Used Bmf Spa for sale (1,869)

Condition: used, Year of construction: 2013, Chip conveyor, manufacturer BMF - BÜRENER, with filter system and high-pressure pump. Chip conveyor dimensions: Redpfsiicnkox Akxjt Neck width: 600 mm, neck height: 200 mm, conveyor length: 3000 mm.

Condition: used, Year of construction: 1986, length in total / mm Redpfxouddb Ae Akxst band width / mm conveying height / total power requirement / kW weight of the machine ca. / t required space / m Conveying height: 2610mm belt width: 240mm Conveying length: 6900mm

Condition: good (used), Year of construction: 2021, With patented MULTIFORCE end-lift system! The punching press automatically adjusts the cutting force to the size of the punching tool. It does not matter how resistant or thick the material to be cut is. Cutting table: 1,000 x 500 mm Arm reach: 370 mm Maximum cutting power: 25 t – 245 kN Dimensions: 1,000 x 1,140 x 1,710 mm Net weight (with oil): 1,020 kg Rjdpfx Ajy Inwyekxet

Condition: ready for operation (used), Year of construction: 2012, Offered is a horizontal flow wrap packaging machine (HFFS). Material types: heat-sealable films (BOPP, PET/PE, Alu/PE), cold-seal films, film width max.: 500mm, roll diameter max.: 350mm, core holder: 75mm, product dimensions X/Y/Z: 40mm-350mm/10mm-220mm/0mm-100mm, production output: 120-150bags/min. Viewing possible by appointment. Rjdpfxoy Ax Uls Akxet

Year of construction: 1966, condition: used, machine/vehicle number: 0126, Load capacity (estimated) approx.: 1.5 t Fork length: 1100 mm Fork width adjustable: 470 - 750 mm Lifting height max.: 1000 mm undercarriage: Redpfx Ajbn Da Iekxjt 2 castors on the support arms, 1 swivel castor under the lifting gear Hydraulic drive: 380 V, 1.1 kW

Condition: excellent (used), Band filter system with 40 bar pump and switchable filter for fine filtration Rsdpsyz Ikgsfx Akxet

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: M0616326, We are selling an extraction system including many associated ducts. The extraction unit is in good condition and has only seen limited use. Manufactured by Coral SPA, Italy, model PRN630, equipped with a powerful 37 kW motor. Suction duct diameter 600 mm: - 1970 mm, eight pieces - 1520 mm, one piece - 980 mm, two pieces - 500 mm, three pieces - 90° elbow, two pieces - 45° elbow, two pieces With branches: - 140 mm diameter, 500 mm length, one piece - 220 mm diameter, 500 mm length, one piece - 260 mm diameter, 500 mm length, two pieces Reducer from 600 mm to 450 mm, one piece Suction duct diameter 450 mm: - 1970 mm, three pieces - 990 mm, two pieces - 500 mm, one piece - 90° elbow, two pieces Suction duct diameter 350 mm: - 1979 mm, three pieces - 1500 mm, one piece Rjdpfx Asyx Dhcekxst Distributor, 500 mm x 250 mm, one piece - 500 mm length, 125 mm diameter, one piece 45° elbow, four pieces Reducer from 450 mm to 350 mm, one piece The extraction system can be inspected by appointment. Pickup or shipment by truck available.

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, machine/vehicle number: V04PL0099, System Ceramics – Automatic Tile Palletizing Machine (Refurbished) Manufacturer: System Ceramics S.p.A. Machine type: Automatic palletizing machine for ceramic tile packages Condition: Used – fully refurbished Status: In good working condition Automatic system designed for palletizing ceramic tiles, suitable for integration into ceramic production lines. Technical information: * Brand: System Ceramics Rodpfx Aksyy A Hgsxst * Category: Ceramic tile sorting / packaging equipment * Condition: Refurbished and tested * Functionality: Fully operational * Technical documentation * Availability: Immediate The machine has been professionally refurbished and maintained, ensuring reliability and reduced downtime. Optional services: * Machine inspection * Dismantling and loading * Worldwide shipping available Price: On request Location: Italy Contact us for further details, photos, videos and technical specifications.

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Rsdohwt H Aopfx Akxst Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: used, Bündelpresse / Bundle Press BMF SK 82 B Baujahr / Year 1968 - Serial-No. 0210 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Rjdpexp H Tyjfx Akxjt Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), functionality: fully functional, Horizontal hydraulic layer press Two-hand operation Electrical connection 400V/50Hz, 200kg Redpfx Aksxbgftexet

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total width: 1,112 mm, total height: 2,391 mm, total length: 1,237 mm, type of input current: three-phase, overall weight: 750 kg, workpiece weight (max.): 30 kg, input voltage: 400 V, space requirement width: 2,700 mm, space requirement length: 2,000 mm, power: 3 kW (4.08 HP), Equipment: cabin, documentation/manual, lighting, We are selling our mint condition BMF TWISTER blasting machine (demonstration model), built in 2025. The machine operates fully automatically and without compressed air. The workpieces rotate in a cloud of blasting media and are thus blasted on all sides. The desired settings (e.g. blasting time, speed of the blast wheel) are simply entered via a touch panel. The entries can be saved as recipes and reused later. No skilled personnel required. Quick workpiece change system, up to 100 workpieces per blasting cycle. Redoym T Ugspfx Akxjt Many commercially available blasting medias can be used, e.g. stainless steel, glass or ceramics. The system includes a suitable extraction system. Inspection and test blasting of customer parts are possible at our premises.

Condition: as good as new (ex-display), Year of construction: 2026, CMS agil tr Cutting table for Glas Rodpfopygwijx Akxet Max. workable Size: 3.810 x 2.600 mm Thickness: 2-19 mm Speed: 0-200 m/min Acceleration: 10 m/s² Options: - tilting table - Toolmagazin with 5 slots - Operatorpanel incl. Software

Year of construction: 2004, operating hours: 8,000 h, condition: repair required (used), functionality: not functional, machine/vehicle number: GLCI000199, Granite base measuring 900 mm x 1500 mm with a thickness of 250 mm, featuring a gantry structure and Z-arm equipped with a Renishaw PH10MQ probe head and Renishaw PHC10-2 probe head controller. All listed components are functional and can operate independently. Currently, the machine is non-operational due to the absence of the B3C controller, which processes data from the machine and transfers it to a PC. All axis scales and the probe head are fully operational. The equipment only requires a retrofit of the controller to become functional. Last calibration according to ENAC standards was in February 2019. (E = 1.9+3L/1000). Unused since 2020. Removal and transport are at the buyer's expense unless otherwise agreed and are not included in the sale price. Redpfx Aeyh H Dhjkxet

Condition: excellent (used), 5 Fixators Make BMF MK 30 Rodpoh Dm Eqjfx Akxot length 185 mm width 85 mm height 35 mm Weight per piece 2,4 kg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Manufactured in 2014, this equipment has been used only 50 times and was subsequently decommissioned. It is in near-mint condition (as good as new). Furnace technical data for MOBILE MUFFLE 80-65-140-AZ Useful load dimensions 800 x 650 x 1.400 mm Maximum operating temperature 999 Celsius degrees Maximum furnace temperature 1.000 Celsius degrees Regulation zones 3 thyristor control zones Rjdpfjyniz Eex Akxst Electrical voltage 3 x 400 V  50 Hz Installed electrical power 54 Kw Operating power consumption 30 Kw Nitrogen pressure (N2) 5 bar Nitrogen consumption for purging and safety 4-5 Nm3/h in the event of a power failure or for 10 minutes at start-up and shutdown Operating nitrogen consumption 3-3.5 Nm3/h during the cycle Water pressure Minimum 2 bar Operating water consumption 0.1-0.2 m3/h   at 20 Celsius degrees inlet temperature Furnace weight 5,3 Ton

Condition: used, Year of construction: 2022, liter capacity 980 l Pressure of pump 8 / 80 bar control Schütze / Contactors total power requirement 16,7 kVA weight of the machine ca. 1,1 t dimensions of the machine ca. 2,40 x 2,00 x 1,96 m Coolant System BMF - BMF 980 L -4 - NEW, unused - universally applicable - can be controlled via contactors - Number of pumps: 2 - Pump output: 5.5 kW, 2,950 rpm, 1.2 m³/h, 20.0 l/min, pressure 80 bar, max. temperature 80°C 2.2 kW, 3,501 rpm, 6.9 m³/h, 115.0 l/min, pressure 25 bar, max. temperature 90°C - incl. paper belt filter Technical Data (Motor): Rsdpfx Ajwhzm Iokxst - 1,350 rpm - 0.12 kW - incl. cooling unit (Deltatherm E4) Technical Data: - Power: 4 kW - Max. ambient temperature: 40 °C - Max. operating pressure: 28 bar - Refrigerant: R407C - Refrigerant quantity: 2.4 kg - Connected power: 2.5 kW

Condition: used, Year of construction: 2019, liter capacity 600 l Pressure of pump 8 / 20 bar control Schütze / Contactors weight of the machine ca. 450 kg dimensions of the machine ca. 1,2 x 1,8 x 1,6 m Coolant System BMF - BFU 600 /S2/20/8+ - NEW, unused Redpfx Ajwhzmzokxjt - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump performance: 2.6 kW, 3.5 HP, 2,880 rpm, 160 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: as good as new (ex-display), Year of construction: 2025, CMS Agil Lam Redswd If Nspfx Akxot Cutting table for Laminated Glas Glas Max. workable Size: 3.810 x 3.300 mm Thickness: 8+8 mm Min. Glas Thickness: 2+2 mm

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg Rodoxqzmkepfx Akxst - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 1005/40200317/2010, color: grey, macchina perfetta in ogni sua parte, pronta per essere messa in produzione composta da : sfilatore a cassetto / 3 mettifogli dei quali 1 con dischi di lancio 1 sdoppiabile per doppio inserimento inserti, 1 pivottante a 90 gradi per inserimento inserti in linea di senso di marcia, incollatore abbinato ad etichettatrice elettronica per inserimento indirizzi da 1 pollice a 4 pollici da 2 a 4 piste oltre anche per conti correnti, confezionatrice predisposta con apparato stirofilm per riduzione del lasco sacchetto, staker di raccolta e conteggio prodotti con espulsioone laterale e nastro meccanico di uscita prodotto. Rjdpfeuxmlijx Akxst

Condition: good (used), Year of construction: 2015, machine/vehicle number: AS4002/10, functionality: fully functional, This kiln is manufactured by the Italian company SITI and is suitable for firing sanitary ceramics. The guaranteed firing temperature is 1220-1230 degrees Celsius. It can also be used for corrective firing of sanitary ceramics. The kiln comes with 10 complete cars equipped with heat-resistant accessories. Additionally, it includes a manual shuttle for kiln cars and a hydraulic lifting table for loading pieces. Furthermore, there are 4 stainless steel exhaust chimneys included. The furnace was in operation for 3 years and was professionally dismantled in 2021. It is currently stored in Ludinovo, Kaluga Region, Russia. Rjdpfx Aksu S E Umjxst

Condition: good (used), Kemper SPA 150 Spiral Mixer - used - 240 kg dough capacity - 3 stainless steel bowls Rsdpjyucdaofx Akxst - collection from warehouse - price on request

Condition: excellent (used), max. width of grinding wheel 15 mm max. dia. of grinding wheel 110 mm max. module 0,4 - 8 pressure angle 15 - 25 ° turning speeds 2650 U/min total power requirement 0,4 kW weight of the machine ca. 0,02 t Rjdpfx Akovf Riusxet dimensions of the machine ca. 0,4 x 0,2 x 0,2 m For profiling grinding snails for tooth flank grinding machines. Finished and after-profile on the following models: NZA, AZA, RZ 300 E, RZ 301 S, Rz 362 A, Am, ... Adjustment plate on the right with micrometer screw adjustment axial To bracket a diamond roll.

Condition: refurbished (used), Used SPA 125 WP Kemper spiral mixer with 3 bowls Purpose: kneading dough for baking. The mixer body, bowls and protective cover are made of stainless steel. The control panel has two clocks. TECHNICAL DATA: • Bowl capacity: 300 l, • Maximum dough volume: 200 kg, • Number of speeds: 2, • Number of motors: 2 (bowl/spiral), • Number of timers: 2 pcs, • Power supply: 380V/50Hz, Redovuah Eopfx Akxjt • Power: 9.6 – 15.1 kW, • Dimensions: 850x1400x1480mm (L x W x H), • Weight: 680 kg.