Used Koch-Technik Chamber Dryer for sale (10,409)

Year of construction: 2004, condition: used, voltage 230 V The granule dosing unit is, in our assessment, in good used condition. Two units are available. Price per unit. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Nljdpfxey Erzwj Akqsa

Condition: used, Year of construction: 2018, functionality: fully functional, The dry air dryer from Koch is up for sale. Below are some technical details: - Designed for 135 kg/h for 7 machines - NEW PRICE of the system: €115,000 Model: CKT 500F, frequency-controlled version Nsdpjy Amr Ejfx Akqjla - 500 cubic meters/hour dry air - Touch panel control expansion for CKT/EKO dryers - Control system expansion integrated as a conveying system in CKT/EKO dryers, up to 16 points of demand - Containers: 1 x 200 liters; 4 x 150 liters; 2 x 60 liters, with cleaning door - Koch hopper heaters at 3 kW, 5 units - Koch hopper heater at 1.5 kW, 2 units - V2A extraction containers, 7 units - Stationary frames, 2 units - Economy system control for gentle material drying and maximum energy savings - Empty suction valves NW 40, double empty suction, 7 units - And much more...

Condition: excellent (used), functionality: fully functional, 5 Koch conveyor separators from a cleanroom production. Only PP without glass fibers was processed! The devices are in like-new condition. One device with an additional vacuum discharge valve. 4 machine hoppers. The original price was approximately €14,500. The price is for one unit. Nedpoxdfxwjfx Akqjla

Condition: like new (used), functionality: fully functional, Of the total 24 material containers, 8 units are currently still available. All containers are offered without material conveying devices. Only 4 units feature an extraction box beneath the container. External dimensions are 120 x 120 x 200 cm (length x width x height). Nlsdpewpp Ebofx Akqea Capacity is approx. 1,250 litres. The containers are in very good condition and originate from a cleanroom production environment where only PP material was processed.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The mobile dry air dryer of type KKT dries hygroscopic granulates directly next to your processing machine, and is also equipped with a TYPE 608 conveying unit. The saturated dry air flows through two alternating desiccant containers, where it is re-dried. This creates ultra-dry air with a dew point of approx. -35 °C. Dry air dryer: KKT 100S Dry air flow rate: 100 m³/h Desiccant containers: both NEW Container volume: 200 liters Mobile design Convenient touchscreen menu navigation Conveying unit: TYPE 608 Nedpsyxay Iefx Akqola Number of material types: 1 Blower: 1.1 kW Capacity: 8.5 liters Voltage: 230/50

Condition: excellent (used), Förder Geräte Koch, 1.200 W Nodpfx Aswrpryokqola

Condition: used, functionality: fully functional, For sale are 2 Koch CKT 1500 drying plants. One unit from 1999 with 4 drying containers (3x800l/1x1200l), and one unit from 2003 with drying containers (3x100l, 3x200l, 3x300l, 1x400l). The dryers are fully functional and still in operation, and can be inspected until mid-September. Sale is complete with piping, without Koch conveying technology. Price upon request. Nsdpjw Ry Axsfx Akqsla

Condition: good (used), Year of construction: 2018, Beelonia Trockenschrank TF5 Drying Cabinet Type - 11522 Nodpfoyziknsx Akqela 2018, stainless drying cabinet, generates an even air flow ensuring good drying, with stainless trolley and mesh trays 900mm x 760mm trays, adjustable temperature and timer settings, with ramp, 3Ph

Condition: excellent (used), Year of construction: 1983, Longitudinal Flow Dryer – Heating via Electricity or Hot Water Internal chamber length approx. 4500 mm Internal chamber width approx. 750 mm Internal chamber height approx. 600 mm Chamber volume 2.0 m³ Top loading – trunk design Manual / fully automatic control Electronic controller type C Longitudinal ventilation Number of fans: 1 Fan motor power 0.55 kW, 400 V, 50 Hz Electric heater: 4.2 kW INCLUDES: Aluminum stacking strips Wood moisture measuring probe Operating manual, electrical diagram, etc. Space requirement approx. 5600 mm x 1200 mm x 1600 mm Weight: 400 kg Note on used machinery: Nedpfx Akey Emqgjqela • Technical data subject to errors and prior sale. • Quoted prices are ex-location – free loading! • Machines have been cleaned and function tested. • All machines are bought as inspected, without any warranty claims. Buyers are free to inspect the machines on site. • Special agreements only valid in written form. (We will respond to inquiries only if your address and telephone number are provided!)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 5,400 mm, inner dimension width: 750 mm, inner dimension height: 850 mm, total length: 6,500 mm, total width: 950 mm, total height: 1,500 mm, number of chambers: 1, control type: PLC-controlled, fuel type: electric, We are offering this very well-maintained Lauber longitudinal flow dryer type 2 S6 chamber dryer, year of manufacture 2022. Type/Plant No.: 2 S-6 / 44217 Rated voltage: 3pH AC 400/230 V 50 Hz Fan motor rated power: 1.1 or 0.75 kW Fan motor rated current: 7.1 A Electric heater rated power: 7.5 kW Total rated power: approx. 15 kW Nljdoy Hdmnspfx Akqja Total rated current: 25 A Pre-fuse (slow-blow): 25 A Control voltage: 24 V DC Wiring diagram no.: SP361 RV Year of manufacture: 2022 Technical details: A double-shell thermal insulation of the wood dryer guarantees excellent insulation properties. The inner wall cladding is made from 1.5 mm thick, seawater-resistant special aluminium and is tightly welded. The outer cladding consists of stucco trapezoidal and stucco smooth sheet metal. The thermally insulated floor is designed as a tightly welded stainless steel tray and is permanently resistant to aggressive wood substances. The wood dryer should be installed on a stable, level surface; no special continuous foundation is required! A front door with a wide opening angle and all-round rubber seal ensures convenient operation and high steam tightness. An aluminium trolley for side loading and unloading, along with interior rails and removable exterior rails, enables comfortable and space-saving loading. Efficient and uniform longitudinal ventilation of the wood stack is ensured by a powerful radial fan (0.55 kW) mounted on the end face. The chamber is heated by electric heating rods with a heating capacity of 6.0 kW. Excess moisture is extracted via servo-controlled 100 mm intake and exhaust dampers. Chamber humidity can be increased if necessary by cold water atomization. 140 straight aluminum stacking battens are included in the delivery. The standard PLC control (SPS) regulates the drying process fully automatically and, thanks to a 7'' color touch panel, offers user-friendly operation. Simply enter three parameters: 1. Wood species 2. Lumber thickness 3. Desired final moisture content Based on this data, the system optimally controls the drying process, allowing you to obtain your wood in the desired quality in a short time. The standard control equipment includes: - 3 pcs. wood moisture measuring points with drive-in electrodes and sensor cables - 1 pc. wood equilibrium moisture measuring point - 1 pc. air temperature sensor We supply the Lauber wood dryer fully assembled and ready for connection! Detailed operating instructions, drying recommendations, as well as installation and loading instructions are included. Original price: EUR 31,120 plus VAT Previous lead time: 15 months The dryer has been used for around 30 drying cycles and is in very good condition. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2003, inner dimension length: 7,400 mm, inner dimension width: 4,500 mm, inner dimension height: 4,250 mm, number of chambers: 1, Equipment: CE marking, documentation/manual, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measuring points With frequency inverter With control system Heating capacity: 223 kW Water temperature: 85 °C Water flow rate: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control system: MB Intellevent 5000 program Nlsdpfxjy Evkps Akqoa The unit was previously connected to a central heating system. Central heating system not included! Drying chamber will be professionally dismantled and loaded onto a truck.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. Nsdpfx Aotqlp Rokqela an exhaust air flap. The vacuum pump is used for rapid dehumidification.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Nlodpetqlqaefx Akqsa

Condition: good (used), power: 120 kW (163.15 HP), control type: PLC-controlled, For Sale: Complete 120 kW Industrial Pellet/Bio-Heating Container A powerful and turnkey heating solution. This package combines a high-capacity boiler with a professional 95–120 kW EcoTec B3 burner system, all pre-installed in a weatherproof container. Ideal for farms, large properties, or industrial facilities. Technical Specifications (Model 120) Designed for heavy-duty operation with the following features: Boiler & Performance - Nominal Output: 120 kW - Burner: EcoTec B3 (95 kW nominal / compatible with 120 kW boiler) - Dry Weight: 1030 kg - Water Capacity: 450 l - Max Operating Pressure: 1.5 bar - Max Operating Temperature: 110°C - Material Thickness: 6 mm (fire surfaces and water jacket) Physical Dimensions - External Dimensions: 1485 mm (Depth) x 930 mm (Width) x 1410 mm (Height) - Firebox Size: 650 x 650 x 1030 mm (Volume: 480 l) - Container: Approx. 10 ft, blue, including chimney stack and external fuel loading port Fuel & Chimney Requirements - Fuel: Wood pellets / biofuel (compatible with underfeed firing technology) - Chimney Outlet: 1060 mm from floor, 160 x 220 mm flue size - Chimney Recommendations: - Fuel with moisture < 20%: Ø 220 mm / 8 m height - Fuel with moisture > 20%: Ø 250 mm / 10 m height Key Features - Turnkey Solution: No boiler room required. 10 ft container is fully preinstalled and “plug-and-play” – simply connect to your heating system and supply power. - Professional Automation: Fitted with a Unitronics Vision230™ PLC controller and an intuitive control panel (main switch, pump control, fault reset, and emergency stop). - Robust Construction: Heavy-duty Swedish engineering by Sahlins EcoTec AB (2007). 6 mm steel ensures a long operational life. - Large Fuel Silo: Integrated, internal V-shaped bunker with heavy-duty feed auger for extended autonomous operation. - Connections: 50 NS flow/return and expansion, 20 NS thermostat, and 2x 50 NS electric heater connections. Sales Information - Condition: Meticulously maintained, complete working unit. Nledpfsy Eipfsx Akqea This is a unique opportunity to acquire a high-output, mobile heating plant at a fraction of the price of a new system.

Condition: used, Year of construction: 1993, machine/vehicle number: 2.4836.93, functionality: unexamined, input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: AC, temperature: 80 °C, number of chambers: 1, Equipment: documentation/manual, We offer a vacuum dryer. This system can dry 4.8–5.5 m³ of wood. The unit is in good condition and can be inspected by appointment. Nodpfx Ajy En Iyjkqsla

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: GSVW-3080-1250-1-F, functionality: fully functional, Cross-flow vacuum dryer with 31.68 m³ capacity The chamber holds 1 package in width at 1.20 m, 3 packages in height at 0.80 m with 0.10 m thick spacer timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net of approx. 19 m³ of trimmed timber with a wood thickness of 50 mm and a stacking stick thickness of 24 mm. Usable space: width 1.20 m, height 2.70 m, length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick resin-bonded rock wool insulation and a ventilated external aluminum trapezoidal sheet cladding. - A vacuum door with special lock for easy end-side loading with walk-on trolley. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). - For air flow through the stacks, 12 fans with 1.5 kW rated power each in delta configuration. The average power consumption in vacuum is only about 0.5 kW per fan. - Hot water heat exchanger for max. 98 kW at 90°C supply temperature installed - The electrical connection is 47 amperes at 3 x 400 V / 50 Hz. - Excess moisture is condensed out via air heat exchangers. - The chamber climate can be humidified as needed using a hot water heated evaporation basin. Njdpfx Akswrb Nksqela - The chamber dries fully automatically. Only the wood type, wood thickness, and desired final moisture need to be entered. - Control MB4000 V including control panel - 10 wood moisture measuring points as well as climate and temperature sensors - Run-out rails must be re-ordered, as these are concreted in. The price is ex works and must be paid net before dismantling the plant. The plant must be dismantled or removed by the buyer. Dismantling is not included in the price.

Condition: used, Year of construction: 2005, inner dimension length: 14,000 mm, inner dimension width: 1,250 mm, inner dimension height: 1,850 mm, total length: 15,900 mm, total width: 2,500 mm, total height: 3,000 mm, overall weight: 12,000 kg, Equipment: CE marking, No. 3262 Vacuum dryer / drying chamber Kronseder KCT 2400 Used, year of construction 2005 The machine was in operation until 2024 and remains connected to electricity and hot water until July 2026 Capacity approx. 32 m3 Heating via hot water Stainless steel chamber Chamber diameter approx. 2000 mm External length of chamber approx. 15000 mm Internal length of chamber approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm LWH Weight approx. 12000 kg Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Nodpfx Akeyy R D Tjqela Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 1995, machine/vehicle number: 15809, functionality: not functional, Vacuum Dryer / Drying Chamber DWT / IWT MD 2600 x 15000 Used Compact System The machine is still connected to power and heating but has not been in use for the past 6 months. *PLC control renewed in 2014* *Vacuum pump defective* Dryer diameter: 2600 mm Dryer length: 15000 mm Nsdpfxoy Aawno Akqsla Package length: 15000 mm Package width: 1200 mm Package height: 2100 mm Gross capacity: 38 m3 Net capacity: 25 m3 of sawn timber or 18 m3 of log wood Electrical connection: 50 kW Power consumption: 18 kWh Drain: 50 mm Water connection: 25 mm Heat connection: 87 kW, 85 °C hot water at the dryer Heat consumption: 500 kcal per liter moisture or 0.6 kW per liter moisture Including heating boiler operated with heating oil (*approx. 15-20 years out of service*) Hydraulic, fully automatic boiler closure Boiler material: solid stainless steel according to DIN, x5 Cr Ni 189 150 mm insulation, sheathed with 1 mm galvanized steel sheet 1 rail bridge in front of the boiler 5 trolleys for loading and unloading, each approx. 3000 mm long 15 fans with Siemens motors Heating register as stainless steel finned tubes with aluminum fins, approx. 180 m long, surface area 280 m2, diameter 25 mm Supply and return pipes, diameter 80 mm Heating medium: 85 °C hot water at the user Circulation pump capacity: 75 m3/h 3 fans for steam condensation Rails in front of the dryer: 16000 x 600 mm The entire system stands on a concrete foundation and can be lifted and loaded as a single unit with a crane. Dimensions for transport: approx. 21000 mm long, 3050 mm high (without cooling system) Sale from location 52146 Würselen, without dismantling, without transport and installation. Dismantling, loading, and transport by us optionally available. Subject to error in description and price. To avoid possible misunderstandings, inspection on site by appointment is possible and recommended. Sale as is.

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Nlsdpfxeua D U Ij Akqsa Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Our client in Vilnius, Lithuania currently offers 7 complete sets of drying trolleys with trays available from stock. Can be sent one set at a time. Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. Nodpferftxfex Akqsla The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Year of construction: 1996, condition: ready for operation (used), functionality: unexamined, operating temperature: 250 °C, heating capacity: 36 kW (48.95 HP), usable tank capacity: 4,500 l, machine/vehicle number: 603928, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum drying temperature: 250 °C Usable volume: 4.5 m³ Nsdpfx Aoyxc I Ijkqjla MACHINE DETAILS Type of heating: electric Dimensions (LxWxH): 200 x 150 x 150 cm Electrical Data Rated voltage: 400/230 V 50 Hz Connected load: 40 kVA Heating capacity: 36 kW Rated current/fuse: 58 A/63 A Protection class: IP 43 Exhaust air flow at 20°C with dampers open: 376 m³/h Exhaust air flow at 20°C with dampers closed: 133 m³/h

Condition: new, No. 3183 Vacuum dryer / drying chamber ISVE ES 3 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1300 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 790 mm Net wood volume: approx. 2,5 m3 Installed electrical power: 8,80 kW Average hourly power input: 4,4 kW/h Includes: - 9 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (65 m3/h / 1,8 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 internal condensers (turbofan of 0,37 kW each 380 VCa) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) Nledpfxju Tipks Akqea - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1300 x 2000 mm LWH Weight approx. 2000 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Nedpevc Axpefx Akqsla Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Nedpfogm Hwuex Akqjla Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2004, condition: used, Koch dryair tanks 1x100 L 1x200 L 1x400 L with auxiliary heating Regulator Nljdpsxltdwofx Akqoa Art.-Nr.: 2294 year: 2004 price: 7.400.00 contact: Mr. Rainer Eckerle