Used Agma Vmc168C for sale (22)

Condition: good (used), Stock number: 2225 Manufacturer: AGME Spain Type: RR14 Year of construction: 2005 Machine number: 3815 Control unit: CU 301 Table: 350 x 300 mm Riveting capacity max.: 14 mm diameter Stroke: 5 to 50 mm adjustable Distance table-head: 60 to 270 mm Air connection: 6 bar Riveting force: 1,880 daN Isdpfx Ajrhza Sjbgstf Riveting time: 0 to 5 sec adjustable Projection: 180 mm Equipment: 5-fold riveting head, two-hand operation; Connection: 1.6 kW Dimensions: 500 x 720 x 1,200 mm Weight: 0.3 t Condition: tested, ready for use

Year of construction: 2025, condition: new, Operates with 3 Phase 400V-50/60 Hz mains voltage and generators, tolerates voltage fluctuations up to 15%. Due to inverter technology, energy efficiency is higher than the conventional machines. Excellent welding characteristics with all types of solid and flux cored wires with CO2 or Mix gases. 4 Wheel Drive system, offers very powerful feedability for longer torches and offers less deformation on soft wires such as aluminum and flux cored wires. Welding voltage, wire feed speed (welding current) is adjusted from the panel in front of the wire feeder. Optimum welding parameters can be obtained from the printed table inside of the wire feed cabinet. Manual wire feeding & gas valve buttons, Trigger Mode (2/4), Spot mode are available on the wire feeder. Soft Start, Pre-gas, Post-gas, Crater Filling, Burn-Back, Flow Sensor settings are adjusted from the digital panel of the wire feeding system. ø300 mm, ø270 mm and ø200 mm spools and drums of any size can be used. 24V AC outlet for CO2 gas heater. Built in gas cylinder platform with large wheels to ease mobility in workshops. The Separate wire feeder standard harness length is 5 m and can be extended up to 30 m upon request (M-MW models). Protected against voltage fluctuations. Ijdpfx Ajyx Hpiobgstf Designed also for outdoor use, protection class is IP 23. Water cooling unit for water cooled torches provides powerful cooling even at very hot climates. (Water-cooled (W) models) Standard accessories come with the machine.

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Itjdpsh Eii Tefx Abgef Technical data and description: see pictures

Condition: used, Year of construction: 2020, Manufacturer : Hagmann Tec AG Model: MEDIMAT 711-45 Year : 2020 Type : Heat sealer / Sealing machine Maximum power : 8 kW Pressure : 6,0 - 8,0 bar Format : interchangeable sealing plate Sealing surface 550x350mm Sealing temperature up to 250°C Sealing force 10-70 kN Sealing time up to 9.9 seconds Itodpfx Abex R Dfrsgef Documentation available

Condition: ready for operation (used), functionality: fully functional, A good used take off conveyor in stainless steel fitted with modular belt suitable for use with bagmaker to take filled bags and elevate up to working height - this conveyor is in stainless steel and it was designed and built to accept a metal detector if required (see metal free zone) - complete unit on lockable swivel castors with brakes - three phase geared drive motor with gearbox - modular belt with flights Ready to ship worldwide Ask for more videos and pictures via Whats App Floor length - 2200mm Belt width - 300mm Iedpswucfrofx Abgstf Infeed height to top of belt - 180mm Outfeed height - 1050mm

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, working width: 2,400 mm, working height: 32 mm, working length: 800 mm, TECHNICAL DETAILS Working width X-axis: 267 - 2,400 mm Working length Y-axis: 120 - 800 mm Iodpfx Absydn A Tsgotf Working height Z-axis: 16 - 32 mm 2 upper drilling heads + independent Y-axis grooving consisting of: Left head with 15 vertical spindles in X and Y-axis + one blade for grooving Right head with 15 vertical spindles in X and Y-axis + one automatic hinge installation unit 2 independent lower vertical drilling heads in Y-axis each with 5 + 5 independent spindles MACHINE DETAILS Control: Numerical control with WoodWop software EQUIPMENT Automatic loading system with motorized roller conveyor Tank with vibrator for hinge storage and automatic feeding Unloading system with automatic roller conveyor

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 6860 0007, Please let us know your quote. Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carrier Machine specifications: 5-axis grinding center including oval feed belt and loading gantry 12-station tool changer with HSK 63 Max. X-axis travel: 500 mm Max. Y-axis travel: 650 mm Itjdpfxovbgiie Abgef Max. Z-axis travel: 650 mm Table size: 500 x 650 mm Cut-off detection Nordmann dressing spindle Oil supply via central factory supply

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 201805015, functionality: fully functional, pressing force: 185 t, table length: 4,100 mm, total length: 3,560 mm, total width: 1,550 mm, total height: 2,850 mm, overall weight: 18,000 kg, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, installation height: 500 mm, space requirement height: 3,440 mm, working length: 4,100 mm, Lightly used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic supports ESA 660W CNC LAG press brakes represent the perfect combination of Italian technological innovation, meticulous attention to detail and design, and the substantial production capabilities of China. These strengths, combined with the highest quality European components, allow LAG to offer its customers press brakes, shears, and inserting machines with the best price-to-performance ratio on the market. This is the top-of-the-line model, equipped with accessories and automation for highly profitable performance. Main standard configuration of the G-TOP press brake: Iedpfx Abjwync Hegotf - G-FLEX crowning compensation system - G-CS active crowning system - 6 axes (Y1-Y2-X-R-Z1-Z2) - Dual pump system: one main power pump and one pump dedicated to the crowning system - DSP AP safety system - Touchscreen control panel on the electrical cabinet - Sliding front supports - Touchscreen CNC control - Reference 4-axis rear backgauge system, model GRP-4 (X-R-Z1-Z2)

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING OLIVE POMACE DRYING FULL AUTOMATION WITH VARIABLE SPEED MOTORS STAINLESS STEEL FEEDING AUGERS CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS Itodpfx Abew Hgbhjgsf FOR DETAILED INFORMATION, PLEASE CONTACT US

Condition: used, mileage: 202,081 km, power: 130 kW (176.75 HP), first registration: 11/2013, fuel type: diesel, empty load weight: 6,630 kg, maximum load weight: 5,870 kg, overall weight: 12,500 kg, axle configuration: 4x4, wheelbase: 3,050 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 2,400 mm, loading space width: 2,050 mm, loading space height: 400 mm, Year of construction: 2013, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, fog lights, front power take-off, immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * 1 owner from new * Ex-municipal ownership * Condition, see pictures * 4x4 all-wheel drive * Dual steering (VarioPilot) * Mulag MKM 700 telescopic and front boom Isdpfx Absw Sx S Iogjtf * Reach of front boom: 6.7 m (7.2 m*). Verge mower: 3.0 m * Side shift: 850 mm (1300 mm*) * The boom geometry of the MKM 700 front combination, with a large ground clearance of approx. 2.90 m, enables efficient operation over small obstacles such as road signs * Mulag RMK 1200 verge mowing head * Working width: 1,200 mm * Ideally suited for work under guardrails thanks to low-profile design – automatic ground tracking * Mulag HDG high-pressure blower * Mounted in the Unimog attachment brackets, the HDG allows for efficient cleaning of the roadway. Debris is effectively blown to the roadside or shoulder. * Hydraulic torsion frame * Unimog front axle lock to prevent vehicle twisting (one-sided compression) during mowing operation, activated via a rocker switch in the cab. * Mulag counterweight 1,050 kg * Hydraulic adjustable municipal mounting plate * Front PTO * Front and rear hydraulics * Right-side mowing door * 3-way tipper body * Body dimensions: L=2,400 x W=2,050 x H=400 mm * Drop-side body, removable * Steel floor * Aluminum drop sides * DIN lashing eyes * Trailer hitch * Total train weight: 40,000 kg * Air conditioning * EasyDrive (hydrostatic drive) * VarioPilot dual steering * EPS gearbox with clutch pedal * Engine brake * Joystick operation * Driver and passenger seats air-sprung with seat heating * Rear view camera * Electrically heated mirrors * Beacon lights * ABS and ASR * Winter service lighting * Front and rear window heating * Radio * Raised exhaust system * CB radio * Leaf suspension * Gross vehicle weight (GVW): 12,500 kg * Unladen weight: 6,630 kg * Payload: 5,130 kg * For sales to commercial customers and export (non-EU and EU), German commercial law applies. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV certificate, DGUV, SP or UVV tests. You can find additional trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and examination of the goods to avoid misunderstandings regarding condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently confirm the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Condition: excellent (used), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, FPT PRAGMA M 60 CNC SELCA 4045 Automatic continuous head, 5000 rpm 2.5° automatic head with electrospindle 18 kW – 18,000 rpm Stolle table 7000 x 2000 x H 300 Itodpfx Aoyycibobgof

Condition: used, Year of construction: 2005, We offer this used Obscure Maxima collating machine 50x80, year of manufacture 2005. Itjdeyq Rtuopfx Abgsf Sheet size: 50×80 cm Number of stations: 17 Serial number: 2120547 Rated current: 23 A Frequency: 50 Hz Voltage: 380 V If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, mount diameter: 10 mm, spindle speed (min.): 6,000 rpm, spindle speed (max.): 12,000 rpm, table length: 1,130 mm, table width: 250 mm, – Italian production TECHNICAL SPECIFICATIONS: - Number of spindles: 8 - Number of units: 4 - Unit motor power: 4 x 1 kW - Adjustable angle of end units: 0° - 20° - Mechanical oscillation - Oscillation motor power: 0.37 kW - Max. oscillation length: 100 mm - Oscillation speed adjustment - Independent unit oscillation - Basket diameter: 10 mm - Distance between outermost spindles: 1170 mm - Min. distance between units: 84 mm - Spindle speed: 6000 / 12000 RPM - Unit height adjustment - Unit width adjustment - Table dimensions: 1130 mm x 250 mm - Table height and depth adjustment - Three pneumatic clamps - Inverter power: 4 kW - Connector diameter: 2 x 100 mm - Machine dimensions (L/W/H): 235 / 165 / 200 cm Itodpfx Aox Npimebgef - Weight: ~ 1750 kg

Condition: refurbished (used), Year of construction: 2005, We have a Buhrs ITM CS400 servo gathreing section available. Is your current machine to short? With this gathering section you will get 6 stations extra directly. Iodpoq T Nvcsfx Abgetf Year of built 2005 but not used that often. We do selll this gahering section after complete maintenance and with maintained feeder. You have the choice between rotary and fiction feeders which you can place on the base.

Year of construction: 2002, condition: good (used), machine/vehicle number: RHKBK125KG, DEMAG KBK crane sky crane runway dimensions approx. 6x5m Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK2-L rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drags, holders/suspenders etc. Itjdporft Nlsfx Abgof including Demag DK 125KG Manulift one-hand chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please request your crane runway with load capacity and dimensions without obligation.

Condition: used, mileage: 1 km, power: 1 kW (1.36 HP), first registration: 05/2002, empty load weight: 2,340 kg, maximum load weight: 7,660 kg, overall weight: 10,000 kg, axle configuration: 4x2, brakes: other, driver cabin: other, gearing type: other, emission class: euro6, number of seats: 1, Year of construction: 2002, Equipment: cabin, * Mulag Mähtronic MHU 800 * Rear boom with 6m extension * For mounting various municipal equipment * Swivel up to 2.50 m Ijdpfx Aboxawylogjtf * Swivel range 90° to the rear * Including joystick control Original Mulag * 6 hydraulic control circuits * Suitable for all Unimog and all municipal vehicles * Unladen weight: 2,340 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), functionality: fully functional, Holweg RS2 flat & satchel paper bag machine with 2 colour in line flexo print Itedpfx Asru Hftobgsf Bag width: 70-380mm Bag lenght: 160-680mm Machine can make paper bags with window. Video of machine in operation available if required. Also available: - Holweg RS2 with 3 colours, - Windmöller & Hölscher Matador 50, - Fischer & Krecke Maxima 26.

Condition: used, Year of construction: 1998, machine/vehicle number: 35705, Zusammentragmaschine Serial-No. 35705 Itedpfx Astzc Siebgof Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Zusammentragmaschine / Collator Machine TMF N10 Serial-No. 01450 10 Stationen Zusammentragmaschine A3 - 5 Stationen Zusammentragmaschine A2 10 Stations Collating Machine Size A3 - 5 Stations Collating Machine Size A2 Mit einem angebundenen Rüttler zig/zag / Delivery Jogger with an online zig/zag unit Panel Operation and Controls, Isdpfx Aov Anqkjbgjtf Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Pre-set counter - Full receiving Tray Handbücher / Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Zusammentragmaschine / Collator Machine Horizon VAC 100a Year 2008 - Serial-No. 412063 10 Stationen Zusammentragmaschine 10 Stations Collating Machine Itedjv Hruuepfx Abgjf Format / Size min. 120 x 148mm - max. 350 x 500mm Papiergrammatur / Paper weight 40-250g/sqm Ladekapazität / Loading capacity 55mm each Station Panel Operation and Controls Stau / Jamming Doppelbogen- und Fehlbogenkontrolle / double-sheet and no-sheet control Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1994, Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC  The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a three-stage compression configuration, which progressively increases air pressure. Additionally, each stage features combined aluminum and cast iron diffusers, while a cooling system with intercoolers at each stage and a final aftercooler enhances operational efficiency. Moreover, onboard instrumentation includes temperature and pressure transducers, ensuring continuous performance monitoring. Technical Data and Performance The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar operates with an absolute intake pressure of 99.3 kPa, whereas its discharge pressure reaches 8.23 bar absolute. It delivers an air supply capacity of 2190 m³/h, making it highly suitable for large-scale industrial applications. Its three-phase asynchronous squirrel cage motor runs within a voltage range of 380 to 415V, at 50 Hz, providing a nominal power of 680 kW and a rotational speed of 2970 RPM. Similarly, the motor features an IP23 protection rating and Class F insulation, allowing a maximum operating temperature of 100°C. Given these specifications, a star/delta starting configuration limits the number of starts to three when cold and two when hot per hour, thereby preventing excessive thermal and mechanical stress. Structure and Components Itedpfxoxcwx He Abgjf A vertically split cast iron casing enhances the machine’s robustness, facilitating easy maintenance and quick access to internal components. In particular, the Bull-Gear, constructed from AGMA 12-grade helical steel, operates with oil-lubricated hydrodynamic sleeve bearings, ensuring reliability and longevity. Furthermore, the 17-4PH stainless steel impellers feature a semi-open design with backward-leaning blades to maximize aerodynamic efficiency. In the same way, aluminum and cast iron diffusers aid in pressure recovery and maintain operational stability. The lubrication system integrates an oil reservoir coated with epoxy for corrosion resistance. Additionally, a 0.75 kW pre/post lubrication pump, operating at 380/415V, maintains continuous oil circulation, protecting moving components.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, measuring range X-axis: 230 mm, measuring range Y-axis: 230 mm, measuring range Z-axis: 550 mm, workpiece weight (max.): 300 kg, empty load weight: 2,550 kg, TECHNICAL DETAILS Workpiece Data: Module range: min. 0.3 mm – max. 20 mm (0.1 – 20 mm) Helix / lead angle: min. 0° – max. 90° Inspection diameter for gears between centers: max. 400 mm Workpiece diameter: max. 490 mm Vertical measuring range (Z-axis): 550 mm (700 mm) Horizontal measuring range / rolling path (X-axis): ± 115 mm Permissible mass moment of inertia: max. 5 kg·m² Permissible workpiece weight: max. 300 kg Center distance: min. 50 mm – max. 800 mm (50 – 1,000 mm) Chart Recording: Magnification: 50x / 100x / 200x / 500x / 1,000x / 2,000x / freely selectable Longitudinal magnification: 0.5x – 1x – 2x – 4x – 5x – 10x – 20x Machine Accuracy: VDI/VDE 2612 Part 1 and 2 as well as 2613 Group I At +18 °C to +22 °C, reference temperature 0.5 K/h; 2 K/d; 2 K/m MPEE₀ ISO 10360-2 (2010): 1.8 + L/450 mm VDI2631 Radial guideway deviation: 0.2 µm Roundness Ø100/L: 0.3 µm Flick 15W/U/L: 1.5 µm Flick 50W/U/L: 1.5 µm Straightness Ø70/L: 0.4 µm Coaxiality: 1.2 µm Total runout: 1.5 µm Machine Accuracy At +15 °C to +35 °C Reference temperature: 2 K/h; 12 K/d; 2 K/m MPEE₀ ISO 10360-2 (2010): 1.8 + L/250 mm VDI2631 Radial guideway deviation: 0.4 µm Roundness Ø100/L: 0.5 µm Flick 15W/U/L: 1.8 µm Flick 50W/U/L: 1.8 µm Straightness Ø70/L: 0.6 µm Coaxiality: 1.4 µm Total flatness runout: 1.8 µm Evaluation Software: Spur gears – external and internal helical gearing up to 60° Standards: DIN 3960 / 3962, free tolerances, AGMA 2015, ANSI B92.1, DIN 5480, ISO 1328:1995, JIS B1702:1998, JIS B1702:2016, GBT 10095:2008, ISO 1328:2013 Functions: Profile and flank line, tooth thickness variation, pitch and two-ball measurement, crowning, bevel, trapezoidal and bevel gear teeth Root and tip circle measurements, determination of tip and root diameter over up to six teeth or up to four teeth at three measuring heights or all teeth at one height on a special measuring sheet Gear Measurement Contact pattern measurement: 3 x profile and 3 x flank line Topography: 10 profiles x 10 flank lines (30 x 30 grid points) Measurement of all teeth on separate special measuring sheet Block gear measurement: up to 10 gearings Alignment measurement: up to 6 gearings and apex determination Storage formats: ASCII format, ASCII mka file, ASCII csv file (grid point deviation) Storage capacity: up to 5,000 workpiece measurement programs MACHINE DETAILS: Net weight incl. standard equipment: approx. 2,150 kg Net weight with active vibration isolation: approx. 2,550 kg EQUIPMENT - PC with software included (currently installed on machine) Isdpfx Abjxamnrjgstf - Measuring probe and extensions are included - 2x calibration spheres - Surface roughness standard - 2x 3-jaw chucks for various diameters - 1x measuring mandrel for aligning the upper and lower measuring tips - Stand for dial gauge - Driver fixture for a wider range of parts - Transport locks