Used Hidralmac Tuschierpresse for sale (32)

Condition: as good as new (ex-display), Year of construction: 2015, pressing force: 63 t, pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t Iiodpfxoffamqe Abgja :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

Condition: used, Year of construction: 2015, machine/vehicle number: 4273, pressing force: 110 t, pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad Iedpfx Abjd Ap Ugegjia table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressing force: 40 t, pressure:40 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec Ijdpfx Asdxrqxjbgjia dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. Iodpfxohtm E No Abgsia The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec Iijdjin Et Nspfx Abgsa return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V Iedpfefxyirsx Abgeia :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 160 t, pressure:160 t stroke:600 mm Isdpfx Asfxyi Isbgoia total power requirement:7,5 kW weight of the machine ca.:7 t draw back pressure:16 t :1 Stück Column-Diameter:160 mm dayligth:800 mm table surface area:1200 x 800 mm :400 mm table height:850 mm table load:5 t pre-running speed:1 bis 9,8 mm/sec return speed:1 bis 9,8 mm/sec quantity of oil:220 l

Condition: new, Year of construction: 2017, machine/vehicle number: DF0152, pressing force: 80 t, pressure:80 t stroke:500 mm total power requirement:12 kW weight of the machine ca.:5,1 t Controll:Zweihandbedienung cylinder:1 work height max.:800 mm working area:800 x 800 mm Table dimensions:800 x 800 mm pestle plate:2800 x 1300 mm table height:800 mm pre-running speed:9,8 mm/sec work speed:9,8 mm/min return speed:18 mm/sec :700 mm Column-Diameter:75 mm :10 kW main drive:WEG 15 kW pump:REXROTH, Parker elektronische Axialkolbenpumpe kW :25 (bei280bar) t :200 mm :30 mm :80 mm/sek. :REXROTH/Parker :REXROTH/Parker :300 L :ca. 250 L Iiodpfefxyh Hex Abgea :über PLC (Mindestdruck 10 to :zur Ölabkühlung ? mit Elektroventilator :manuell, über Schmiernippel oder Kartuschen :SIEMENS / MOELLER :auf Schwenkarm :automatisch über 2 Handbetrieb mit Schlüsselschalter, manuell über Bedienpult im Einrichtbetrieb :Zweihandbedienung beweglich, :zur Datenübertragung :Siemens für Fernwartung :zur Hublängeneinstellung :0 ? 10 sec. Oil tank capacity:150 l :800 mm lang, vorne und hinten, 300 mm unten diagonal

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec Iedpfxefhcc Re Abgoia :0-25 mm/sec.

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressing force: 500 t, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm Iodpfx Abedyynvjgeia total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Condition: new, Year of construction: 2019, pressing force: 275 t, pressure:275 t distance between columns:3000 mm Iiedpjfxyigofx Abgsa total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: used, pressing force: 30 t, machine/vehicle number: DF0139, pressure:30 t passage width:1000x1000 mm stroke:800 mm total power requirement:3 kW Iedpfx Aofxykhebgeia weight of the machine ca.:5 t dimensions of the machine ca.:3360x1300x1360 mm return capacity:3 t column diameter:75 mm traversing speed:bis 200 mm/sec. :0-10 mm/s :200 mm/sec table height over floor:900 mm distance table - lower edge of ram:1000 mm :126 mm diameter of piston:71 mm

Condition: used, machine/vehicle number: 4396, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. Iodpfxofxyh Aj Abgsia quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: NEBR-4397, pressing force: 15 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! ##### Technical details Pressure 15 t Technology stroke 160 mm Machine weight approx. 330 kg oil tank 10 l robust machine body with solid welded construction, manufactured according to DIN 8651 ##### Additional information low-maintenance and reliable due to robust technology cylinder with induction hardening and chrome plating steel quality: engineering steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 T rotating mandrel attachment, mechanical, with locking, toothed shaft and brake and 220 mm travel hydraulic hand pump with max. 15T pressure and 160 mm travel, with return spring back wall projection to the center of the tool holder 280 mm mounting table swivels 180 degrees to the right with 60 mm bore in the center, M 12 T-slots Clearance height between swivel table and slide/turning mandrel guide 450 mm Passage height up to additional table, insertable, 650 and 800 mm Additional table with center hole, 60 mm, insertable, T-slots M12, size 270x200 mm Height of the base with two inserts for additional table 750 mm on the cylinder a pressure plate, hardened, diameter 10 mm bigger than cylinder in the cylinder head tool holder M 30 Pump lever moves from top to bottom Oil tank for 10 L hydraulic oil AW 46 Painting of the machine body: Blue, RAL 5012, pressure paint Painting of the attachments: Anthracite, RAL 7021 hydraulic single-column combination press as a special machine 15 tons, manual (C-press, hydraulic press, hydraulic press) ##### Are you looking for a custom-fit machine? Contact us for an individual offer. Iedpjfhcc Isfx Abgsia Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, Year of construction: 2017, pressing force: 500 t, pressure:500 t passage width:1300x800 mm stroke:600 mm weight of the machine ca.:18 t dimensions of the machine ca.:2400 x 2400 x 5500 m Iisdpfx Aed E Irmebgsa draw back pressure:50 t Controll:Zweihandbedienung cylinder:1 Stück motor:50 kw Oil Cooling:elektrisch column diameter:200 mm work height max.:700 mm Table dimensions:1900 x 800 mm table height over floor:1000 mm pestle plate:1300 x 800 mm pre-running speed:150 mm/sec work speed:5-10 mm/sec. return speed:150 mm/sec :1500 l quantity of oil:1400 l

Year of construction: 2020, condition: like new (used), pressing force: 150 t, pressure:150 t stroke:500 mm Weight of machine approx.:ca. 8,5 t dimensions:1200x1800x3100 mm Engine Output:10 kW Max Working height:1000 mm Approaching Speed max. :9,9 mm/sec Pressure Speed:100t = 9,9 bis 0 mm/sec Table height above ground level (approx.):1000 mm :Schmiernippel column diameter:230 verchromt mm Return Speed:25 mm/sec :500 l demand for oil:ca 400 l Isdpfxsdxvfio Abgjia Maintenance Balcony:5800 ? :3900 ? :2800 ? :4800 ? :29000 ? :8200 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: new, Year of construction: 2017, pressing force: 150 t, machine/vehicle number: DF0149, pressure:2x 75 / 150 t passage width:2050 x 965 mm stroke:800 mm total power requirement:Hauptmotor 22 kW weight of the machine ca.:6,5 t dimensions of the machine ca.:1500 x 1025 m :150 mm :150 mm :72 mm :2 kW :870 x 350 x 150 mm :1500 x 600 x 150 mm :1500 x 1025 x 75 mm :1500 x 1025 x 150 mm :120 mm :80 mm :350 l demand for oil:320 l :350 mm max. open height:1600 mm Iisdod Aftpspfx Abgea :15-0 mm/sec :100 mm/sec :2050 x 965 mm :6 mm :0,5 mm

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Ijdpfefxygwex Abgjia Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: used, Year of construction: 2021, machine/vehicle number: A2536805, pressing force: 40 t, pressure:40 t stroke:250 mm return capacity:6,3 t Iedpfxjfxyhfe Abgsia motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Year of construction: 2020, condition: reconditioned (used), pressing force: 400 t, machine/vehicle number: DF0317, pressure:400 t passage width:600 mm Iedpod E Irhefx Abgjia stroke:400 mm Weight of machine approx.:14 t dimensions:2380 x 1680 x 3580 mm Engine Output:36 kW Max Working height:750 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec column diameter:230 mm Return Capacity:40 t speed rapid traverse:25 mm/sec Travel:500 mm Oil Tank Capacity:600 l Oil Cooling:1,5 kW :6 m Monitor:WEG 12 Zoll :6800 ? :4200 ? Speed increase to 80 mm/sec.:19000 ? every additional meter conveyor belt:850 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 04.015.00, clearance between the columns: 2,100 mm, table width: 2,000 mm, table length: 2,500 mm, overall weight: 85,000 kg, stroke length: 2,600 mm, pressing force: 200 t, Die spotting press manufactured by Reis is available for sale. This machine originates from the continuous production line of a well-known automotive manufacturer located in Berlin. All maintenance and service intervals have been performed regularly. The system is currently powered up and can be demonstrated in a production environment. Despite its year of manufacture, the machine is in excellent technical condition and has been well maintained. It is particularly suitable for precise spotting and adjustment work in tool and mold making. Inspections are possible at any time by prior appointment. Dismantling and loading are the responsibility of the buyer. Upon request, we can handle dismantling, loading, and transport logistics for an additional charge. Technical specifications of the offered machine: ----- Specifications & Information: Spotting Press TUS 200 OK-200 General Information - Model: TUS 200 OK-200 Ijdpfeylu Sdjx Abgoia - Serial No.: 04.015.00 - Year of manufacture: 05/1989 - Manufacturer: REIS - Overall weight: 85 t Press force - Pressing force: 200 t - Operating pressure: 200 bar - Distance between columns: 2100 × 1500 mm - Installation height (min. distance between table and ram): 2500 mm - Max. ram stroke: 2600 mm Machine body - Arrangement: Vertical - Design: 4 columns Ø 300 mm - Number of hydraulic cylinders: 1 - Cylinder diameter: 360 mm Table - Table size: 2500x2000 mm - Clamping table - Design: Moving platen - Clamping area: 2500 × 2000 mm - T-slots according to DIN: DIN 650 - Number of slots: 6 - Slot width: 28 mm - Slot spacing: 350 / 700 mm - Thickness of clamping plate: 300 mm (Spotting press, try-out press, hydraulic press) ----- Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are built in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements by complying with all aspects of the Brazilian national NR 12 safety standard, which builds upon these. Our main strengths are custom machine engineering and press automation. We offer made-to-order hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: 03.010.00, clearance between the columns: 1,620 mm, table width: 1,600 mm, table length: 1,800 mm, ram plate width: 1,600 mm, ram plate length: 1,800 mm, overall weight: 22,000 kg, stroke length: 1,800 mm, pressing force: 200 t, Try-Out Press with Injection Unit – Manufacturer: Reis – from Automotive Production For sale is a try-out press with integrated injection unit from Reis. The machine comes from the ongoing production of a renowned automotive manufacturer at the Berlin site. All maintenance and service intervals have been carried out regularly. The system is currently under power and can be demonstrated in a production environment. Despite its year of manufacture, the machine is in excellent technical condition and has been well maintained. It is particularly suitable for precise spotting and adjustment work in tool and mould making. Viewing is possible at any time by appointment. Dismantling and loading are the responsibility of the buyer. On request, we can provide dismantling, loading and transport arrangements at additional cost. Below are the technical specifications of the offered machine: ##### Technical Data + Information: TUS 160 OK – 200 ####General Information - Designation: Try-Out Press with Injection Unit TUS 160 OK - 200 - Type: Vertical / Column Type - Manufacturer: REIS - Serial No.: 03.010.00 - Year of manufacture: 1981 - Total weight: 22 t ####Press Force - Press force (Ram): 200 t - Press force (Ejector): 30 t - Operating pressure: 200 bar - Accumulator: No. 05015 ####Machine Body - Design: 4-column / sheet frame - Hydraulic cylinder: 1 - Diameter: Ø 360 mm - Arrangement: vertical, top mounted ####Table - Table size: 1800 x 1600 mm ####Clamping Table T-slots: - Number: 5 - Form: T-slot - Dimensions: 22 DIN 650 - Bolt Ø: M 20 ####Ram Maximum stroke: 1800 mm Retraction force: 70 t ####T-slots: - Number: 5 - Form: T-slot - Dimensions: 22 DIN 650 - Bolt Ø: M 20 ####Ejector Iedpfjyluivsx Abgoia - Ejector stroke: 190 mm (over clamping plate) ####Pump - Power requirement: 22 kW - Flow rate: 122 l/min - Speed: 1450 rpm (Try-Out Press, Spotting Press, Test Injection Press, Hydraulic Press, Hydraulic Press Machine) ##### Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quote. Our hydraulic presses are manufactured in accordance with German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Moreover, our presses exceed Canadian and European safety standards as they fully comply with Brazilian national safety directive NR 12, which builds on these. Our core strength is custom machine building and press automation. We offer bespoke hydraulic presses, press brakes and guillotine shears at surprisingly competitive prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Condition: used, Year of construction: 2005, functionality: fully functional, Spotting Press – Manufacturer: Reis – TUS 130-100 – 26–100 t Spotting Press – Table 1,600 × 1,300 mm For sale is a spotting press from manufacturer Reis, model TUS 130-100, with an adjustable pressing force from 26 to 100 t. This machine features a spacious table area of 1,600 × 1,300 mm, a daylight opening of 1,700 mm, as well as extensive features such as a tilting ram plate and integrated ejector. It is especially suitable for spotting, adjustment, and tryout work in tool and mould making. ===== Technical Data & Information: Spotting Press Reis TUS 130-100 – 26–100 t ==== General Information - Manufacturer: Reis - Model: TUS 130-100 - Drive Type: 4-column spotting press - Pressing force: 26 – 100 t (adjustable) - Machine weight: approx. 17,000 kg - Dimensions (W × D × H): 4,900 × 2,800 × 5,500 mm ==== Working Area - Maximum daylight: 1,700 mm ==== Table and Ram - Table size: 1,600 × 1,300 mm - Max. table load: 12,000 kg - T-slots: DIN 650 – 22 mm ==== Forces - Retraction force: max. 45 t ==== Hydraulics - Hydraulic pump: Rexroth SYDFE2x/071R-PPA.. - Motor power: 15 kW - Operating pressure: max. 200 bar - Pressure accuracy: ± 5 bar - Oil tank volume: approx. 475 l - Hydraulic oil: HLP 36 ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection: 15 kW - Total connected load: approx. 21 kW ==== Control System - Siemens Simatic S7-634 - Operation via control panel - Functions: - Ram up / down - Ram tilting - Table traverse - Ejector control Iijdpfx Ajxd Tv Debgsa - Adjustable press force ==== Features - Tiltable ram plate: 180° (up to 7.5 t tilted) - Ejector in ram: 5.6 t / 160 mm stroke - Stroke extension: +300 mm - Increased speed feature ==== Documentation - Hydraulic schematic - Electrical schematic - Technical drawings - Data sheet ===== Spotting, tool tryout, tool adjustment, mould making, tool making, tryout processes Spotting press, tool tryout press, tryout press, tool adjustment press, tool tryout press, sample press, hydraulic press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are designed and manufactured according to the German Machinery Directive, European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they comply in all points with the Brazilian national safety guideline NR 12, which builds on these requirements. Our greatest strength is special machine construction and press automation. We supply customized hydraulic presses at surprisingly competitive prices. The hydraulics are predominantly equipped with components from leading European manufacturers.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm ==== Working Area - Maximum open height: 1,800 mm - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design Iodpfx Abjtwmp Sogsia ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.

Condition: new, Year of construction: 2025, pressing force: 110 t, Hidrobrasil Spotting Press – 110 t – Tryout Press – Table 1,200 × 1,000 mm Available for sale is a hydraulic spotting press from the manufacturer Hidrobrasil, offering 110 t pressing force and a versatile table and ram system. The machine features a swiveling and tilting table, a rotatable ram, as well as a maximum opening of 1,300 mm, making it especially suitable for spotting, die tuning, and tryout operations in tool and mold making. ==== Technical Data & Information: Spotting Press Hidrobrasil – Tryout Press – 110 t ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Type: Tryout Press / Spotting Press - Pressing Force: 110 t - Machine Weight: approx. 11.5 t - Dimensions (W × H): approx. 2,900 × 3,000 mm Iijdpfxov N D Nco Abgsa ==== Working Area - Maximum Open Height: 1,300 mm - Stroke: 800 mm ==== Table System - Table Size: 1,200 × 1,000 mm - Table extendable: up to 1,000 mm - Table rotatable: 180° - Table tiltable: up to 75° - Table travel speed: 30 mm/sec ==== Tool Mounting - Ram rotatable: up to 180° ==== Speeds - Downstroke speed: 1–10 mm/sec - Upstroke speed: 25 mm/sec ==== Hydraulics - Hydraulic system: Bosch Rexroth ==== Control and Electrics - Control: Siemens S7-1200 - Control cabinet technology: Siemens ==== Features - Manufactured under German supervision in Brazil - CE-compliant design ===== Spotting operations, tool tuning, die tryout, mold making, toolmaking, tryout operations, adjustment processes, flexible tool machining Hydraulic press, spotting press, die trial press, tryout press, production press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are built according to German and European machinery directives (Directive 2006/42/EC), conforming to EC standards and EU safety regulations. Furthermore, our presses surpass Canadian and European safety standards, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these requirements. Our core competence is in custom machine construction and press automation. We supply custom-made hydraulic presses at surprisingly competitive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.