Used Fasti 212-32-5.0 for sale (8,717)

Condition: used, Year of construction: 2000, Max. bending length: 3240 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Program control via touchscreen (backgauge, bending angle adjustment, upper beam stroke, sheet thickness, quantity, etc.) Motorized height adjustment of the bending beam (adjustment of the sheet thickness) Nwsdpjw R Uiasfx Akcof Manual and automatic mode possible Controlled backgauge with spring fingers Central lubrication Various additional bending and reinforcement rails operation manual 5700 kg

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW Nwsdpfx Akjy Em Dgocsf - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm - Weight approx.: 4500 kg

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Nwodpfx Aoyhqhtekcef Lifting height of the upper beam and material thickness can be preselected via dip switch Bent rail and machine in top condition Weight: approx. 3000 kg

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Manual and automatic mode possible Motors adjustable rear stop with spring fingers and digital display Nedpoyglvvofx Akcewf Central lubrication Segmented upper and lower gate rack for 2050 mm 5600 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper cheek stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Nedpox Ebt Tjfx Akcjwf Manual backgauge with spring fingers 4000 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: 02212007, control type: CNC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, Swing bending machine in excellent condition. It is powered on and can be inspected at any time. Nwedpex Eiw Tjfx Akcof

Condition: used, mileage: 520,000 km, power: 256 kW (348.06 HP), first registration: 06/1977, fuel type: diesel, number of seats: 32, gearing type: mechanical, color: beige, Year of construction: 1977, Equipment: parking heater, soot filter, * Setra 212 HM with 32 seats – 6-speed manual transmission – Toilet – Kitchen – Round lounge area Nedjyy T N Sjpfx Akcewf * Diesel – 12,675 cc – 256 kW – 350 hp – Euro 0 – No emissions sticker – 8 cylinders – Air suspension * 32 seats + 1 driver – Auxiliary heater – Radio – Single door at front & rear * Vehicle dimensions: Length: 10,370 mm x Width: 2,500 mm x Height: 3,090 mm * German vehicle – German registration documents – Sale on behalf of customer * Errors, misprints & prior sale excepted – Available immediately * Viewing & test drive by appointment only * Contact person: Andreas Vogel * ATTENTION – Vehicles are stored off-site – Please inquire for exact location – ATTENTION –

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. Nedpfxoum Ttze Akcswf A demonstration under power is possible at any time in our exhibition hall.

Condition: new, cutting diameter 300 mm Nwodpexabavefx Akcof capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm Nsdjfg E H Eepfx Akcswf capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: used, machine/vehicle number: IC1340, Year of construction: 2020, operating hours: 3,532 h, load capacity: 1,200 kg, lifting height: 4,300 mm, construction height: 1,915 mm, enginetype: Electric, manufacturer: Jungheinrich Nwsdsy E D Nyjpfx Akcef

Condition: like new (used), Year of construction: 2017, Used automatic bandsaw MEP Shark 332 nc 5.0 Blade dimensions: 3320x27x0.9 mm Cutting angle range: -45° to +60° Blade speed: 15 - 100 m/min Cutting capacity at 0°: - round 300 mm - square 260 mm - rectangular 330x260 mm Four operating modes: manual, semi-automatic dynamic, semi-automatic, and automatic Year of manufacture: 2017 Machine weight: 1150 kg Additional equipment: - special vise to reduce remnants Nwsdpfoxz Ulbex Akcjf - KIT IoT Industry 4.0 Ready The machine is like new. It has only 515 operating hours.

Condition: new, functionality: fully functional, overall weight: 17 kg, 7 units in stock. Various models available. Export possible. Nodpfx Akeyyp Tmscjwf

Condition: new, dimensions of saw-band 3650 x 27 x 0,9 mm speed 15 - 100 m/min vice 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330 x 260 mm capacity 45 degrees: round 260 / 200 mm capacity 45 degrees: square 250 / 180 mm capacity 45 degrees: flat 270 x 200 / 200 x 160 mm capacity 60 degrees: round 180 mm Nsdeyv Nylspfx Akcowf capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170 x 170 mm total power requirement 2,2 kW weight 1.105 kg dimensions 2700 x 2300 x 1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45 ° right to 60 ° left) - Semiautomatic dynamic system (manual lowering of the saw band bow up to the desired position and cycle start via the push button.) - Manual or semi-automatic-dynamic cycle to cut directly without Programming. Some features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines to display the technical parameters such as: - Saw blade speed - Number of programmed and executed cuts - saw blade thickness - feed length - cutting time - ammeter - belt tension - Display of (about 100) diagnostic messages and warnings, everything in the respective user language. - Display and entry of the alarm and error messages with the possibility of display incidents that have occurred. - automatic parameter setting via control, if a new driver or Inverter is mounted. - Electronic inverter for continuous regulation of the belt speed of 15 up to 100 m / min. - New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. - New material supply of 600 mm with stepper motor and ball screw mounted on opposite ball bearings. - Hublauf the saw blade directly from the control panel programmable, for Adaptation to the cutting material. - Electronic band tension control. - Automatic monitoring of the cutting load by a direct on the Cylinder mounted servo valve. - The coolant sump (equipped with 2 electric pumps for lubrication and Cooling of the saw blade) is installed in the base. - Swarf drawer (can be replaced by a chip conveyor - see Optional) - Preparation for the installation of the minimum lubrication set of the saw blade (Optional), in addition to conventional standard lubrication with emulsion oil. Chip removal brush. - Machine is intended for lifting truck transport. - Bi-metal saw band for solid and profile material.

Condition: good (used), Item: D-1915 Grundfos Pump PUMP, GRUNDFOS Type TP-32-120/2 Bar/C - 10/90 Nwodpfsppxy Ejx Akcof Q - 9.0 m3/h H - 7.1 m n 2890 min Hz 50 More information at attached photos.

Condition: used, Manufacturer: Mesutronic Nsdexcudmjpfx Akcswf Throughput: 350 x 80 mm

Condition: used, functionality: unexamined, Ferwood Code: RU0011675 - Manufacturer Code: 4-008-32-1204 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer refurbishment service, please contact us. 1.5KG - 36X26X21 Nodoybbtmspfx Akcowf

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder Nedpfx Akjqv Hqgjcjwf -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke distance: 75 mm -Piston: Ø 32 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Proximity switch: 2 pieces, see photos -Quantity: 4x cylinders available -Price per piece -Dimension: 200/40/H60 mm -Weight: 0.4 kg/pc.

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder Nsdsxab S Eopfx Akcowf - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, mileage: 95,862 km, power: 96 kW (130.52 HP), first registration: 11/2019, fuel type: diesel, color: white, gearing type: mechanical, Equipment: ABS, airbag, central locking, cruise control, immobilizer system, onboard computer, Special features - ABS - Radio - Airbag - On-board computer - Power steering - Cruise control - Driver’s seat with armrest - Electric windows - Electronic immobilizer - Central locking with remote control - Ladder rack - The vehicle is equipped with a new genuine particulate filter valued at €2,300. Superstructure Aerial Work Platform Time Versalift ETL-32-125 - Working height: 12.5 m - Lateral outreach: 7.3 m - Basket capacity up to 120 kg - Rotation: 360° - Remote control - Engine start/stop function - Electric emergency pump - Hour meter - Flashing beacons - 220V socket in the basket The vehicle is fitted with an aerial work platform (model Time Versalift ETL-32-125), mounted on a Renault Master. This telescopic platform is ideally suited for maintenance, installation, and inspection work at heights of up to approximately 12.5 m. An ideal vehicle for municipalities, utility companies, telecommunications, or trades businesses. All platform functions are operational and have been checked by our workshop. The vehicle is ready for registration. German papers, TÜV, and UVV are included free of charge. Additional features such as tow bar, lighting, shelving, and more are available on request. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations are made exclusively with original photos taken in-house – guaranteeing full transparency regarding the actual condition of the vehicle. Our vehicles undergo extensive reconditioning in our own specialist workshop prior to sale – including mechanical, bodywork, and paintwork. Therefore, they are optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good – verification is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – including remote inspection. Nwjdpfswz Ik Hjx Akcjf Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Custom financing and leasing options - Trade-in of your current vehicle - Installation of special equipment on request Looking for something specific? If you currently can’t find a suitable vehicle for your company in our inventory, contact us – we will be happy to assist you. For technical details, additional photos, or a personal consultation, we are always at your disposal. All stated prices are net prices. The contents of our website are created with the greatest care and updated regularly. Nevertheless, they are for general information only and do not replace individual advice. Only the information in the purchase contract is legally binding. Subject to changes, errors, typographical mistakes, and prior sale.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 150042, Offer 25328 Technical Data: Nodpfxjxl Ryps Akcjwf - Max. cutting width: 3200 mm - Max. cutting capacity at 45 Kp/mm²: 12 mm - Frame throat depth: 175 mm - Cutting angle: 1.48° - Manual blade gap adjustment - Number of hold-downs: 13 units - Strokes per minute: up to 10 1/min - Front squaring arm approx.: 1100 mm - 2 front support arms approx.: 1100 mm each - Motorized back gauge with positioning control up to: 1000 mm - Rear area safety with light barrier - Cutting line illumination - Working height: 860 mm - Electric foot pedal - Drive: 400 V / 19.5 kW - Space requirements (approx.): W 4150 x H 2150 x D 2300 mm - Weight (approx.): 8.5 t

Condition: used, Year of construction: 1992, Max. cutting length: 1250 mm Max. sheet thickness: 4 mm steel Controlled rear stop Side stops and table extensions cutting length limitation Cutting edge lighting Light barrier for safeguarding the rear area knife sharpened Njdpfx Akey Dcdtecjwf Weight approx. 2800 kg

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. Nwedpfoy E Exvox Akcjf The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: excellent (used), Year of construction: 2007, Max. working width: 4040 mm For sheets with tensile strength of 40 kg up to: 3 mm Upper beam adjustment: 400 mm Nwedpfxey Av E Io Akcjf Lower beam adjustment approx.: 80 mm Max. electric bending angle setting up to approx.: 180° Upper beam adjustment drive: 4 kW Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm Electric connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm (height)

Condition: good (used), machine/vehicle number: 2299, Year of construction: 2000, load capacity: 32,000 kg, lifting height: 3,100 mm, mast type: triplex, fork carriage width: 280 mm, fork length: 2,300 mm, total length: 6,160 mm, total width: 3,350 mm, operation weight: 44,600 kg, Equipment: lighting, SveTruck 32120-46 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00x25 Nwsdeyuhmgopfx Akcof Wheel size – Steering wheel: 16.00x25