Used Gannomat Dowel Inserting Machine for sale (65,402)

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical specifications: - Dowel driving unit for simultaneous gluing and dowel insertion - Dowel feed via maintenance-free vibratory feeders - Fully automatic, maintenance-free electronic control with selector switch FLUSH/GLUE/GLUE-INSERT - Self-contained gluing system - 1 stainless steel container 5 l for glue and 1 stainless steel container 5 l for water - Lightweight, handy, and recoil-free gun for 8 mm dowels - Capacity: 45 dowels per minute - Electrical connection: 220 V, 1 Ph, 50 Hz - Compressed air connection: 6 bar - Dimensions: 650 x 650 x 1100 mm - Weight: 110 kg Iodpfxow Rhlhs Abgjtf Availability: short notice Location: Röllbach

Condition: new, Year of construction: 2022, Demonstration machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner Iodpfx Aewt E Tvebgjtf Uninterruptible power supply (UPS) Quattro-HSK package incl. 4-position tool changer XL drilling head Double drill spindle in Y-axis Automatic central lubrication Availability: short notice Location: Flörsheim

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, 2 drilling spindles, individually selectable 1 glue gun (note: glue pump missing) Dowel insertion tool for 8 x 40 mm dowels The following issues were identified during testing: - Glue specification missing Iedpoytq R Esfx Abgjtf - Center stop rule missing - On the left working field, the front stops do not engage; instead, they lower when drilling on the right field - SPS module Beckhoff repeatedly fails. Machine must then be restarted. - Rubber pads under the hold-downs are missing. When inserting the dowels, the parts deform because the surface is too smooth

Condition: excellent (used), For sale: dowel inserting machine from Ganner in very good condition. Itsdpfx Absyyahnjgjf

Condition: excellent (used), Double-sided machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting - Electronic Programmer "CNI" NC 400 - Built-in command and electric cabinet - Max. distance between the horizontal heads mm 3200 approx - Movable and adjustable right side of the machine (according to the width of the panels) - No. 2 motorized conveyoring belts (HP 0.25 x 2 motors) - No. 1+1 dowels storage tanks for the automatic feeding to the nozzles Iedpfxew Ug A Hs Abgjtf - No. 6+6 horizonal inseritng nozzles (Glue injectors and dowel drivers) - High-pressure Glue-feeding system - Total installed power KW 5 ca.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Dowel Insertion Machine Ganner Selekta 252 Year of manufacture: 2009 Itjdpfxoycf Iko Abgsf

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Itedpfxjif Az Uj Abgjf Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Itedpfx Abod Ih Hyogof Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 100 mm Z axis - 105 mm 1 drilling unit horizontal (dowel drilling unit left) Drilling motor 380 V, 1,100 W Clamping chuck d = 8/10 4,000 - 11,000 rpm can be adjusted 1 drilling unit vertically from above - fixed Drilling motor 1.1 KW, 3,000 rpm Quick change of the drill head 1 drill head BKF 2/3, quick-changeable, (corner bearing) On the loose part, hardware according to customer requirements including drill replacement Control: electro-pneumatic with three axes NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE compliant, with 1 set of drilling tools Dübo je 1xd = 6,8,10,14 + 2 Roughing cutter d = 16, 1 milling cutter d = 20, ready for connection 1 drill head BKF 3, fast exchangeable for olives including drill bit Fitting according to customer requirements 2 drilling units 1 x horizontal for drilling from above (for tapes) 1 x vertical for dowel work, right Drilling motor 1.100 Watt, infinitely variable 4,000 - 11,000 rpm with collet chuck ER 20 2 Milling units for lock boxes 1 x horizontal for tapes, lock boxes 1 x vertically from above for PZ, pushers, tapes Milling motor 2.2 KW Speed ??adjustable 3,000 - 16,000 rpm Clamping tool holder ER 25 1 length stop right and left, working length 2.8 m NC-controlled When the length stop is used, the fixed stops are removed. Dimension: LxBxH = 2.50 x 1.50 x 2.20 m - Weight machine 850 kg PowerDrill LxBxH = 0,30 x 0,30 x 6,00 m - Weight length stop 100 kg 1 Dübelleim- and press-in station consisting of: - Swing conveyor for dowels with feed -Dübeleinpressstation -High pressure glue pump made of stainless steel with glue container - Full jet valve for precise glue application Exhaust nozzle Price for 1 dowel diameter The basic machine will be about 300 mm longer (Technical data according to manufacturer - without guarantee!)

Condition: new, Year of construction: 2025, functionality: fully functional, Gannomat Selekta dowel driving device Year of manufacture 2025 Dowel driving machine with gun for simultaneous gluing and dowel driving. For professional and efficient processing of dowels in furniture and frame construction. • Constant dowel driving protrusion Iodpovxgm Nsfx Abgstf • Always constant and correct amount of glue • Due to the correct amount of glue, no subsequent cleaning of the workpieces is necessary • Easy cleaning of the glue system via EasyClean, the automatic cleaning program • Automatic ejection of dowels with the wrong diameter and length thanks to Auto-DL-Selekt • Dowels are not driven into the bottom, the dowel driving protrusion is set independently of the drill hole depth • Recoil-free, extra-light and comfortable glue-dowel-driving gun • Great time saving compared to glue bottle and hammer

Year of construction: 2012, condition: excellent (used), Machine equipment with 2 working fields. 2 workpieces can be inserted independently of each other. Workpiece dimensions - length 110 - 800 mm - width 20 - 1700 mm - height 14 - 60 mm - Working height 900 mm Machine structure - 1 x horizontal drilling station 0,9 kW. Drill speed 7.200 rpm - drilling depth max. 30 mm - Drill depth 10 mm - total drill length 85 mm - 2 x glue application and dowel insertion station - 2 x dowels, dowel projection 15-20 mm - dowel center distance 96 mm - 2 x oscillating conveyor dowel - 1 x glue pump 18:1 - 2 x electronic glue control ELC Iedpfx Abjmrqriogotf - workpiece support table 1700 mm - 8 x workpiece clamping cylinders - Center stop for 4 working fields - Central lubrication with hand pump for grease lubrication - NC positioning of the height adjustment of the drilling and doweling station (Z-axis) - axis with position control, travel speed 12 m/min KOCH Numeric positioning control with 1 NC axis (X)

Condition: new, Bore diameter variabel mm Number of heads horizontal 1 St. Number of heads vertical 0 St. 1 Götzinger dowel gluing and insertion machine BLE With the BLE, the workpieces are glued and dowelled on the front. Optional the BLE can be upgraded with a drilling unit, counter milling unit and longitudinal stop will. A 10" touch panel allows easy operation for manual or online operation. Base frame: in a compact design, covered with sheet metal Table support approx. 800 x 200 mm position 1 ----- 1 glue station full jet valve Glue quantity precisely adjustable Glue gun for counter hole gluing position 2 ----- 1 stainless steel glue pump, high-pressure pump and glue hose item 3 ----- 1 press-in station with dowel separation and press-in cylinder item 4 ----- 1 oscillating conveyor for dowels d 8 x 50 mm with feed hose into the injection unit item 5 ----- 1 processing unit with cross table, linear guide and 3NC axis motors X = 200 mm processing width Y = 120 mm processing height Z = 50 mm offset item 6 ----- 1 positioning controller Touch panel 10" color 500 drilling patterns can be created and saved, which can be easily accessed when needed (1 drilling pattern can have up to 16 dowel positions) Software prepared for ONLINE connection With online control, the data for the control must be provided by the software be prepared. Our machine can then read and process this data. ----- Itodpfx Abju Uu Uzsgof Total price in this version Pos. 1 to Pos. 6: on request! Options with additional prices: ----- item 7 ----- 1 horizontal drilling unit, 1,000 W drilling motor Speed ??4,000 - 8,000 rpm, collet holder Pneumatic drill feed Surcharge: EUR 4,305.00 Additional accessories such as a larger touch screen, additional dowel station for additional dowel sizes or scanner for Program selection on request! Prices net plus statutory VAT, without packaging/shipping and without Installation. (technical data according to the manufacturer - without guarantee!)

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. weight 1500 kg Dimensions (L/W/H) 4800x1600x2400 mm Width mit Auflage 2300 mm Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Itsdpfxjd Ih Hqe Abgef Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. Milling horizontally for lock case / fitting etc. machine description Base frame in stable welded construction, linear guide for the X-axis Table top 3,000 x 200 mm 6 clamping cylinder pneumatic with auto. Ausweichhub 2 side stops for machining on the front side, manually swiveling in and out 2 longitudinal stops can be manually swiveled in and out Travel: X-axis - 3,000 mm working length Y-axis - 120 mm Z-axis - 105 mm Aggregate: 1 drilling unit (unit 1) vertically from above, drill motor 1,1 KW Speed ??1,500 - 12,000 rpm, 1 spindle, collet holder ER 20 1 Bohraggreagt (unit 2) vertically from above, drill motor 1,1 KW Speed ??3,000 rpm, with drill head quick change device 1 boring head BKF 3, olives, quick-change 1 boring head BKF 3/2 corner bearing, quick-change 1 milling unit (Agg.3) vertically from above, milling motor 2 KW, 1,500 - 16,000 rpm, collet holder ER 25 2 horizontal drilling units (Agg.4 and 5) 1.0 KW, 1.500 - 12.000 U / min, Collet holder ER 20 1 milling unit horizontal (Agg.3) 2.0 KW, 1.500 - 16.000U / min, Collet holder ER 20 Electro-pneumatic control with 3-axis control X, Y, Z NC positioning controller make B + R input via TFT display 10 " Machine complete with 1 set of drilling tools dm 6, 8, 10 and 12, 2 roughing carbide cutters HM dm 16, CE compliant, ready for connection Suction connection: 1 x dm 120 Power connection: 1 x 400 V, 16 amps Air connection: 1 x LW 9 mm OPTION: Longitudinal stops right / left with NC axis high / low programmatically, thus dimension input by folding / light measure possible, Dimension: LxWxH = 4.80 x 1.60 x 2.40 m - weight machine 1,500 kg (technical data according to manufacturer - without guarantee!)

Condition: used, Year of construction: 2013, Bore diameter , mm Number of heads horizontal , St. Number of heads vertical , St. 2 pcs. Götzinger drilling and milling centers ----- For sale on behalf of a customer! 2 identical machines: One machine for "left" parts and one for "right" parts. The machines can also be used individually. The machines were controlled via window manufacturing software, but can also be operated via the machine software. Both machines are equipped identically: - Left and right drilling units for front-end drilling. - 3 units for drilling and milling for longitudinal machining. - Parts are loaded once, and the unit carrier then moves for the various machining operations. Isdpfx Abjv N N Spjgetf Installation length per machine approx. 6 m. Individual sale possible: Price per machine 10,000 Euro See the enclosed PDFs for more information.

Condition: new, Year of construction: 2025, Advantages of Pre-glued Dowels • No additional glue required when inserting dowels • No cleaning required for the water supply system Advantages of the DübelJet Itjdpfxowu Dnnj Abgsf • Recoil-free gun • Simple handling • Mobile handheld device • Universal application range Technical Data of the DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (default setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (default setting, adjustable from 7 to 20 mm) Universal application • Insertion of pre-glued dowels (with water), especially in furniture manufacturing • Insertion of positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or cabinet connectors

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002. 2 pcs. CNC drilling heads from top. 1 pcs. Glue spraying head 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. Isdpet N Rixefx Abgstf For more photos and details please send the request.

Year of construction: 1990, condition: defective spare-parts repository (used), I sell the dowel inserting machine Cerisola Savona. Vibrations magazine and inserting head designed for 8mm dowels. Inserting gun missing ! Available immediately. Iodpfx Abjgzlrbogjtf 220V connection

Year of construction: 1990, condition: good (used), I sell the dowel inserting machine Cerisola Savona V3B. Vibrations magazine and inserting head designed for 8mm dowels. Itedjgzltnopfx Abgsf Available immediately. 220V connection

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Itsdpfox Utd Eox Abgef Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Inserting speed: 22,000 mail pieces/h Envelope stacking capacity: 3,000 pieces (24#) Insert stacking capacity: 2,000 pieces (single, folded 20#) Feeder capacity: approx. 45.56 cm Tolerance: ± 0.08 cm Format range: 9.84 × 16.19 cm to 17.62 × 25.08 cm MACHINE DETAILS Electrical data Power supply: 3 × 400 V, 3PN+E, 50–60 Hz Protection: 16 A Dimensions: approx. 11.89 x 0.92 m Counter reading: 145,000,000 Itodpjyzpgisfx Abgof The indicated dimensions and format sizes were taken from the data sheet and converted from US measurements (in./ft.) to cm. Note: The machine is currently under a full maintenance contract.

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm No of injectors: 1 Iodpfx Abet Hmt Ijgstf Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008343, Max. panel width: 70 mm Ijdpfx Absx A Tl Nogetf Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008342, Max. panel width: 70 mm Itjdpfxjx A Tc Uo Abgjf Max. panel length: 2100 mm No of injectors: 4 Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Iodpfx Aewuz S Dsbgstf

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 CNC axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel fences with numerical adjustment with 21 drilling spindles (10 left, 11 right) Spindle spacing: 32 mm Maximum drilling distance: 640 mm Maximum tool diameter: 40 mm Maximum drilling depth: 65 mm Maximum horizontal drilling height: 35 mm Working height: 860 mm Itjdpfxelk R Epo Abgsf Maximum panel thickness: 60 mm Maximum panel size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction port: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Iodpfx Asxwaz Hjbgotf