Used Hans Schoen Sh for sale (4,522)

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) Csdpou Nfmyefx Anworb *

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Crodpfx Anex Ehmyowsb

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2374, functionality: not functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 150 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 580 mm, table length: 450 mm, table height: 900 mm, ram plate width: 580 mm, ram plate length: 450 mm, distance table to ram: 430 mm, oil tank capacity: 380 l, total length: 1,200 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 4,200 kg, installation height: 430 mm, pressing speed: 25 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been tested for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure the press is almost as good as new. Crjdpfsxyxx Ajx Anweb

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Crjdpey H Ibvjfx Anwjb Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Credpfovw Spmox Anwsb Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Credpfx Asgbvkvjnwob Height: 4700mm Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Crjdpfx Aslmmwrjnwob

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ Codpfxjx Ry Nys Anworb 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Crjdpfx Anjtiwgiswjb Separate control cabinet Ritta Side passages Ground level installation

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Crodpfsx Ehlcjx Anwob

Condition: good (used), Year of construction: 1978, Hydraulic press, two-column press, oil hydraulic press, hydraulic press, high-speed press, high-speed hydraulic press Cedpjyzd I Uofx Anwjrb -Manufacturer: Hans Schoen, Hydraulic press type SH 100 -Pressing force: 100 tons -Motor: 11 kW -Clamping table: 580 x 440 mm / Bore Ø 150 mm -Max. insertion height: 435 mm -Projection: 650 mm -Max. stroke: 150 mm -Hole: Ø 50 mm -Dimensions: 1640/1300/H2650 mm -Weight: 4440 kg

Condition: used, Year of construction: 1983, pressure 120/15 t distance between columns 860 mm stroke 170 mm table-size 860 x 600 mm dayligth 350 mm max. distance table - ram 520 mm ram head dimension 860 x 600 mm hole in the table 200 x 140 mm Crsdsym Dz Dspfx Anweb table height over floor 850 mm total power requirement 25 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 2,3 x 1,7 x 3,4 m Maximum ram pressure: 120 kN Maximum pull-out pressure: 15 kN Sick light curtain Safety distance: 180 mm Maximum overrun: 15 mm

Year of construction: 1979, condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm Crodpfolp Uz Rsx Anwob total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Year of construction: 1978, condition: used, pressure 25 t stroke 100 mm table surface area 440x320 mm ram surface 360x220 mm hole in the table 160x100 mm Csdpolp U A Iofx Anwerb table height 900 mm tool hole in ram Ø 40 mm dayligth 280 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2100 mm

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm stroke 100 mm table surface area 440x320 mm ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm Crsdpfovnwd Dsx Anweb total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Crsdpfx Ansvi H Disweb Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: good (used), Year of construction: 2022, machine/vehicle number: 2210BE044456-036, Offer 26103 Technical data: - Operation via hand-held remote control with cable - Load capacity: 2000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 205 mm - Maximum lift table height: 990 mm - Lift stroke: 785 mm - Lifting speed with / without load: 25 / 15 mm/s Crsdpfsy I S Agjx Anwjb - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Required space: approx. W 2580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: good (used), Year of construction: 2021, Offer 26108 Technical specifications: - Operation via wired hand-held remote control - Load capacity: 2000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 205 mm - Maximum lift table height: 990 mm - Lift stroke: 785 mm Crsdpfjyz Su Njx Anwjb - Lifting speed with / without load: 25 / 15 mm/s - Lowering speed with / without load: 25 / 20 mm/s - Hydraulic drive: 400 V / 2.2 kW - Space required: approx. W 2580 x D 840 x H min. 250 mm - Weight: approx. 270 kg

Condition: good (used), Year of construction: 2021, machine/vehicle number: 2101-BE041437-014, Offer 26104 Crodpjyz Scmefx Anweb Technical data: - Operation via hand-held remote control with cable - Load capacity: 4000 kg - Platform size: 2500 x 820 mm - Minimum lift table height: 230 mm - Maximum lift table height: 990 mm - Lift/stroke: 785 mm - Lifting speeds with / without load: 25 / 15 mm/s - Lowering speeds with / without load: 40 / 35 mm/s - Hydraulic drive: 400 V / 2.2 kW - Required space: approx. W 2580 x D 840 x H min. 230 mm - Weight: approx. 360 kg

Condition: new, Reihansl RSH-3.6 / 600 KZ pump SN: 358-11-95, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cedpfx Aji D Nbfonwerb

Condition: excellent (used), machine/vehicle number: 61 988, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Csdjp H Tkiepfx Anworb

Condition: refurbished (used), Year of construction: 1995, machine/vehicle number: 4290, functionality: fully functional, pressing force: 30 t, stroke length: 300 mm, table width: 440 mm, table length: 320 mm, total height: 2,750 mm, installation height: 500 mm, overhauled Schoen double column press year 1997/2024 Pressing force 300 kN Crsdpfx Aju Hyx Ssnwob Installation height 500 mm stroke: 300 mm Table: W x D 440 x 320 mm Machine will be overhauled: - new control - new light barrier - revision of the hydraulics

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Codpoy Ampdofx Anwsrb Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2690 mm -Swivel range: 270° -Chain hoist: Demag type DCM-PRO 2 250 H2.8 V -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 540 kg Csdjxwt Nwepfx Anwjrb

Condition: good (used), Column jib crane, overhead crane, workstation crane Codpfx Aoxwtw Usnwsrb -Manufacturer: Hans-Hebetechnik, Column jib crane type SSA 125-3.8, lifting capacity 125 kg -Large base plate: 1000 x 1000 mm -Projection: 2,530 mm -Total height: 3,935 mm -Hook height: 2680 mm -Swivel range: 270° -Chain hoist: HADEF type CH1 -Main stroke: 8.0 m/min -Fine stroke: 2.0 m/min -Transport dimensions: 3935/1000/H1000 mm -Empty weight: 550 kg