Used Gannomat for sale (67)

Condition: good (used), Year of construction: 1998, Ganner Universal Dowel Drilling Machine Universal dowel drilling machine for: Drilling carcass frames, hardware, and row of holes Drilling beam with 21 spindles Pitch 32 mm Guide rails for drilling rows of holes Angle stops Additional accessories Pneumatic pivoting of the drilling beam Working width 640 mm Portal passage approx. 750 mm Drilling stroke approx. 100 mm Ksdez Dt Hyjpfx Aafjnb Position adjustment of the drilling unit 0-45 mm Position adjustment of the row of holes approx. 300 mm Motor 1.5 kW Technical data available upon request The data has been taken from a brochure, therefore no guarantee is given.

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm Kedpfx Aaszu A D Eefonb including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 390.829, functionality: fully functional, operating hours: 6,700 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 5,600 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 75 kg, number of axes: 1, number of slots in tool magazine: 1, actuation type: electric, total height: 1,409 mm, total length: 1,484 mm, total width: 2,325 mm, table width: 1,000 mm, Equipment: CE marking, For sale due to acquisition of a new machine: our Gannomat Protec 571 CNC machining center, purchased new in 2018. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for producing furniture components and panels. Its advanced automation and robust construction ensure repeatable results and significant time savings in production. This machining center is especially suitable for workshops aiming to optimize productivity and achieve seamless machining processes. Technical specifications: - Workpiece width X: 60 - 1000 mm - Workpiece length Y: 250 - 5600 mm - Workpiece height Z: 6 - 60 mm - Workpiece weight: 75 kg - Rapid machining: 21 drilling spindles - Stable grooving unit: 8.3 mm saw blade width - Powerful milling unit: 5.5 kW (S1), with reversible rotation - Compact footprint: Less than 3.3 m² Including with the machine: Knodpfezhrdzjx Aafob - Drilling tools and 1 pc. HSK63 chuck and tool for modern joinery applications. Optional software: - Gannomat Editor office software: €1,000 (installation and activation by Gannomat for an additional fee) - DXF postprocessor for efficient operation: €1,000 (installation and activation by Gannomat for an additional fee) ATTENTION: Low operating hours. The price of the machine does not include VAT.

Condition: new, Year of construction: 2026, GANNOMAT "PROTEC 571" (Drilling, Grooving, Milling) Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Requirement for horizontal Lamello P-system milling - Requirement for milling diameter > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode Kodpjzgfwlefx Aafonb max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and milling cutter set 1 HSK mounting set 1 Mounting device HSK63F, simplest operation with the highest level of user comfort thanks to the roller clamping system, no clamping or tightening required, mounted on a stable base or on a workbench 1 Hook wrench for HSK63F collet 462E 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 Counterpressure device from above 1 LED lighting in the machine's working area 1 Tool for vertical Lamello P-system milling Machine with very good equipment including many drills and tools New machine with full warranty. The machine can be viewed and demonstrated in our showroom. A special price can be offered for our showroom machine!!!!!

Condition: used, Year of construction: 2019, Machine design: Throughfeed/Return feed Working area in X-direction: 1300 mm Working area in Y-direction: 5600 mm Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Knedpoymp N Tefx Aafeb Main spindle power: 5.5 kW Main spindle speed: 1000-20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change stations: 3 Back wall grooving units: fixed in Y-direction Vertical drilling spindles - in X-direction: 3 Vertical drilling spindles - in Y-direction: 10 Horizontal drilling spindle in X-direction: 2 Horizontal drilling spindle in Y-direction: 6 Control system: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Online connection possible: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: various tools Operating hours: 920 hours Weight approx.: 1800 kg Extraction diameter: 3x80 mm Machine was modernized in the factory; pressure bar and control technology from model 0572! Storage location: Customer

Condition: good (used), Year of construction: 2005, Length: 2300 mm, unlimited as it is open on the sides. Knsdpezzrdzofx Aafeb 4 stations for drilling, inserting dowels, and applying adhesive. Equipped with a new adhesive nozzle.

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Selekta Dowel Insertion Machine Year of manufacture: 2026 Dowel insertion machine with a pistol grip for simultaneous gluing and dowel insertion. Designed for professional and efficient dowel processing in furniture and frame construction. • Consistent dowel insertion depth • Always consistent and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary Kedevxgm Njpfx Aafjnb • Easiest cleaning of the gluing system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with incorrect diameter and length by the Auto-DL selector • Dowels are not driven in based on force; the dowel insertion depth is set independently of the bore hole depth • Recoil-free, extremely lightweight, and comfortable glue-dowel insertion pistol • Significant time savings compared to using a glue bottle and hammer

Condition: used, Year of construction: 2023, New demonstration machine! List price: €93,317 net. Basic machine complete in standard configuration for drilling and grooving: Detailed technical data can be found in the data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4-axis drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool changing, motor 5.5 kW (S1), 1000-20000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connection power 12 kVA, rated current 17.5 A, fuse 32 A, voltage 400 V, 50 Hz, 3 phases (without transformer). Power supply system TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: coupling connector (quick coupling) ¼, DN7.2, brass, factory side. To the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle dia. 80 mm. Extraction speed 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight approx. 1650 kg (with options!). Machine installation location: In principle, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: ProTec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via slat curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for ProTec shaft ø 10 mm with clamping surface (JSO): 1 HW roofing drill 5x70mm (cutting depth 35mm), LH # 30566-5-05035-L3. 1 HW dowel drill 5x70mm (cutting depth 35mm), RH #30540-5-05035-R4. 1 HW dowel drill 5x70mm (cutting depth 35mm), LH #30540-5-05035-L3. 1 HW dowel drill 8x70mm (cutting depth 35mm), RH #30540-5-08035-R. 1 HW dowel drill 8x70mm (cutting depth 35mm), LH #30540-5-08035-L2. 1 HW dowel drill 10x70mm (cutting depth 35mm), LH #30540-5-10035-L1. 1 HW countersink drill 15x70mm (cutting depth 35mm), LH #30300-5-15070-L1. 1 HW countersink drill 20x70mm (cutting depth 35mm), RH #30300-5-20070-R1. 1 HW countersink drill 35x70mm (cutting depth 35mm), RH #30300-5-35070-R. 1 HW grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LH, Leitz. Only for chipboard and MDF, solid wood on request and by agreement. Tool holder HSK63 F, 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Carbide shaft cutter Z1+1, 1.0 pcs. with WP drill cutter ø20, S25, LH 120, L2/L3 58 mm. Grooving cutter HW indexable insert Kedpfx Ajw Tfzfeafenb

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Knodpfx Aaezlbrvsfob Location: DE-63934 Röllbach

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm Kodpfjw Sguwjx Aafenb - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2000, 220V, 1 phase, 50Hz Air connection: 6 bar Knsdpezktq Ijfx Aafob Complete in standard design with: - Dowel feed via electronic vibratory feeder - Automatic dowel length and dowel diameter control - Fully automatic electronic control with program selector switch GLUING – APPLYING – INSERTING - 8-stage glue quantity selector switch via time pre-selection by electronic control - Closed glue system with 6 bar glue pressure via glue nozzle for glues with a viscosity of 150 to 350 mPas - Selector switch GLUE/WATER for rinsing the glue system - Control lamp for displaying the remaining glue quantity in the glue container - 1 stainless steel container for 5 kg of glue and - 1 stainless steel container for 5 liters of water for rinsing including 1 gun for dowels Ø mm, dowel length 25 - 50 mm, pre-set to 35 mm, insertion overhang 7 - 20 mm Location: Nattheim

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Knedpfx Ajxwaz Hoafsb

Condition: good (used), Year of construction: 2009, functionality: fully functional, Dowel Insertion Machine Ganner Selekta 252 Kedpfx Aaoycf Ikjfonb Year of manufacture: 2009

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Dowel and multi-hole drilling machine Kjdozvm Hajpfx Aafjnb including stops READY FOR USE

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale is a high-quality dowel drilling machine, a GANNOMAT OPTIMA 21, Type 510, manufactured in 1999. Kodpjy Szhysfx Aafenb The machine operates cleanly and precisely and is perfectly suited for dowel joints, hole patterns, and carcass processing. Technical data: +Manufacturer: GANNOMAT / Ganner +Model: OPTIMA 21 +Type: 510 +Year of manufacture: 1999 +21 drilling spindles +32-mm system +Drilling width: approx. 640 mm +Pneumatic workpiece clamping +Horizontal and vertical drilling possible +Foot pedal operation +Spindle speed: approx. 2,800 rpm +Motor power: approx. 1.5 kW +Connection: 400 Volt high voltage +Compressed air connection required +Robust industrial design +Weight: approx. 400 kg Condition / Equipment: +Fully functional +Well-maintained condition +Ready for immediate use +Heavy-duty professional design +Precise stops and easy operation Perfectly suited for: -Furniture manufacturing -Kitchen manufacturing -Interior design -Carcass production -Series drilling -Dowel joints Price: €2,950 net Inspection and test run possible at any time by arrangement. Loading can be assisted, or shipping via a freight forwarder is possible. You will receive an invoice with VAT shown.

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Kodpoxnlflefx Aafjnb

Condition: used, Used Machine Features and Technical Specifications: - Fully automatic pneumatic control with control panel Kedpfxszyy Dyj Aafjnb - Clamping, drilling, and unclamping; electric intermittent operation - Drilling unit: Number of spindles, pitch 32 mm: 23 Speed: 2,800 rpm Motor power: 1.5 kW/380 V Drill chuck for tools with a 10 mm h6 x 20 shank and flat Adjustment range for position settings: 0–60 mm Drill hole depth for drills with a total length of 57 mm: 0–30 mm Drill hole depth for drills with a total length of 77 mm: 0–50 mm Drill hole depth for drill bits with a total length of 95 mm: 0–70 mm - Passage width: max. 800 mm - Clamping height: max. 80 mm - Working height: 850 mm - Space requirement without stop ruler: 1200 x 900 mm - Compressed air connection: 6 bar - Sound level: less than 82 dB(A) - Weight: approx. 400 kg

Condition: used, Year of construction: 1985, Used Machine Year of Manufacture: 1985 Knedjzk N Dwspfx Aafeb Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: DE-63934 Röllbach

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Knjdpexc Hi Ujfx Aafjb Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: from below & from the front - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Passage dimensions: max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see images) Availability: at short notice Storage location: Röllbach Kjdpfx Aozk Nuijafonb

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm Knjdpfxjxdttis Aafob - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 units Knjdpfxoihghrj Aafob Pitch: 32 mm Drill chuck: Clamping surface, drill shank: 10 mm Operation: Foot pedal Tools: Yes, in mm Drilling direction: from below and from the front Swiveling: Manually Swiveling angle: only 0° or 90° Max. pass-through height: 80 mm Max. pass-through width: 750 mm Number of material clamps: 3 units Type of material clamping: pneumatic Design: Stationary Stop system: only for this series Weight approx.: 400 kg Motor power: 1.5 kW Dust extraction diameter: 120 mm Location: Customer

Condition: used, Second-hand machine Second-hand Ganner Compact 30 row drilling machine Features and technical specifications: 2 drilling beams, each with 15 spindles Pitch 32 mm Drilling unit position adjustment 0–650 mm Distance between rows of drill holes: at least 190 mm Kjdpfszk Nwdjx Aafjnb Spindle speed 2800 rpm Motor power 2 x 0.75 kW Maximum workpiece clamping height: 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) Kedpfezxn S Aex Aafsnb 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Features and technical specifications: - with 7-spindle row drilling head with positioning pins - Spacing 32 mm - with drilling head for BLUM hinges - with drilling head for Hettich hinges - with the corresponding press-fit dies - Motor 400 V, 0.75 kW, 2800 rpm Knsdpfozk N Agjx Aafsb - with stop bars Availability: at short notice Storage location: 63934 Röllbach