Edge sanding machine Kündig Basiq

Kündig Basiq

Condition: used, Year of construction: 1977, functionality: fully functional, VOLLMER CANA-E sharpening machines 9- CANA-E 1977 €4,900 10- CANA-E 1977 €4,900 11- CANA-E 1970 €3,900 Bodpfx Akex Spydjxjwl

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Bwjdpfx Aexhg Ibskxol Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Belt dimensions: 2600 × 200 mm - Work table: 935 × 460 mm - Auxiliary table at the belt tensioning roller: 350 × 350 mm (with contour sanding attachment) - Sanding mandrel with rubber drums, supplied with sanding sleeves in diameters of 30, 40, 50, and 60 mm - Oscillation (can be switched on/off), electromechanical with a separate, maintenance-free oscillation motor - Table height adjustment with handwheel, also adjustable relative to the sanding belt (front and back) - Sanding unit tiltable from -10° to 90°, tilting via handwheel with digital inclination display - Accurate angle precision via mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller feed and veneer mechanism - Fast conversion from veneer to solid wood sanding - Height-adjustable idle roller table with adapter for dust extraction for sanding at the belt tensioning roller - Large mitre gauge with infinitely variable angle adjustment and movable ruler - Dust extraction: adapters Ø 100 mm on both sides (idle roller table, right and left extraction hood) - 2 power sockets 400 V on the machine stand (for machine and feed unit) - Torsion-resistant, heavy-duty steel frame for high running smoothness and stability - Large work table with sliding surface - Recess in the machine stand for pallet truck – facilitates internal transport Bjdpfsxwz I Ijx Akxowl Dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Bsdextgz Ejpfx Akxjwl Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: used, Year of construction: 1987, Wide belt sander Manufacturer: Samco Model: EG Year of manufacture: 1987 Sanding length: 3,000 mm Includes spare belts Bsdpfx Akoxdnrgjxewl ä16426

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, Schmalz vacuum lifter for heavy panels with new suction rubber Load capacity 150kg horizontal and vertical Suction pad is motor-driven and swivels 90 degrees Suction box 1000 x 675mm Acoustic warning signal in case of low vacuum 400V, 1.5kW Can be attached to an on-site chain hoist Bwodsv S Synspfx Akxol CE marking No inspection book available Suction rubber renewed Like-new condition The machine can be demonstrated at our facility by appointment. We only offer machines that are in stock and ready for demonstration – see "more offers from this supplier".

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. Bjdpfx Akow Tfx Dexowl - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x745x1100 mm Bedpfx Akovz Emyexjwl Weight 580 kg Total power requirement 4 kw

Year of construction: 2026, condition: new, ProfiStop Lazer is a simple, no frills saw measurement solution for light-duty industrial applications. High speed, high accuracy cutting production cut, after cut, after cut. • Fast and high-accuracy automatic servo motor cut measuring • Simple to use and setup, compatible with most saws / drills • Light duty 10-20 kg recommended material weight • Ideal for aluminium, softwood or light steel • Automated and streamlined jobs management • Label printing and bar-code / QR code jobs input (optional) • Jobbing integration to your ERP system (optional) Available lengths: 1.5 m, 3 m, 4.5 m, 6 m, 7.5 m, 9 m. Highly suitable for: • Kitchens and wardrobes manufacture Bwodpfx Akof Dp Nqexjl • Stairs and banisters manufacture • Furniture manufacture • Windows and doors manufacture • Woodcraft manufacture Can be used with all your existing saws including: • Mitre drop saws • Industrial drop saws • Guarded up-cut saws • Radial arm saws • Drills and presses Model: ProfiStop Lazer Length: 3 m Stroke: 2674 mm Pushing capacity: 10-20 kg Software: Optimiser Supplied with a roller table or as a linear unit only for installation to your existing tables. The quoted price is excluding the table. QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, functionality: fully functional, total height: 1,350 mm, total length: 570 mm, total width: 700 mm, overall weight: 160 kg, Tool grinding machine with tool holders in working condition. Bwsdpfsx Trr Eex Akxel