6x available -Price: per piece -Weight per package: 0.5 kg

Condition: used, Servo motor, electric motor, DC motor, pitch motor, pitch drive, rotary encoder, tachometer, encoder -Manufacturer: RUCKH -Type: Pitch GM 160M-4/SSB -SAP No .: 56418 -Power: 7.5 kW -Max. Speed: 1600 rpm -Voltage: 288 V -with brake/fan/encoder Codpsfitfhefx Anwegt -Construction: B5 -Shaft: Ø 42 x 50 mm -Dimensions: 870/370/H555 mm -Weight: 171 kg

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, workpiece weight (max.): 170 kg, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 220 mm, clamping length: 1,600 mm, Workpiece Clamping Diameter : ø 3 – 220 mm (Optional ø 310 mm) Workpiece Diameter: ø 3 – 400 mm Workpiece Length : 20 – 1.600 mm Centre Hole Diameter : ø 1 – 60 (Optional 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Csdpeym At Ssfx Anwsgt Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Condition: new, empty load weight: 765 kg, maximum load weight: 835 kg, overall weight: 1,600 kg, axle configuration: 2 axles, loading space length: 3,180 mm, loading space width: 1,400 mm, loading space height: 2,300 mm, loading space volume: 10.3 m³, color: grey, construction height: 2,700 mm, working width: 1,840 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Number of animals: 1 + foal - Permissible total weight: 1,600 kg - Unladen weight: 765 kg - Payload: 835 kg - Interior dimensions: 318 x 140 x 230 cm (L x W x H) - Overall exterior dimensions: 452 x 184 x 270 cm (L x W x H) - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100 km/h: included! - incl. vehicle documents Vehicle body: - Floor: ALUMINIUM floor - Side walls/body: Anodized double-walled aluminium - Roof material: Full polyester - Tack room: No - Tack room equipment: -- - Feed troughs: optional - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 102 to 122cm, adjustable - Distance between stall bars: 162 to 182cm, adjustable - Distance between tack room and breast bar: -- - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: Yes, front left in direction of travel - Overrun device & brake: KNOTT - Plug lighting: 13-pin Standard equipment: - Pullmann2 chassis independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tethering option outside - Tethering option inside - Padded safety stall bar system - Continuous stall bars with plastic protection - Height adjustment for stall bars - Depth adjustment for stall bars - Panic release at front - Single wheel mudguards, plastic (black) - Lockable entrance door - Door retainer on entrance door - Windows on sides and in entrance door openable - Door lockable - Door lock on entrance door - Door lock on side and in entrance door openable, side and in entrance door can be slid open - Rubber glued and sealed to floor - Hay net hooks - Maneuvering handle - Side pads (2 pieces) - Step protection on side walls (GRP plastic) - Lifting device gas pressure shock absorber on tailgate - Step on rear flap - Tarpaulin roller blind as net - Lighting system with reversing light - Plug 13-pin Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Spare wheel with holder - Spare wheel cover - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Additional angle lever lock on door - Additional interior light at rear - Folding foal grille - Feed trough for hanging with holder - Full-length, padded (rear) box bar with add. Box bar continuous, padded (front) with additional holders - Wear mat - Video surveillance system incl. reversing camera - Aluminum head partition on PVC partition - Grid head partition on PVC partition - Various decors New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Cgedpou Hrqtefx Anwot

Condition: excellent (used), Year of production: 2007r. Maximum range: 1885 mm Cgodpfstu T D Hjx Anwjt Control: R-30iA Lifting capacity: 10 kg AXLES: 6

Condition: good (used), Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer diameter: 180 mm -Quantity: 2 cutters -Bore: Ø 35 mm -Price: complete Cgodpfsb A Sq Dsx Anwot -Weight: 9.5 kg

Condition: used, Year of construction: 1995, functionality: fully functional, - CNC Milling Machine Fadal, Model VMC 15XT A CNC vertical machining center by Fadal, model VMC 15XT. Here are some key specifications and features: Manufacturer/Model: Fadal VMC 15XT. Travels (typical for VMC 15XT): approx. (762 × 406 × 508) mm (X/Y/Z). Equipment: Features an automatic tool changer and a spindle designed for precision machining. Origin: The machine was manufactured in the USA. - NDM-40 with Siemens SINUMERIK System 6 This machine comes from an industrial environment and is of robust construction. It is equipped with an enclosed work cabin and a tool turret. Ideally suited for metalworking, workshops, training centers, or as a reliable production machine. Features: CNC Control: Siemens SINUMERIK System 6. Tool turret. Enclosed cabin. Emergency stop and full operator panel. Industrial-grade design. Optical condition consistent with age (signs of use present, see photos). - CNC Lathe NDM-25 Technical Data & Features of the Georg Fischer NDM 25 The NDM 25 was designed as a robust machine for precision manufacturing, including applications in the automotive and aerospace industries. Manufacturer: Georg Fischer (+GF+). Machine type: CNC lathe. Control unit: Most commonly equipped with Siemens 820 T control, but other older units such as General Electric or Kongsberg have also been installed or retrofitted. Axes: 2 axes. Cgodpfeyl I Tuex Anwet Turning length: 600 mm. Swing over bed: 400 mm. Turret: 12 positions. Chuck capacity: 250 mm. Equipment: Typically features a tailstock and a chip conveyor. Availability and Maintenance. - CNC Lathe NDM-16 The NDM 16 is a CNC lathe manufactured by the Swiss company Georg Fischer (+GF+) and typically equipped with Siemens controls. Technical Details The Georg Fischer NDM 16 is designed for shaft machining and is frequently used in industrial metalworking environments. Machine type: CNC lathe / turning center Manufacturer: Georg Fischer (+GF+), Switzerland Control: Various CNC controls have been used, including Siemens 840 C or older models such as General Electric Mark Century 1050 HL or Siemens Sinumerik 5 TS. Capacity: Turning diameter up to 250 mm and turning length up to 800 mm, depending on specific machine configuration. RhyMech AG lists specific capacities of 450 mm diameter and 500 mm length (170 x 500). Power: Rated at around 22 kW (30 HP). Tool system: Fitted with a 12-position VDI tool disc. The NDM 16 was produced in the 1990s and is now primarily found on the used machinery market. There are also other machines with similar nomenclature, such as the SCHIESS PENSOTTI NDM 160 vertical lathe, which is, however, a different type of machine. - EXCEL-810 CNC Vertical Machining Center "CNC" stands for Computerized Numerical Control, meaning the machine is computer-controlled. "Vertical" refers to the spindle orientation, which in this case is vertical. These machines are widely used in manufacturing and mechanical engineering for producing complex parts. Fully functional and equipped with a range of different tools. Various tools are also available (see pictures).

Condition: used, mileage: 44,110 km, power: 302 kW (410.61 HP), first registration: 04/2021, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 6,100 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,450 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, traction control, = Further Options and Accessories = - Remote-controlled central locking - Refrigerator - Air suspension - PTO (Power Take-Off) - Radio - Rear-view camera - Disc brakes - Sun visor - Toolbox - Central lubrication system = Notes = Superstructure: Faun VarioPress V19b 516 /16 m3. Container washing system for underground containers from 0.8 m3 - 5 m3. Fresh water tank: 300 L with heating unit. Waste water tank: 1500 L. 2 high-pressure hose reels, 15 m hose each. HMF 2310 4 x hydraulic sliding section. Scanreco remote control. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Steering; Tire tread left: 80%; Tire tread right: 80%; Suspension: leaf suspension Rear axle 1: Tire size: 385/55R22.5; Steering; Tire tread left: 60%; Tire tread right: 60%; Suspension: air suspension Rear axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread left inside: 50%; Tire tread left outside: 50%; Tire tread right inside: 50%; Tire tread right outside: 50%; Suspension: air suspension Rear axle 3: Tire size: 385/55R22.5; Steering; Tire tread left: 75%; Tire tread right: 75%; Suspension: air suspension Weights Unladen weight: 23,796 kg Payload: 12,204 kg GVW: 36,000 kg Functional Crane: HMF Cgsdpjw Hcayofx Anwet Financial Information Price: On request Identification Type number: CF 410 8X2/6 FAUN / BEKKER LAGRA = Company Information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide correct information, but no rights can be derived from the published texts.

Condition: good (used), Small injector for injecting brine or marinades into chicken, fish, steak etc. Codpfexxd Hvjx Anwjgt

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 210 mm -Number: 2 milling cutters Price: complete Cgjdpfeb A Sq Iex Anwjt -Weight: 8.5 kg