Used Inserters for sale (1,775)

Condition: new, Parts to the insreter Pitney Bowes APS (full list on rquest): Y180623 Main Drive Pulley Buffer Drive - pcs 2 Y400656 PULLEY-TIMING-3MM-GT-48T HEI 50K Sheet Feeder pcs 4 Y403978 ASSY PULLEY - WIDE IDLER HPI Right Angle Transfer (RAT) pcs 11 Y404011 STL PULLEY-DR SHAFT ASSY (5 pcs PULLEY + 1 pcs SHAFT) HPI Right Angle Transfer (RAT) set 1 Y404010 STEEL PULLEY - OUTBOARD HPI Right Angle Transfer (RAT) pcs 4 Y437079 Pulley Motor Buffer Motor Drive pcs 2 Y637000 PULLEY-FEED DRIVE Engine - Lower pcs 1 Y637006 PULLEY DRIVE OVERHEAD PUSHERS Engine - Pushers pcs 3 Y637215 PULLEY-DRIVE OVERHEAD PUSHERS Engine - Pushers pcs 4 Pgodoicavvjpfx Akcok Y637216 PULLEY, MOTOR Engine - Pushers pcs 3 Y680031 PULLY-HTD 42T/28T Engine - Swing Frame pcs 3 Y684051 PULLEY-TIMING 3MM HTD 32T Engine - Swing Frame pcs 3 Y684052 PULLEY-TIMINg-3MM HTD 31T Engine - Swing Frame pcs 3 Y684059 PULLEY-3MM 30 T HTD Engine - Swing Frame pcs 6 Y684114 VACUUM PULLEY, TENSION (2 pcs PULLEY + 1 pcs SHAFT) Engine - Vacuum Deck set 1

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 50300315, product height (max.): 15 mm, product width (max.): 305 mm, product length (max.): 210 mm, paper weight (min.): 50 g/m², paper weight (max.): 200 g/m², TECHNICAL DETAILS Insert Length: min. 100 mm – max. 210 mm Width: min. 150 mm – max. 305 mm Weight: min. 50 g/m² – max. 200 g/m² Product height: max. 15 mm Pgodpfx Aexdii Hjkcek Envelope Length: min. 105 mm – max. 230 mm Width: min. 162 mm – max. 341 mm Flap width: min. 25 mm – max. 70 mm Speed: max. 15,000 envelopes/h MACHINE DETAILS Printed labels: 798,538 pcs Note: The machine will be available from 02.12.2025!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, product height (max.): 60 mm, product height (min.): 12 mm, product length (max.): 3,200 mm, product length (min.): 240 mm, product width (max.): 800 mm, product width (min.): 140 mm, TECHNICAL DETAILS Components: ESSE2 cross-loader: automatic BIESSE FTT: with 4 heads, drilling and milling, automatic tool change Tilter: available BIESSE FTT: with 2 heads, drilling and milling, automatic tool change BIESSE FHT: horizontal drilling and dowel insertion ESSE2 cross-unloader: automatic Panel dimensions Panel length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Panel width: 140 - 800 mm Pgodpfx Aswmcxiekcsk Panel thickness: 12 - 60 mm Drilling units FTT 1 drilling heads: 4 FTT 2 drilling heads: 2 Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Turret cartridges: 2 Positions per cartridge: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B Milling spindles Electric spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-station tool change rack Electric spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-station tool change rack Lateral positioning units Workstations: 2 for parallel machining of identical or mirror-image panels Left positioning element: fixed to the lateral reference Right positioning element: movable in the X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X-length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross-feed, single drive Unloading system: 1 belt conveyor with cross-feed, single drive Additional features: Cleaning fan in the unloading area Safety features Standards: CE-compliant Safety equipment: Extensive protective enclosures

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming Pjdpfx Asd Exwgskcsgk CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002. Pgsdpfxst N Rixs Akcek 2 pcs. CNC drilling heads from top. 1 pcs. Glue spraying head 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2018, I sell the multiple drilling machine with inserting Vitap Blitz Year: 2018 Number of drilling spindles 1 Number of inserting heads 1 Glue spraying with pump Programming Pedpjwg Tyqefx Akcsgk CNC-driven X-axis Very good condition. Available immediately

Year of construction: 1990, condition: defective spare-parts repository (used), I sell the dowel inserting machine Cerisola Savona. Vibrations magazine and inserting head designed for 8mm dowels. Inserting gun missing ! Podpogzlrbofx Akcegk Available immediately. 220V connection

Year of construction: 1993, condition: good (used), I sell the angular drilling machine with hinges inserting suitable for doors production MARZANI MACCHINE CHEAP WORK Year: 1993 Number of drilling spindles 1 (drilling head tiltable fully -7 up to +90°) Podehw Dfvjpfx Akcogk Number of inserting heads 1 (magazine suitable for door hinges) Inserting mechanically, screw system. Very good condition. Available immediately

Year of construction: 1997, condition: good (used), I sell the multiple drilling machine with inserting KOCH WinDoor Year: 1997 Number of drilling spindles 1 (suitable for dowels 8x60mm) Number of inserting heads 1 Motorical axes adjustment Pgsdpfx Aefyn Tyekcsk Workpc. length 200-3500mm Workpc. width 20-200mm Workpc. height 30-100mm Available immediately

Year of construction: 1990, condition: good (used), I sell the dowel inserting machine Cerisola Savona V3B. Vibrations magazine and inserting head designed for 8mm dowels. Available immediately. 220V connection Pgedpfx Aogzltnokcjk

Condition: excellent (used), Year of construction: 1999, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 1999. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 3 pcs. 3Master vibratori Vibration dowel inserting device. Pgedpfx Aket N Hmmocek Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KT2. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Grooving saw 2 pcs. SARG Vibration dowel inserting device. 1 pc. vacuum underpressure pump Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Pgedpfjt N Rkvjx Akcsk Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2001, I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001. 2 Stk. CNC drawers slidings inserting from top. 6 Stk. Glue spraying heads 1 Stk. Vibration accessories input device. Podpet N N Aqsfx Akcegk Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: used, Year of construction: 2006, functionality: fully functional, BARGSTEDT LOADER BARGSTEDT TURNER (front side/back side) WEEKE THROUGHFEED DRILLING PROFI LINE BHH 35 WEEKE THROUGHFEED DOWEL INSERT BST 100 BARGSTEDT UNLOADER Pjdpfx Akewrdg Ejcogk

Condition: used, Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) Pgsdpfxoxnrtce Akcjk 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Pgsdpew Nytnjfx Akcok Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Pgedpfevf E Avsx Akcjk Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg Pgodpjy Hxp Dofx Akcok dimensions of the machine ca. 1,4 x 0,7 x 1,2 m Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 06/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Psdpsy Hgfaefx Akcjgk Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 04/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Pedpfey Hgd Nox Akcsgk Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 55119214, This is a refrigerated countertop unit from the manufacturer NordCap, which is perfectly suited for insertion under existing cooking blocks or grills. The unit was manufactured by the premium manufacturer Ideal. The refrigerated countertop unit features a built-in stainless steel evaporator and is equipped with four full-extension drawers. The usable height is 90 mm per drawer. Two identical units are for sale. The unit has undergone a comprehensive inspection in our in-house workshop and is fully functional. The unit was only in use for six months and was stored until the end of operation. Used condition is very good. The RRP is €5,900 net. The stated price is net plus 19% VAT. Our used appliance service for you: •6-month warranty on all electrical parts •High-quality brand-name appliances at fair prices •Professional overhaul/inspection & expert cleaning •Tested & fully functional - or your money back •Shipping or pickup available •Expert advice - before and after purchase •Provision of operating instructions, wiring diagrams & spare parts •Tested according to DGUV V3 Technical specifications: •W x D x H: approx. 1380 x 660 x 410 mm •Power supply: V: 230 / kW: 0.265 •Serial number: 460923-80034645-001 •Year of manufacture: 2019 Condition: used, serviced, fully functional Shipping: •Delivery or self-collection by arrangement •Worldwide shipping on request •Shipping to islands or mountain resorts only by arrangement Psdpfxjvga Dqj Akcegk Do you have questions, require advice, or would like to view something in person? You can reach us by phone during our opening hours: Monday-Friday 9:00 AM - 1:00 PM and 2:00 PM - 5:00 PM.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Order picker with large front platform for transport trolleys Year of manufacture: 2021 Pedpfex Ed Rhox Akcjgk Platform height: 14 meters Picking height: 16 meters Front insertion for large roll cage trolley (trolley dimensions: length 2080 mm / width 1338 mm / loading height 520 mm) Ideal for operations handling large parcels, furniture, bicycles, etc. In stock: 4 units available / operating hours approx. 800 / 900 / 1500 / 1900 / battery 5 PzS775AH + charger

Condition: used, Year of construction: 1998, Used deduster Year of manufacture NE 250 W, right-side pneumatic filter regeneration Including suction nozzle d = 250 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW, 400 V / 50 Hz, on/off switch, potential-free contact for machine monitoring and automatic start/stop function, motor protection switch, airflow monitoring / differential pressure indicator, 3 mobile dust bins with inserted chip bags and clamping brackets, robust filter module made of galvanized sheet steel with automatic extinguishing system. Technical data: Maximum airflow: 5,050 – 5,600 m³/h Nominal airflow: 3,532 m³/h Corresponding negative pressure: 2,500 / 2,960 Pa Suction side connection: d = 250 mm Mode of operation: continuous duty Power supply: three-phase current Power consumption: 5.5 kW / 9.8 A Filter area: 25.2 m² Filter cleaning: automatic, pneumatic Total chip collection volume: 480 liters Chip bags (PE): 600 x 600 x 1,100 mm Weight: approx. 1,100 kg Noise level according to EN 23744: 72 dB(A) L x W x H: 3,350 x 1,020 x 2,290 mm Required connections: Compressed air standard coupling NW 7 approx. 6 bar, serviced and cleaned compressed air Pgsdpfsy Hmzhsx Akcsk Extinguishing water connection 1" at 3 bar 1 x 32 A CEE socket Due to varying extraction volumes and differing chip/dust contents, the uniform filling of the bins cannot be guaranteed in every operating situation with this system. Dedusters of this series are suitable for the extraction of wood dust and similar types of dust, whereby an H3 residual dust content of 0.1 mg/m³ is reliably maintained. Availability: by arrangement Location: Frankfurt

Condition: ready for operation (used), Year of construction: 1996, operating hours: 19,166 h, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,320 mm, total width: 1,250 mm, overall weight: 1,030 kg, number of axes: 3, This 3-axis AgieCharmilles Robofrom 20 die-sinking EDM machine was manufactured in 1996. It features a maximum electrode weight of 25 kg and a table size of 397 x 300 mm. The machine has an impressive axis travel of X=300 mm, Y=250 mm, and Z=250 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles Robofrom 20 machine we have for sale. Contact us for further details. • Machine bed material: Gray cast iron (Grauguss) • Max distance table to spindle: • 455 mm (standard) • 405 mm (Erowa ITS) • 387 mm (System 3R / Hirschmann) • 392 mm (Mecatool) • Max electrode weight: 25 kg (without changer) • Table size (W x D): 397 x 300 mm • Max workpiece weight: 200 kg • T-slots: 3 slots, 12 mm width, 100 mm spacing • Measurement resolution: 1 micrometer • Work tank useful dimensions (H x W x D): 345 x 740 x 520 mm Podoyu Sm Ropfx Akcjgk • Dielectric tank dimensions (H x W x D): 530 x 975 x 750 mm • Dielectric capacity: 200 liters (approx. 180 kg) • Filtration system: 3 paper filter inserts • Max machining current: 32 A (optional 64 A) • Input voltage: 3-phase 380/400/420 V, 50 Hz • Installed power: 3 kVA (5 kVA with 64 A option) • Compressed air: 6–8 bar • Cooling water flow: 6 liters/minute • Visual hours: 19,166

Condition: used, maximum load weight: 13,460 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,625 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 2,900 mm, Year of construction: 2013, Wagon No. G0123337_1 – Manufacturer: Krone. Pjdsy E Iacepfx Akcogk * Sliding roof curtain * Double corner fittings * Side/rear contour marking * Load certificate Code-XL * Beverage load certificate * Portal doors with double locking rods (internal) * Side sliding curtain * Forklift accessible * Telescopic support legs * Equipment for rail loading * Lashing options Load securing certificate VDI 2700 / Load securing for beverages. Delivery time: IMMEDIATE. Multi Lock outer frame. New tarpaulin. Steel insert slats with integrated combination lashing rail (slot/hole). Technically operational condition, no further repairs required. Partial repaint. Underframe with signs of use. UVV valid. LASI CODE XL!!! Multiple units available. Dimensions are approximate. Offer is subject to prior sale and is non-binding, prices net ex works D-59302 Oelde. Further details upon request by phone or email.