Used Finger Joint Press for sale (13,552)

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, year of last overhaul: 2026, Hydraulic finger jointing cycle press (Keilzinkpresse), cycle press for finger joint connections with a pressing force of 10 t. Wood width 80 – 300 mm, wood thickness 18 – 100 mm. OPTIONS: With 300 l hydraulic unit and 5.5 kW motor, manufacturer GOD; with electrical installation. Hjdpfx Ast Sc Swemiel

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Hedpfx Amjv T Aqysisl Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Finger joint press Cycle press for finger joint connections Finger jointing press Hedpet Sc T Iofx Amiel Pressing force 10 t Wood width 80 - 300 mm Wood thickness 18 - 100 mm OPTIONAL with hydraulic unit

Year of construction: 2008, condition: reconditioned (used), Max gluing length 3m Minimum gluing length 1.5m Hjdpfek Uw Ukox Amiol Press in perfect technical condition The presse worked with Spanevello ARROW

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Hedpfxst Uduxe Amiel

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Storage location: Customer Hsdpfxsvvi Tye Amiol

Condition: used, Working width from to ~ 45 - 95 mm Working height from to tba mm Hedpsy Dh Siofx Amiol 3.000 mm milling height 130 mm Semi-automatic finger jointing line Sauter type RS for joining wooden workpieces by means of finger joints. The system is suitable for waste wood processing and for the production of extended solid wood lamellas. Including dismantling and loading. Fixed loading date: 15.06.2026. Consisting of: - Milling and gluing machine Sauter type RS-FPEL 130 - Press Sauter type RS-DKPV 6 - End length saw Sauter DAS 500

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: FSL-62H-FJ-420A, Furnimate Semi-Auto Finger Jointing Line, new 2019, very good working condition. Model: FSL-62H-FJ-420A Hjdpfxsuaf Rds Amiel Will accept Lengths from 300 to 1400m/m, x up to 180m/m high. Maximum Pressing Length up to 4,500m/m. Semi Automatic Single Sided Finger Joint Milling Unit with Cut off Saw, Scoring Saw & Milling Unit for the Finger jointing operation. Auto feed with conveyor to Glueing and pressing unit, will take timber jointed up to 4500m/m long x 1400m/m wide. Gluing Press with Auto ejection of the glued section. Show us your mobile number for images on WhatsApp. Can be demo'd working in Sheffield, Yorkshire UK. Full documentation available. Photos & Video etc, available on Whats App. Price ex. works, dismantled & loaded buyers transport: £28,500.00 + Vat if applicable, or Euro 32,000.00

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1240024978, input voltage: 230 V, operating pressure: 7 bar, pressure: 7 bar, We are offering this used elumatec EP 124 corner crimping press, year of manufacture 2011. Model: EP 124 Machine No.: 1240024978 Voltage: 230 V Frequency: 50 Hz Current: 1 A Power: 120 W Hodjy D Nbfjpfx Amisl Operating pressure: 7 bar If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025/002, Finger jointing machines and Hjdpfx Amecbyp Neiol lines are a masterpiece of woodworking industry >wood entry lengths 900 to 6100 mm< >wood rests and tools drive< >Best tooth milling quality and optimized cutting speed< >Long service life of the milling tools / dovetail cutters< -MINDA - MACH I (patented) -High performance finger jointing line -for KVH / DUO / TRIO / BSH / GL / CLT -technical running meters capacity = approx. 150 m/min -vertical and horizontal joints possible max. 200 x 300 mm -extremely flexible; short set-up times; reliable operation The only package system in the world that can also process a single board or single beam. -finger jointing machine, for vertical and horizontal milling, zinc profiles, made in Germany, along with new developments in the clamping stations and the transfer channel on the router table, has the Joema MACH I include a groundbreaking benefits, fast pace. Together with 1200 mm milling channel at 40 mm Thickness technical power meter = approx 150 meters /min, very reliable material transport - No vulnerable conveyor rollers, flaps and cross conveyors - high availability - for all sections including square suitable - by fully automatic, continuous channel matching is possible in extreme cases single mill - thus the system is extremely flexible, vertically horizontally and zinc profiles possible performance with KVH 160 x 280 mm are 38 meters / min, with KVH 100 x 300 mm, 64 meters / min, at BSH 45 x 250 mm are 110 meters / min, >>cutting-edge technology simply kept

Condition: new, Year of construction: 2026, machine/vehicle number: 2022-04, -wood entrance 300 - 3000 mm -cutting height max. 250 mm -wood rests and tools drive -Performance wood thickness 25 mm = 72 parts / min -Performance wood thickness 35 mm = 51 parts / min Finger jointing machine and lines are a masterpiece of the woodworking industry >simply the best fingerjoint system> Hedpfjcbyqfox Amiel Delivery time approximately 10 months The manufacturer and supplier MINDA industrial plants

Condition: excellent (used), Year of construction: 2017, Automatic finger joining line ! Manufacturer - MTM Year - 2017 Hsdpsy Auraofx Amisl Entrance width - 60 cm Capacity - 10m3/8h Line consists : Input conveyor Left and right milling machine Glue applicator Output conveyor Longitudinal pressing press - 6 m Electrical cabinet with control panel

Condition: repair required (used), functionality: not functional, Keilzinkenanlage dimter HK 400 for only fifteen thousand seven hundred EUR 15,700 EUR Finger-jointing plant for timber packages Wood input lengths: 800 - 6000 mm Milling height: 285 mm (option 300 mm) Colour: blue Repair required, sold as is The system has already been dismantled and is currently stored at the warehouse in Achern A lot of material for little money All technical documentation is available We will also provide you with technical support and answer all your questions Hsdpevi Hw Nefx Amiel

Year of construction: 2004, condition: excellent (used), machine/vehicle number: 2151, KNUCKLE JOINT PRESS "GRABENER" TYPE GK 360 Manufacturing origin CE - France Voltage 380V/50Hz/3ph Netweight 8800 kg Custom position 8462.1020 Dimensions 230x170x260 cm Hsdpfx Aed Hpcyemisl TECHNICAL DATA Power in tons 360 T. Table length 440 mm Table width 525 mm Ram stroke 60 mm Number of strokes 60 / Min. Motor power 11 kW errors and omissions excepted-data given without obligation

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GRECON Ultra automatic finger jointing line Year of manufacture: 2003 Technical condition: very good, machine regularly serviced Technical data: • input workpiece length: 150–1000 mm • timber width: 40–205 mm • timber thickness: 20–80 mm • output / pressing length: 6100 mm • pressing force: 120 kN / 12 t • max. cross-section for 10/11 mm finger joints in softwood: 100 cm² Hsdpfxoy Amk Uo Amisl • max. cross-section for 10/11 mm finger joints in hardwood: 80 cm² Performance: • vertical finger-jointing: • Ultra: 15.2 m/min Equipment / design: • 600 mm wide package milling unit • manual turning table • automatic turning of material and transfer to the press • the machine operates in a fully automatic cycle • 1 operator required Possibility of professional dismantling, assembly, commissioning, and operator training for the machine.

Condition: used, Year of construction: 1997, Dimter Profi Joint 600 KD Finger Jointing Line The line's throughput was 2.5 boards per minute. Board dimensions: L = 900 mm, H = 180 mm, and W = 600 mm. If the maximum volume of one full board is 0.081 m³ x 2.5 = ~0.2 m³, the material can be loaded into the machine in one minute. However, this directly depends on the size of the loaded raw material. Linear meters: We processed 10,000–12,000 meters in an 8-hour shift. Hodpsxmvxyofx Amiel Using raw material 24 mm thick and 98 mm wide. The length of the raw material ranged from 200 to 60 m. dismantled

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Hsdpjywztgsfx Amijl Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Hjdpjywztajfx Amijl Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Including tools

Condition: good (used), Year of construction: 2010, functionality: fully functional, Finger Jointing Line WEINIG NKT Doppel-Pack DP20 An industrial finger jointing solution – engineered for maximum precision and efficiency Technical Specifications: - Infeed timber length: min. 130 mm | max. 1000 mm - Outfeed timber length: min. 3700 mm | max. 7400 mm - Timber cross-section: min. 20 x 40 mm | max. 80 x 180 mm - Cutter diameter: 370 mm - Finger profile: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch - Glue application: double-sided, PVAC white glue - Connected load: 80 kW Note: The machine is currently dismantled and in stock at our facility. Inspection is possible by appointment. Scope of supply: - WEINIG NKT Doppel-Pack DP20 incl. control unit - Integrated gluing station for double-sided application - Operating manual & documentation Hydromat 17B (7 Spindles) General Information Hodpfx Amoy A Ttpoijl Manufacturer: Weinig AG Model: Hydromat 17B // 7 Spindle (various tooling) Type: High-performance profiling planer/moulder Year of manufacture: 1989 Operating voltage: 380 V / 50 Hz Bottom-Right-Left-Right-Left-Top-Bottom, rigid table Description Heavy-duty high-performance planer and moulder made from vibration-dampening, warp-resistant cast components in a modular construction system. Designed for precise and economical wood processing with sustained high capacity. Mechanical feed, adjustable between 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). Surfacing table length 2 m, quick adjustment available. Cutting depth for surfacing and jointing spindles, each adjustable up to 10 mm. Technical Data • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustable cutting depth: 10 mm (surface and jointing sides) • Machine version: No counter bearing, heavy-duty configuration

Condition: good (used), CMC Italia Q Finish Crater 20 Book Press Book press with groove cutter and heated platens. Manufactured by CMC, Italy. Technical specifications: Maximum format: 420 x 500 x 80 mm Weight: 420 kg Hodjywdtvepfx Amijl Pressure: 5000 kg Built-in hydraulic unit. Automatic book feed. Automatic format detection. 380V power supply + compressed air.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Set for micro-dovetail jointing for high-volume and mass production Features: – High-performance production line, – Heavy-duty working units, – High feed rates, – Accelerated handling movements ensure high throughput. Depending on the desired output, additional buffer conveyors can be integrated to speed up the production process. TENONER FC-10KZ-6 Specifications Values Milling spindle 50 x 210 mm; 5,500 rpm Spindle motor 18.5 kW Chipper saw (special) 300/60 x 8 mm Saw motor 6 kW Working table width 600 mm Workpiece package height 30 to 150 mm PRESS FC-10PZ6 Specifications Values Board width/thickness 30-150 mm / 20-70 mm Finished board length 6,000 mm Line capacity up to 15,000 linear meters/shift The following modifications and upgrades have been made to the machine: Hsdsx Idl Hopfx Amisl - New electrical installation - Machine controller replaced with SIEMENS SIMATIC S7 and SIEMENS SIMATIC HMI panel - New infeed table before the tenoners with buffering system - New board turning mechanism – side feeder after tenoners (chain-driven turning mechanism controlled by frequency inverter) - New chain feeder before the press (length 4,500 mm) - Additional pre-scoring aggregates for finger-joint gluing – furniture board installed at the tenoners Machine dimensions: 16.5 m x 5 m

Condition: used, Year of construction: 2011, Working width from to 80-120 mm Working height from to 30-80 mm Hjdpfxsyk H U Ie Amijl 1200-1600 mm

Condition: used, Year of construction: 2021, Working width from to 100-400 mm Working height from to 20-150 mm Dimensions (L/W/H) 2200x1650x1600 mm Weight 1300 kg Hodpeyk H Syjfx Amiol

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Finger Jointing Line GreCon Turbo-S 1000 Manufacturer: GreCon Model: Turbo-S 1000 Year of manufacture: 2007 Machine description: For sale: GreCon Turbo-S 1000 finger jointing line, year 2007, designed for efficient production of finger-jointed solid wood components. The Turbo-S 1000 is a well-known and proven GreCon solution for high output, precise finger profile machining and consistent joint quality. This machine is suitable for the production of structural timber, furniture components, joinery parts and solid wood elements for further processing. Depending on configuration, tooling and equipment, the line can process both softwood and hardwood. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Optional working width: up to approx. 225 mm - Working thickness: approx. 20 – 80 mm - Glue application system: FlankenJet - Number of press channels: 2 - Frequency-controlled feed - Material: softwood and hardwood - Machine type: high-performance finger jointing line - Application: production of finger-jointed solid wood components Features / advantages: - High production capacity - Excellent joint quality - Proven GreCon technology - Suitable for continuous industrial production - Compact and robust design - Good solution for joinery, furniture and structural timber production Hsdpfx Amjyu Up Ieijl Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling, press length and installed options. Manufacturer material for the Turbo-S 1000 series also shows high line output depending on joint orientation, timber dimensions and press configuration.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Finger Jointing Line GreCon CombiPact Manufacturer: GreCon Model: CombiPact Year of manufacture: 2006 Machine description: For sale: GreCon CombiPact finger jointing line, year 2006, designed for the production of finger-jointed solid wood elements. This machine is a compact and efficient solution for woodworking companies producing structural timber, glued components and solid wood elements for further processing. The GreCon CombiPact is well known for its reliable construction, precise finger profile machining and consistent production quality. Suitable for processing softwood and hardwood, depending on tooling and machine configuration. Technical data: - Input workpiece length: approx. 150 – 1000 mm - Working width: approx. 40 – 205 mm - Working thickness: up to approx. 80 mm - Pressing / output length: approx. 3000 – 6100 mm - Finger joint profile: typically 10/11 mm - Gluing system: automatic glue application system - Final press: included - Material: softwood and hardwood - Machine type: finger jointing line - Application: production of finger-jointed timber and solid wood components Hedpfeyu Unwjx Amijl Features / advantages: - Compact design - High precision finger joint machining - Reliable and proven GreCon technology - Suitable for continuous production - Good solution for joinery, furniture and structural timber production Condition: very good Note: Technical details may vary depending on the exact machine configuration, tooling and installed options.