Used Kündig Feeder for sale (2,557)

Condition: used, Year of construction: 1994, Max. pass-through height: 160 mm Abrasive belt length 1st unit: 1900 mm Max. working width: 1350 mm Number of belts: 2 1st unit: - Calibration roller, steel design - Steel, grooved Abrasive belt width 1st unit: 1350 mm 2nd unit: Combined sanding unit Design of 2nd unit: Roller/shoe Control: Manual control panel Elec./pneu. belt oscillation: pneumatic Infeed height: fixed (upper part moves) Table lift: electro-motorized Table display: mechanical numeric display Working or infeed table height: 900 mm Lasdey Exx Nopfx Ak Dsa Location: Nattheim

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts Lodpfxoh Eibas Ak Dsaa For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Lsdpew Rvu Defx Ak Djaa Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), CATALOG NUMBER 5799 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 140 mm - Minimum workpiece length: 300 mm - 2 sanding units: - Top and bottom + platen * Top: - 2 pressure rollers, slip type, metal - Pressure mechanism Laedpfx Akex Rqr Se Dea - Sanding unit: 2 metal rollers + platen - Slip-type pressure roller - Feed belt * Bottom: - Feed belt - 2 metal rollers, slip type, smooth - Pressure mechanism - Sanding unit: 2 metal rollers + platen - 3rd metal roller, slip type, smooth - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Infinitely variable feed speed adjustment via inverter: 3–15 m/min - Feed motors: 2 × 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air requirement: 6–8 bar - Extraction nozzle diameter: 4 × 100 mm - Overall dimensions (L/W/H): 2340 × 1420 × 1920 mm - Weight: 1480 kg – Suitable for short workpieces (belts overlap) – German-manufactured – Very good condition – Not repainted – Used sander Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Laodpfeumpp Eex Ak Dsa Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Spring travel of rollers: 25 mm Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg The console shown in the picture is not included in the scope of delivery! Location: Flörsheim Availability: Immediately

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and fine sanding machine, Kundig Brilliant wide belt sander with electronic segmented pad, tiltable sanding unit, and lacquer sanding function. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior fit-out companies, also suitable for intermediate lacquer sanding. Single belt machine with combination unit and electronic segmented pressure beam. Edge segments can be switched on and off. Segment width of the pressure beam: 22 mm (ideal for intermediate lacquer sanding). Pneumatically adjustable calibration roller—grooved, rubber-coated roller with grit compensation. Drive motor: 11 kW. Infinitely variable cutting speed: 3 - 15 m/s via frequency inverter. Feed belt speed continuously adjustable from approx. 3 to 15 m/min. Workpiece-controlled belt cleaning air blast unit. Lajdpfoyxg N Nsx Ak Dsa Constant table height of approx. 950 mm due to movable machine top—enabling integration into sanding lines. Feed belt still offers excellent traction and is in very good condition. Vacuum conveyor with adjustable vacuum blower for secure holding of even small parts. Maximum sanding width: approx. 1100 mm. Workpiece height: approx. 3.5 to 200 mm. Abrasive belt dimensions: 1120 x 2000 mm. Infeed and outfeed roller tables. Hood interlock. Extraction connection: 1 x 180 mm, 1 x 125 mm. Terminal control with 45 programmable sanding programs for automatic machine operation. Parameters: belt speed, feed speed, workpiece height, belt cleaning nozzle, vacuum blower, calibration roller adjustment, and segmented pad parameters. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness setting via feed activation—eliminating the need for constant caliper measurements. Programs for various sanding tasks can be stored and selected via smartselect. CE mark Operating manual Two sanding cassettes included The four bellows have been renewed Without the illustrated connection cable Original paintwork, only minor touch-ups Very good condition, from a small company Machine has approx. 1,395 operating hours, about 2 hours per week Dimensions: approx. 1900 x 1650 x 2150 mm (LxWxH) Weight: approx. 2,300 kg Includes large mobile storage table at belt conveyor height for sanding belt storage Table size: approx. 1520 x 1360 x 950 mm Includes various sanding belts from K80 to K400 The machine can be demonstrated by appointment at our premises. We only offer machines ready for demonstration in our warehouse—see "other offers from this supplier".

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Laodpfx Aol Axtgok Doa Item for sale: 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Condition: used, Kündig ENORM PRIMO – TOP CONSTANT TABLE MACHINE / automatic head positioning Wide-belt calibrating and fine sanding machine Combination unit: contact roller and pneumatic sanding pad unit Enormatic Digital thickness display for workpiece height Lasdpfeyyltcex Ak Doa Belt drive motor power approx. 9 kW Contact roller level continuously adjustable via grit scale Infeed and outfeed table with roller support Working width 1100 mm Feed speed 2.5 - 15 m/min Machine will be PROFESSIONALLY REFURBISHED Available from stock Lieboch

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 Ledpfx Akeyuuc Io Dsaa Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Lsdpfsw Naansx Ak Djaa Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: ready for operation (used), Year of construction: 2015, Belt sander manufactured in 2015. This Kundig Premium-1 1100K features a supply voltage of 400 V/AC and a control voltage of 24 V/DC. It operates at a current of 24.90 A and has a power rating of 12.62 kW. If you are looking to get high-quality sanding capabilities, consider the Kundig Premium-1 1100K machine we have for sale. Contact us for further details. • Supply voltage: 400 V AC • Control voltage: 24 V DC Lsdsyt Rlpopfx Ak Doaa • Current: 24.90 A • Power rating: 12.62 kW • Frequency: 50 Hz

Condition: new, functionality: fully functional, power: 22 kW (29.91 HP), fuel type: electric, color: other, Year of construction: 2026, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm Lasdpfsy A En Eex Ak Doa • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,551 h, total width: 1,790 mm, total height: 2,150 mm, overall weight: 2,300 kg, product length (max.): 1,690 mm, This Kundig Premium-2 1350-RG belt sander was manufactured in 2018. It features a steel roller and a rubber roller, complemented by a belt release system. Accessories include two 3-meter roller conveyors, remaining sanding belts, V-belts, and various small parts. Consider the opportunity to buy this Kundig Premium-2 1350-RG belt sander. Contact us for more information about this machine. Additional equipment • Steel roller • Rubber roller with a device for a needle roller (unused) • Belt release Machine Benefits Technical Machine Benefits • Two roller conveyors, each 3 meters long • Sanding belts (remaining quantity unspecified) • V-belts • Various small parts • Premium 2 1350 RP/RE and RE-L • Sanding belt motor RP/RE: 15 kW • Feed motor frequency-controlled RP/RE: 1.5 kW • Height adjustment motor RP/RE: 0.75 kW • Vacuum motor frequency-controlled RE-L: 2.2 kW • Total connected load RP/RE: 17 kW • Total connected load RE-L: 30 kW • Operating voltage RP/RE: 400 V • Maximum current consumption RP/RE: 36 A • Maximum current consumption RE-L: 56 A • Required slow-blow fuse minimum RP/RE: 40 A • Required slow-blow fuse minimum RE-L: 63 A • Cable cross-section reduced load RP/RE: 5x6 mm² • Cable cross-section reduced load RE-L: 5x10 mm² • Cable cross-section correct dimensioning RP/RE: 5x6 mm² • Cable cross-section correct dimensioning RE-L: 5x10 mm² • Extraction connection for 1st unit diameter RP/RE: 180 mm • Extraction connection for 1st unit diameter RE-L: 180 mm • Extraction connection for 2nd unit diameter RE-L: 180 mm • Extraction connection for belt blow-off diameter RE-L: 150 mm • Required total extraction connection diameter RP/RE: 200 mm • Required total extraction connection diameter RE-L: 300 mm • Air velocity at extraction openings RP/RE: 22 m/s • Total air volume for dust extraction RP/RE: 2000 m³/h • Total air volume for dust extraction RE-L: 5400 m³/h • Negative pressure RP/RE: 880 Pa • Compressed air for belt tensioning and oscillation RP/RE: 2.5 Nm³/h • Compressed air for belt or workpiece blow-off per unit RE-L: 130 Nm³/h • Operating pressure RP/RE: 7 bar • Sanding belt length (all units) RP/RE: 2000 mm • Sanding belt width (all units) RP/RE: 1350 mm • Maximum workpiece width RP/RE: 1350 mm • Minimum workpiece thickness RP/RE: 4 mm • Maximum workpiece passage height RP/RE: 200 mm • Working height including machine base RP/RE: 910 mm • Feed speed range RP/RE: 3–15 m/min Ljdpfx Asx D E I Ejk Doaa • Total machine length RP/RE: 1690 mm • Total machine length RE-L: 1850 mm • Total machine width RP/RE: 1790 mm • Machine height including base and extraction outlet RP/RE: 1950 mm • Maximum machine height including base and extraction outlet RP/RE: 2150 mm • Net weight approx. RP/RE: 2300 kg Extra Information Machine still under power

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW Lajdpfoyttyvjx Ak Dja EQUIPMENT Working table with fixed height Working level Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Laedsxqf Sdopfx Ak Dea Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? Laodsxqcn Aspfx Ak Dsa CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Working width ca. 1.300 mm mm Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts. Laedpfx Akoypwaro Doa

Condition: excellent (used), Year of construction: 2003, Feeder Caps 8006 automatic disc feeder, sorting machine Fully automated, variable dosing speed, manual height adjustment. Stainless. Year of production: 2003 Power: 0.55kW Lasdpog Rkwmsfx Ak Dsa max. dosing capacity: approx. 1000 pcs / min Diameter: 1400mm Siemens control. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) Lajdpfxek Dpp Ss Ak Dea C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Laedpfx Aksvphzpj Dea Format: 360 420 mm Equipment: AUTOMATIC ENVELOPE FEEDER (with vacuum suction) SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR MIN ENVELOPE SIZE: 7.6 x 12.7 CM MAX ENVELOPE SIZE: 36 x 42 CM

Year of construction: 2005, condition: excellent (used), diameter: 1700mm Stainless steel Lodjfd E R Ajpfx Ak Djaa

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Ledpfx Akex Rv Dys Deaa Oscillation stroke: 5 mm Work table: 400 x 1100 mm Sanding belt width: 150 mm Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Kündig edge sanding machine Uniq-S Edition 30 Top condition - available immediately - - Complete sanding unit can be tilted up to 45 degrees by motor without any table adjustment - Feed system integrated in the machine carrier, transport belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 KW, speed infinitely variable 3 - 15 m/min - Can be operated from both sides with flat and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 KW, 380 V, 50 Hz - Oscillation stroke programmable 10 - 90 mm - CE compliant/dust tested Standard version Kündig Uniq - S Laodpfx Ajvk R Arek Dsa Accessories: - Q4 auxiliary table belt drive roller - Q6 semi-circular table belt drive roller - Z04 table extension Location: from stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, The Uniq series is the full-fledged basis of our range and shares all the features that have helped the Kündig edge sanding machine gain its reputation on the market as a robust, versatile precision instrument. Part of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90mm and the possibility of motorized tilting by up to 45°. All the usual edge processing operations can be carried out at the up to four grinding stations. Edge sanding machine Kündig Uniq front and rear side Ingenious design - the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a whole range of intelligent functions and features. For example, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation travel, sanding belts can be used optimally over their entire width, without the need for laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The sanding unit can also be tilted conveniently by means of a rotary switch and also with the aid of a separate motor. The unit can be tilted between 90° and 45°. Thanks to the sophisticated swivel mechanism Lasdpfx Aksfig Rws Dsa

Condition: new, Year of construction: 2025, Edge sanding machine with overhead feed unit What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table with rubberized feed belt and overhead pressure beam. It significantly facilitates the grinding and production of beveled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it is also an aid when machining exceptionally large or small parts. The feed speed is infinitely variable between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the top pressure beam gently convey the material. A second bottom conveyor belt is available as an option. The top pressure rollers can also be replaced by a rubber belt, which helps especially when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all processing - from solid wood to fine veneer edges in high quality. The infinitely variable feed speed allows optimum adaptation to the material. 1st sanding station: "veneer side 2nd sanding station: "solid wood side 3rd sanding station: "Additional table Ljdohqb Rcspfx Ak Djaa 4th sanding station: "Semi-circular table Location: Ex stock 54634 Bitburg - immediately available -