Used Alfra Psg 5+ for sale (58,938)

Year of construction: 2015, condition: used, functionality: fully functional, The ALFRA PSG 5+ profile rail cutting device was manufactured in 2015 and is equipped with a hydraulic attachment. The length stop enables precise, repeatable cutting of profiles. An ALFRA 120 electro-hydraulic pump is connected to the hydraulic attachment and is included in the offer. The workbench is also part of the package. The device has been function-tested and has an electrical inspection performed by an electrical company. Nsdpsyyxp Rofx Akqsla

Condition: used, maximum load weight: 29,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2008, next inspection (TÜV): 04/2026, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, According to our “General and Stipulated Terms and Conditions” and without any guarantee or warranty, we can offer you the following vehicle—subject to prior sale, errors, and typographical mistakes—on a non-binding basis until conclusion of contract: Langendorf Inloader for Glass (Wagon 103) First registered: 24/06/2008 Type: SGL 5 Gross Vehicle Weight: 39,000 kg Unladen Weight: 9,500 kg Payload: 29,500 kg Overall Length: 13,600 mm Overall Width: 2,550 mm Overall Height: 4,000 mm Inner length: 9 m TÜV until 04/2026, SP until 10/2026 Side storage compartments Air suspension Emergency running gear for foldable wheel suspensions BPW disc brakes Tyres 385/65R22.5 – front approx. 60/60%, 2nd axle approx. 70/70%, 3rd axle approx. 80/80% Axle load: 9,000 kg each WABCO ABS Fixed front wall Nodpeyy Exxjfx Akqjla Curtain closure on driver’s side and passenger’s side (front) Fixed rear door 2 x drop supports Hydraulic supports inside Hydro push system Ferry lashings: 1 each on the left and right at the front frame, plus 1 each left and right rear lower frame Multiple side storage options Net price: €15,000.00 All information provided without guarantee or warranty. Our “General and Stipulated Terms and Conditions” apply. The place of jurisdiction for both parties up to a dispute value of €50,000.00 is the District Court of Ludwigslust; for disputes exceeding this value, the Regional Court of Schwerin is competent. Subject to error, typing mistakes, and prior sale.

Condition: good (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 230 mm, spindle speed (max.): 3,000 rpm, For sale is a surface grinding machine of the brand Okamoto, type PSG 52 UDX The machine is well-maintained and ready for immediate use Technical data: Year of manufacture: 1989 Grinding area: X-axis: 650 mm (manual) Z-axis: 230 mm Y-axis: 47 mm – 400 mm Max. height movement lower edge of new wheel (with ¯ 205 mm) min./max. - table) Nedownnbropfx Akqola Grinding wheel ¯: Maximum ¯ 225 mm. Speed range: 3000 rpm (stepless speed control) Table feed: 0.3 – 25 m/min (hydraulic in X-axis) Table area ground: 550 x 200 mm Magnetic chuck: 500 x 200 mm (standard size) (Load incl. magnet max. 200 kg) Transport and loading can be arranged on request, for an additional charge, Europe-wide. Prices plus VAT Viewing possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, visit our website

Condition: good (used), Knife holder, shear knife holder, scissor cutting holder, cutting knife holder, scissor slot holder, scissor knife holder -Manufacturer: Dienes, pneumatic cutting blade holder -Type: PSG -Part No.: 245AA50002001 Nsdpfxjxw Uubs Akqjla -Blade diameter: 130 mm / 5.118 inches -Dimensions: see photos -Number: 2x shear blade holders available -Price: per piece -Dimensions: 320/70/H145 mm -Weight: 4 kg/pc.

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 98 20 262, Technical data at a glance GEISS, Seßlach Type 2800 x 1400 Year of manufacture 1998 Control Siemens Sinumerik 840. Working area approx. 2,800 x 1,400 mm Axes: 5-axis machining (B and C axis in milling head) Power 43 kW Weight approx. 5,900 kg Power supply 400 V / 66 A / 50Hz Formerly a tandem version. Tandem version has been professionally deactivated. Fully functional. Machine can be inspected at any time. Dismantling and loading at buyer's own risk. Nledpoyim Szsfx Akqoa

Condition: used, Year of construction: 2004, functionality: fully functional, stroke length: 250 mm, total length: 6,500 mm, total width: 2,300 mm, total height: 3,200 mm, overall weight: 25,500 kg, controller manufacturer: DELEM, controller model: DA 66W, working width: 5,100 mm, bending force (max.): 250 t, distance between stands: 4,555 mm, control type: CNC control, degree of automation: automatic, back gauge adjustment: CNC-controlled, number of axes: 6, actuation type: hydraulic, Equipment: CE marking, emergency stop, european tool clamping system, finger protection, foot remote control, FEATURES: Axes: R – X – Y1 – Y2, Z1, Z2 Bending length: 5,100 mm Distance between uprights: 4,555 mm Force: 250 t Throat depth: 465 mm Ram stroke: 250 mm Distance table–ram: 450 mm Control unit: Delem Weight: 25,500 kg Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year of rebuild: 2021 STANDARD EQUIPMENT: CE compliant PROMECAN pneumatic clamping Self-centring lower table with pneumatic clamping Motorised backgauge 1,000 mm (“X” axis) Height adjustment on “R” axis 250 mm CNC DELEM DA 66W 4 motorised, adjustable fingers Z1, Z2 Bending penetration (“Y1, Y2” axes) Nedpjw S Hfcofx Akqela Low-voltage electric foot pedal operation Emergency stops Hydrodynamic anti-deflection table with hydraulic crowning Side guards Class IV safety laser.

Condition: used, diameter div. Nedpfx Ajww Nb Eekqela number 36x tool adaptor BT 40

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg Nodpfx Ajytdkxokqela ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed Nodpfx Akjyaq Tasqela - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Year of construction: 2000, condition: used, Punching machine Noble HM 35/350 BKE 200/5 Maximum pressure 35 T Nlsdpjg Dgyxofx Akqsa 5 mm sheet thickness at 40 kp/mm²

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, PT+PSG profiTEMP+24 Hot Runner Control Unit with 36 Control Zones For sale is a PT+ PSG hot runner control unit with 24 control zones, in perfect technical condition. The device has recently been fully checked, is running on the latest software version, and is immediately ready for operation. Technical details: 24 control zones 522 wiring – sensors and heaters separated Mains plug 63A Nljdpfx Ajyhcqmokqsa Software & electronics freshly checked Condition: used, but absolutely flawless Demo unit Original price €7,500

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ Nlodpfsy D R Iajx Akqoa We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2008, PROTH - PSGC-50150AHR - 2008 - x/y/z= 1560/450/600 mm - max. grinding length 1650 mm - max. grinding width 560 mm - max. workpiece height 522 mm - grinding spindle mounting horizontal - table dimensions 500x1500 mm - table load capacity 1880 kg - main electric motor power 11/15 kW Nledpoy Hf Hisfx Akqja - dimensions l x w x h 5700 x 3500 x 3000 mm - machine weight 7000 kg

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg Njdpfjqt Dmyex Akqola - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 1916180-002656, - Type: PSG ProfiTEMP+ 66 zones - Year of manufacture: 2019 - Serial number: 1916180-002656 Nedpfsy Ah Dvjx Akqela - Power supply: 230 VAC (3~ / N / PE) 50/60Hz - Power: max. 43kW, 3x63 A - Connections: XS3 RJ45, XS1 RS485 - Condition: Used only for test moulds - Brand: PSG Plastic Service GmbH - Extras: 8x cable with 24-pin plug & manuals

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Nlsdpfx Akovz U Ereqea Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: used, Year of construction: 2021, max. travel distances (transverse x longitudinal) 280 x 600 mm distance spindle /table 500 mm Grinding surface of table 250 x 500 mm Grinding Wheel Dimension 355 x 25 x 127 mm grinding wheel turning speeds 1.500 / 1.800 mm power requirement 2,2 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Nedpfxsxp R D Ns Akqsla Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: like new (used), Year of construction: 2023, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: IX-GN-4044-S, input voltage: 230 V, working width: 900 mm, total width: 1,000 mm, total length: 2,200 mm, total height: 1,100 mm, air pressure: 6 bar, control voltage: 230 V, ⚙️ Included: • Full conveyor systems • Integrated reject systems ( air reject ) • Stainless steel food-grade construction • Touchscreen control panels 2 off left hand - 3off right hand units , Full production capacity 60-70k per hour ✅ Condition: • Recently removed from production • Fully operational prior to removal • Clean, well-maintained units • Matching set (ideal for line integration or multi-site use) 💡 Ideal For: • Ready meal manufacturers • Meat / poultry processors • Bakery & snack producers • Food contract packers Detects Glass / Plastic / Wood any foreign bodies 📦 Sale Options: • Available individually or as a complete package • Priority given to bulk buyers 🌍 Additional Information: • Available for UK and international buyers • Assistance with loading and logistics can be arranged • Viewing can be organised by appointment 💰 Price: Can be discussed on appointment / via email / phone (Discount available for multi-unit purchase) 📩 Contact: Craig Conway Conways Engineering Ltd Nledpfx Ajyyl Aqskqoa Please get in touch for: • Additional photos • Full specifications • Video / demonstration • Bulk purchase enquiries Viewings Welcome for full demonstration

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Nedpfoyw Tupjx Akqola Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws One-piece hard internal jaws Key

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, shelf height: 5,000 mm, number of shelf rows: 6, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 13,700 mm, support length: 3,300 mm, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4), each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, compartment load capacity 3250 kg. - 30 frames (RM5011 - RAL5019) - 80 base plates, shimming material, bolt set - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 collision/ramp protection barriers (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: Nledjyz Ibfspfx Akqea - up to 20 working days after receipt of payment - free delivery to building site / assembly location - unloading from truck to be carried out by buyer using own lifting equipment - Deliveries are made to the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement only.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 43,500 mm, shelf height: 3,500 mm, number of shelf rows: 5, pallet spaces: 135 euro pallets, frame height: 3,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 8,500 mm, support length: 2,700 mm, 5 rows of pallet racks (5 x M35112711-2), each 8.5 m long, 3.5 m high, 1.1 m deep, with 3 bays per row, each 2.7 m wide, and 2 beam levels per bay, compartment load capacity 3,000 kg. - 20 frames (RM3511 - RAL5019) including base plates, shims, and mounting hardware - 80 floor anchors (ZZBA1210) - 60 single beams (T27114 - RAL2008) - 5 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: Nsdpfx Aeyzmkrskqjla - Maximum 20 working days after receipt of payment - Delivered free to the site / assembly location - Unloading from the truck is the responsibility of the buyer using their own lifting equipment. - Deliveries are made throughout the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries are possible by individual arrangement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, number of shelf rows: 10, shelf height: 5,000 mm, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site Nodpfx Aeyzl T Eskqjla - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: good (used), Year of construction: 2014, feed length X-axis: 1,000 mm, feed length Y-axis: 700 mm, feed length Z-axis: 180 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 180 mm, Selling FIVE working Datron M10 Pro due to relocation, with a 6th M10 Pro for SPARES/REPAIR. 1 x Datron M10 Pro 2018 3kw 40k HSKE25, 2 x 12 tools fixe axis capable linear scale option 1 x Datron 8 Cube 2015 3kw 40k HSKE25, 2 x 12 tools fixe axis capable 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools 1 x Datron M10 Pro 2014 3kw 40k HSKE25, 2 x 12 tools Nedpfx Akjywu Tyeqsla 1 x Datron M10 Pro 2014 Spares/Repair ONLY , no spindle, no XYZ servos, no computer. Available for immediate sale. The DATRON M10 Pro is a high-speed CNC milling machine designed for precision and versatility in industrial applications, particularly for the aerospace, medical technology, and electronics industries. Built with a solid granite table for vibration damping and thermal stability, it is engineered for high-speed cutting (HSC) of non-ferrous metals like aluminium, composites, and plastics with a 3.0 kW HF Spindle HSK-E 25.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, shelf height: 5,000 mm, number of shelf rows: 6, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 13,700 mm, support length: 3,300 mm, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4), each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, compartment load capacity 3250 kg. Nljdev Uq Dkepfx Akqja - 30 frames (RM5011 - RAL5019) - 80 base plates, shimming material, bolt set - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 collision/ramp protection barriers (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - up to 20 working days after receipt of payment - free delivery to building site / assembly location - unloading from truck to be carried out by buyer using own lifting equipment - Deliveries are made to the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement only.

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Column Lifting Rotating Device with 5-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Travel Modes Load Capacity 5000 kg, 360° Minimum Working Height: 700 mm Maximum Working Height: 1600 mm Speed: 0.5 rpm Clamping Plate Diameter: 700 mm Rotating Motion: 1.1 kW Nsdpfx Aowak U Eskqela 2 to 10-Ton Capacity Available Upon Request