Used Fanuc Model 15 for sale (30,267)

Condition: good (used), DC spindle motor, electric motor, DC motor, servo motor -Power: 11.5/18.5 kW -Speed: 1160/3500 rpm -220 V -79/96 A -Speedometer: 6V/krpm Isdpfx Abeb A Ngusgotf -Shaft: Ø 50 mm -Design: B3 -Additional cooling -Dimensions: 910/340/H400 mm -Weight: 200 kg

Condition: new, Fanuc A06B-1015-B100 AC Spindle Motor Model 15 , hole spacing of mounting holes: 185 x 185 mm , Ø drive shaft: 48 mm, unused, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Itjdpfji D H Rdox Abgjf

Condition: ready for operation (used), Fanuc DC spindle motor Model 15 , Attention nameplate is no longer legible , used, strong traces of use, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Itodoi D Hvqjpfx Abgjf

Condition: refurbished (used), Year of construction: 2008, The wrist is new and has never been assembled. It was as a spare part for a paint shop with Fanuc robots. The new price at Fanuc is €18,000.00. Ijdpfx Abjihb Axegetf

Condition: ready for operation (used), Fanuc A08B-0051-B002 FanucP-System Model H , used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Itjdpoi D Uzyefx Abgsf

Condition: ready for operation (used), Fanuc A06B-0651-B095 DC Servo Motor Model 10M SN:Y-620085, used, normal signs of use, 100% functional, scope of delivery as per photos Iodpfsvyb Azsx Abgetf

Condition: ready for operation (used), Fanuc Model L50/2000 Motor Spec. A06B-0572-B077 Servo Motor Serial Number: CS72G0835, used, good condition, 100% functional, scope of delivery as per photos Itjdpfxouhi H Se Abgjf

Condition: ready for operation (used), Fanuc AC Spindle Motor Model 40P 4P 18.5/22kW max. 4500 RPM from IKEGAI TURN 25, L x W x H: 625 (+ shaft 140) x 315 x 400 mm, hole spacing of the fastening holes: 255 x 280 mm, Ø drive shaft: 60 mm, it is probably type A06B-0758-B201 #3000, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Iodpei D H Sbsfx Abgotf

Condition: new, Fanuc A06B-0854-B300 # 3030 AC Spindle Motor Model ? 6, serial number as per photo, unused, 100% functional, (fan cover missing) Scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Itedpfx Abji D H N Djgjf

Condition: used, overall weight: 1,210 kg, load capacity: 165 kg, arm reach: 2,650 mm, controller model: RJ3i model B, repeat accuracy: 0.2 mm, Payload: 0/165 Kg Arm reach: 2.65 mmNumber of Axis: 6 Repeatability: 0.20 mm Robot weight: 1210 Kg Mounting: Floor Itodsruw A Hopfx Abgjf

Condition: used, Year of construction: 2014, operating hours: 5,000 h, functionality: fully functional, overall weight: 3 kg, total length: 500 mm, total width: 500 mm, total height: 200 mm, input voltage: 24 V, input current: 4 A, type of input current: DC, for sell ̶1̶.̶F̶A̶N̶U̶C̶ ̶A̶1̶3̶B̶-̶0̶2̶0̶2̶-̶B̶0̶0̶2̶,̶ ̶1̶5̶i̶n̶c̶h̶ ̶p̶a̶n̶e̶l̶ 2. FANUC STAND ALONE Control Unit - A02B-0323-B804 with 4 options: A20B-8101-0742 (FSSB-3) A20B-8101-0050 (Master CN1) A20B-8101-0770 (ETHERNET CD38R) Itodpfx Ajwq Dpdebgof A20B-8101-0770 (ETHERNET CD38R) ----- 3.Keyboard for FANUC - A02B-0323-C231 you can buy separately

Condition: like new (used), Year of construction: 2006, operating hours: 39,475 h, functionality: fully functional, machine/vehicle number: 80022, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It was once used at BMW to clear coat luxury car bodies and, with its 40000 hours, has a certain working life behind it. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control system. The second additional amplifier is used to control motors in the shoulder for gear pumps. However, these motors are not installed. The rail motor would then be connected directly to the robot. The cable length between the robot and the controller is 10 m and can be plugged into the controller. This is also special. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as left-armed and left-handed. It has line tracking. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if you are seriously interested. We have two of them. Itedpfx Aotu H Hcsbgef We would also bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2007, operating hours: 92 h, functionality: fully functional, machine/vehicle number: 82351, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: RJ3iC, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended as a replacement robot at BMW for clear-coating luxury cars. It was never used and is therefore as good as new. The robots at BMW worked on a rail. For this reason, a large additional amplifier is installed in the control unit. The corresponding motor is also included. It is practically connected to the robot itself. This means it can be mounted directly on the carriage. Another special feature of this robot is that a motor is built into the shoulder to control a gear pump. This means that dosing on the robot is no problem. The cable length between the robot and controller is 2x10m and can be plugged into the controller. This means 10 m of cable through e.g. a chain from a rail and then another 10 m pluggable to the controller. This is also special. We give a 1-year commissioning guarantee. We can help with transportation and installation. Iedpotu H Avjfx Abgetf It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device is still with our customer, but can be inspected under voltage at Paintrobotics if there is serious interest. We would bring the device to us from Frankfurt.

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. Itjdotu Hpqjpfx Abgsf We give a 1-year commissioning guarantee. We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Itodpfoyw Tbvex Abgjf Approximate total capacity 15 litre (product dependent). This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Click on the link below to see a video of the machine running.

Condition: good (used), Year of construction: 2015, Power: 3.000 Watt Type: A04B-0820-B342 Weight of unit: 750 kg Size LxWxH: 205 x 75 x 120 cm Ijdpfxewav I Rj Abgetf Complete with: - Stability unit - Fanuc transformer DTU60/2/0/5S - CNC Controllerunit Fanuc Series 31i-LB

Condition: like new (used), Year of construction: 2017, Technical Data Product Number: SK 15-320 Year of Manufacture: 2017 Machine Dimensions: 2100 x 1000 x 1700 mm (W x D x H) Belt/Knife Width: 665 mm Weight: approx. 420 kg Degree of Protection: IP 69 Capacity: 12 tons/8h Very sharp roller Machine can be integrated into a production line The Townsend SK 15-320 skinning machine is a conveyor-type skinner designed for removing pork skins from applications such as bellies, jowls, back fat, slices, and other pork by-products. This versatile skinner can also be used for flat, heavy beef applications where the removal of large amounts of fat is also required. Iedpfsy A T Hpox Abgotf Features: - Linear bored housing ensures perfect alignment of the toothed roller and incision mechanism. - Single drive belt positioned on one side for easier maintenance - Adjustable height output conveyor is ideal for various production line setups - Available with adjustable or fixed lower base - Assisted opening and closing of the cover - Available with adjustable or fixed blade clamp - ThinAdjust control allows adjustment of skin thickness during operation - Available with entry and exit extensions for multiple production line layouts - Open conveyor frames for easy maintenance and sanitation - Low operational costs - Easily adjustable pneumatic or spring cylinders ensure optimal performance for various products - Easy-to-lock upper feed mechanisms - Fully dismountable for cleaning Fully functional after service. No tools required for disassembly and cleaning Pressure adjustment of the rubber wheels is required during operation to improve the skinning process for either tall or short products The unit is in perfect condition, free of defects after a complete overhaul Complies with all European Union standards and safety requirements – CE certification.

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Ijdpfxsymawho Abgetf Click on the link below to see a video of the machine running.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VER927599-40 R2, Year of construction: 2014, operating hours: 526 h, load capacity: 1,500 kg, fuel type: electric, mast type: duplex, motor manufacturer: STILL, tire condition: 85 %, rear tire type: cushion tires (black), Equipment: full service history, pallet forks, We are offering this STILL RX50-15 forklift truck in very good condition, year of manufacture 2014. Manufacturer: STILL Model: RX50-15 Iodpfoyup Avjx Abgstf If you have any questions or need more information, feel free to send us a message or call us.

Condition: excellent (used), JDK Type/Model: WDE-S1K-15/+ 15°C/004 Industrial Water Chiller JDK WDE-S1K-15/ Chiller | 400 V | R407C Description: For sale is an industrial water chiller / cooling unit (chiller) manufactured by JDK. The unit provides reliable cooling of water or water-glycol mixtures for machines, production facilities or technical processes. It is designed for continuous operation in industrial environments and features an integrated circulation pump, electronic temperature control as well as comprehensive safety and monitoring functions. Technical Data: Manufacturer: JDK Model: WDE-S1K-15 / +15°C Year of manufacture: 2021 Supply voltage: 400/230 V, 50 Hz Power consumption: max. approx. 15.5 A Refrigerant: R407C Compressor: Copeland Scroll Mobile on castors Protection class: IP43 Isdpfjya Dq Ssx Abgjtf Weight: approx. 270 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is provided without guarantee!) If you have further questions, please feel free to contact us by phone.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,109 h, screw diameter: 36 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S150iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. Itodsx S Slcopfx Abgsf • Power supply: 200 V, 50/60 Hz; 220 V, 60 Hz • selection unit: no • beam spacing: 560 x 510 • single platen: yes • Optional: Wittmann Handling

Year of construction: 2016, operating hours: 24,285 h, condition: ready for operation (used), controller manufacturer: FANUC, overall weight: 4,400 kg, screw diameter: 36 mm, This FANUC Roboshot S150iA was manufactured in 2016. It is an electrical injection moulding machine featuring a screw diameter of 36mm and a closing force between 150-180 tons. It operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V 50/60 Hz; 220 V 60 Hz • FLA (Full Load Amperage): 54.6 A • SCCR (Short-Circuit Current Rating): 5 kA • Increased closing force -> 180t • HOPPER FLANGE SET GR4 • I/O BASE UNIT • CABLE KIT Itodjx Utzdepfx Abgjf • ANALOG OUTPUT MODULE ADA02A • 8-02 ANALOGUE CORE FUNCTION • CORE PULL 2-FOLD ANALOGUE_MOB • NOZZLE ADAPTER D16 M36X4/M24X1.5 • 7-01 EUROMAP 63 INTERFACE • NOZZLE TIP FOR ARBURG M24X1.5 • Optional: Wittmann Handling

Condition: used, Type: A06B-6150-H075 Iedpoym D Haefx Abgjtf Works flawlessly.

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding Itsdsx D Rq Ejpfx Abgsf

Year of construction: 1996, condition: ready for operation (used), CNC control FANUC FANUC 15TF Itedpfogqucpjx Abgjf Complete control with axis controllers X and Z for CNC lathe.