Used Bacci Bacci Single Mortiser With 1 Tip for sale (82,646)

Condition: used, Bacci Double Mortiser with 1 Bit per Side Njdpjuqw Scjfx Akcjla

Condition: used, Bacci brand manual mortiser with 1 tip Nljdpfx Aoiv Damskcsa

Condition: used, Bacci 1-Point Oscillating Mortiser Nedewdfh Ujpfx Akcela

Condition: used, Year of construction: 2018, 2018 | MAN TGS 18.500 4x4H BLS with 2010 Kempf SKM 31/2 SR tipper semi-trailer | Used Tipper Truck | 349909 kms 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 42200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 33 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ Nsdpfx Aksyu Tqwjcjla 📌 Inspector's Comment: Good driving truck no further issues , PTO functions OK 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40504 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2015, 2015 | MAN TGX 18.480 4x2 BLS WITH TIPPER HYDRAULIC AND GOOD TIRES | Used Tractor Unit | 396459 kms Nedpfjyaik Dex Akcola 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 28 inspection points 28 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The MAN truck was in good condition at the time of the inspection, however, most of the tires need to be replaced. The rear left mudguard is torn off. Unfortunately, the trailer could not be detached, which limited the inspection of the truck. Tilting the driver's cabin was not possible due to the lack of tools, so an inspection of the engine could not be performed. The truck is equipped with a double-acting hydraulic system with two lines and an additional pump designed for a Walking Floor. The total height with the cabin spoiler mounted is 3.9 m. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31325 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): Nledeuzv Tzepfx Akcea rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, mileage: 407,000 km, power: 315 kW (428.28 HP), first registration: 01/2017, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, wheelbase: 6,400 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,350 mm, total width: 2,550 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, = Additional Options and Accessories = - Digital tachograph - Air suspension - Hub reduction - PTO (Power Take-Off) - Radio/CD player - Sun visor = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Axle Configuration Front axle 1: Tire size: 385/65 R 22.5; Steering; Tire tread left: 20%; Tire tread right: 20%; Suspension: leaf suspension Front axle 2: Tire size: 315/80 R 22.5; Twin tires; Tire tread left inner: 25%; Tire tread left outer: 25%; Tire tread right inner: 25%; Tire tread right outer: 25% Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Tire tread left inner: 15%; Tire tread left outer: 15%; Tire tread right inner: 15%; Tire tread right outer: 15% Rear axle 2: Tire size: 385/65 R 22.5; Steering; Tire tread left: 30%; Tire tread right: 30%; Suspension: air suspension Weights Nsdpfx Aeyibn Dekcjla Unladen weight: 19,161 kg Payload: 16,339 kg GVW: 35,500 kg Functional Crane: HMF Z 1943, mounted behind the cab Tipper: Side / Rear tipping Condition Damages: none

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Nedsx Hz Dqjpfx Akcela Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Including ramp

Year of construction: 2013, condition: like new (used), functionality: unexamined, machine/vehicle number: 130365 bis 130368, The heating units were acquired as part of a package in conjunction with a machine takeover from VW/Dieffenbacher and are not required. It is assumed they have very few operating hours (previously used in a laboratory setting). Nlsdox An Eqepfx Akcea

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well. Nlsdowf Anhjpfx Akcea

Condition: excellent (used), mileage: 128,632 km, power: 165 kW (224.34 HP), first registration: 06/1988, fuel type: diesel, tire size: 13R22,5, axle configuration: 4x4, fuel: diesel, color: orange, gearing type: mechanical, number of gears: 6, emission class: euro2, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 5,050 mm, loading space width: 2,500 mm, Year of construction: 1985, Equipment: crane, differential lock, seat heater, = Additional Options and Accessories = - All-wheel drive - Heated mirrors - Passenger bench seat - Leaf suspension - Comfort driver's seat - Differential lock - Differential lock - Speed limiter - Hydraulic system - Hub reduction - Radio/CD player - Sun visor - Toolbox - PTO (Power Take-Off) - PTO (Power Take-Off) = Remarks = PERFECT CONDITION MERCEDES-BENZ 1622AK (V6) 4x4 FULL STEEL SUSPENSION CHASSIS WITH HMF 1003K2 CRANE, MANUAL GEARBOX & REDUCTION AXLE!! 220HP, V6 ENGINE!! ZF6 GEARS MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLE!! P.T.O.!! SUN VISOR!! 3RD SEAT!! ETC.!! HMF 1003K2 CRANE MOUNTED ON REAR OF CHASSIS (2 HYDRAULIC EXTENSIONS)!! 4x STORAGE BOXES!! RACK FOR OVERSIZE LENGTH ABOVE CAB!! TRUCK IS IN CLEAN & GOOD WORKING AND DRIVING CONDITION, READY FOR (ELECTRICAL) JOBS!! MORE MERCEDES-BENZ 4x2 / 4x4 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! PLEASE CHECK OUR WEBSITE; SHIPMENT, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US, WE ARE A “ONE STOP SHOP” COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ENGEL TRUCKS; “YOUR GLOBAL TRADING PARTNER” = Further Information = Transmission Transmission: ZF 6-speed manual gearbox, 6 gears, manual transmission Axle configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle: Tire size: 13R22.5; Differential lock; Max. axle load: 7,500 kg; Steered; Tire tread left: 90%; Tire tread right: 90%; Reduction: single reduction Rear axle: Tire size: 445/65R22.5; Differential lock; Max. axle load: 11,500 kg; Tire tread left: 90%; Tire tread right: 90%; Reduction: outboard planetary axles Weights Unladen weight: 10,700 kg Payload: 8,300 kg Gross vehicle weight: 19,000 kg Functional Mast: Telescopic Lifting capacity: 10,000 kg Superstructure brand: HMF 1003K2 CRANE Condition Technical condition: very good Visual condition: very good Further information Nlsdpfeyrhgbex Akcja Please contact Sales Department or Erik Engel for further information.

Condition: used, Year of construction: 2013, operating hours: 10,349 h, 2013 | Volvo EC220DL with 1 excavator bucket | Used Tracked Excavator | 10349 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 47000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 65 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: BUCKETS NOT INCLUDED BUT AVAILABLE AT EXTRA COST. Good operating excavator for its hours, a little bit water is in the transfer case of the swing motor (water went trough the dipstick cover) but there is no major issue with this, and there is 1 tilting bucket that needs a new bucket knife and 1 earthmoving bucket with teeth that are available at extra charge. There is a little difference in travel speed between the two drive motors in fast travel mode (left driver motor is a little slower). Generally a nice machine! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40584 Equippo" is commonly used when looking up more details online. Nlsdpfx Aksyyww Hecoa 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2015, operating hours: 9,583 h, 2015 | Caterpillar 314E LCR with 1 excavator bucket | Used Tracked Excavator | 9583 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 51400 or Make an Offer. Njdpfx Akjyyp Tajcsla Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 56 approved ✅ 11 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: TILT BUCKET IS NOT INCLUDED. Good operating excavator, drivetrain a bit noisy, installed Cat product link system, camera and Oilquick quick coupler, 1 bucket , hydraulic oil level a bit low, good engine performance , autolube leaks a bit from hose, small play on swing drive as well as pins of the boom and the blade cylinders 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40585 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 2,500 mm, 1.1 Used Göpfert SRE Maxi 250 1.2 Brand: Göpfert 1.3 Model: SRE Maxi 250 1.4 Year: 2004 1.5 Country of origin: Germany 1.6 Z- tools (4) Tools for handholes, etc. 1.7 1 color flexo printing unit (2800mm width, 6 repeats) 1.8 Max. Sheet size: 2500x6500mm Nedpfx Aoyyuxuokcela 1.9 Max. Printing size 2500x2500mm 1.10 Min. Printing size 360x1000mm 1.11 Conveyer length 6000mm

Condition: used, This listing is for the PIPETMAN L P10mL 1-10mL Colour-code Light Blue The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability Nedpfx Asxv Dq Nokcsla

Condition: used, This listing is for a Pall Allegro 1/2" Single Use TFF System. The unit is in full working condition and is ready for immediate release. This Unit is fitted with a Ismatec Flowmaster FMT 300 peristaltic pump. This unit is supplied with Trolley and containers. The Pall Allegro 1/2" Single Use TFF System is a cutting-edge solution designed specifically for tangential flow filtration (TFF) in bioprocessing applications, combining innovative single-use technology with user-friendly design. Unlike traditional TFF systems, the Allegro system incorporates new concepts that enhance ease of use and efficiency, featuring a carefully considered layout that allows full access to components from one side. Key Features: Single-Use Design: Eliminates cross-contamination and cleaning requirements, enhancing system flexibility and ensuring a sterile environment. Integrated Sensors: Equipped with single-use sensors that track key process parameters, provide notifications for out-of-spec conditions, and enable automated control for optimal processing. Easy Setup: Comes with five pre-irradiated manifold sets (feed, retentate, permeate, bio container, recovery) that are ready for installation, typically taking just 20 minutes. Automated Operation: Fully automated for monitoring and controlling critical parameters, ensuring consistent performance throughout ultrafiltration and diafiltration processes. Technical Specifications: Capacity: Features a recirculation pump with a capacity of 1,000 L/hour, designed to accommodate 0.5 - 2.5 m² cassettes running at a crossflow of 5 L/min/m². Versatile Connections: Easily connects to Allegro 2D and 3D bio containers for WFI, diafiltration buffer, and process fluid in fed batch operations. Nlsdpfx Akjxxyfzjcja Temperature Control: Includes a heat exchange plate under the retentate bio container to manage product temperature, either cooling or heating as needed. Applications: Ideal for concentration and diafiltration of proteins, recombinant molecules, potent biological drugs, cytotoxic drugs, and vaccines, the Pall Allegro system stands out as a reliable and efficient choice for modern bioprocessing needs.

Condition: used, This listing is for the Gilson PIPETMAN P10 1-10uL Single Channel Pipette with Metal Ejector Colourcode Red The unit is in full working condition and is ready for immediate use The traditional “L” version: robust, bomb‑proof build, fully autoclavable stainless steel tip‑ejector, volume adjustable 1–10 µL. PVDF and stainless exterior, designed to be durable in tough lab setting Fully adjustable 1–10 µL range with fine decimal display Nedpfsxv Dt Djx Akcola Dual-position metal tip ejector supports D10 and DL10 tips Low pipetting resistance, especially in G-series (≈2 N force) PVDF body + stainless steel parts for chemic

Condition: used, Year of construction: 2006, functionality: fully functional, Murat Single Line 1 It consists of: KD658 - Four Head Welding Machine CK187 - Bufer Station CK172 - Automatic Turing Robot Njdpfx Akjykvgyscela CN772 - 4 Axes CNC Corner Cleaning Machine

Year of construction: 2006, condition: like new (used), Span approx. 8,6 m Total height/lifting height approx. 5,2/4,2 m Total hook path approx. 20,0 m Operating hours only approx. 88 Year of manufacture 2006 Nodjfd Rx Repfx Akcsla Crane equipped with: - STAHL monorail trolley of short design - Load display - Radio remote control

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Aseptic filler for drums Asepsystems with 2 heads 1" plug with homogenizer and sterilizer. Nsdpoq Rdhuofx Akcsla

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Nsdjyrihgjpfx Akcola Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Nodpfjyrnciex Akcjla Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Manufacturer: BACCI Model: EVO JET Type of machine: CNC Machining Center Year of manufacture: 2013 Nljdpfx Akoxw Nv Hscoa The EVOLUTION JET is an extremely flexible machining center, both in terms of adjustable dimensions and the number of worktables, onto which devices for manual, semi-automatic, or fully automatic loading and unloading can be installed. Ideal for simultaneous processing of all components required for assembling chairs or furniture on a single machine. Technical data: Fully digital NC axes: 12 Linearly interpolated axes: 3 + 3 or more Rotary interpolated axes: 2 + 2 Longitudinal axis (X): 3,400 mm or more Transverse axis (Y): 1,300 mm Head transverse axis (Y): 1,000 mm Vertical axis (Z): 750 mm A-axis: unlimited C-axis: +/- 180° 5-axis spindle CNC self-adjusting worktables Special material clamping system Rack gripper OSAI machine control Electrical cabinet cooling Independent Z-axes: 2 Number of milling spindles: 4 Maximum spindle speed (rpm): 24,000 Cantilever design 2 tables Belt feed loading External transport: roller conveyor Enclosed cabin CE marking

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Manufacturer: single, temperature controller Digitemp Q Nljdpfxoudqbie Akcoa -Type: TQD 3110 D -Measuring range: 0 to 399 °C -Dimensions box: 220/130/H135 mm -Weight: 0.8 kg

Condition: new, Year of construction: 2026, Size: 1 Nominal heat output: 45kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms from: 1.100 m³ (according to DIN) Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 12 - 15 kg/h Blower air capacity, free blowing: 3.250 m³/hour Nedpfedlgqpex Akcjla Blow-out opening: Ø 400 mm Flue pipe connection Ø 150 mm with flue gas blower Weight: 740 kg SPS control cabinet: 380 Volt