Chamber dryer

Brunner Hildebrand BTV 5

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied Lrsdpfx Aljv Si Sze Tjn 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1995, functionality: fully functional, total length: 36,000 mm, Ironing dryer, working width 4,600 mm, length 22,000 mm, of which 10,000 mm with press rollers, separate press cooling field, hot water heating medium, semi-automatic feeding device, type BFT46 and lifting platform, max. veneer length: 4,600 mm, roll width 600 mm, total length: 36,000 mm, 11 fans, PLC control renewed in 2017 A second ironing dryer of a similar design is available. Lrsdev Hygfepfx Al Ton

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ Ledotutwvepfx Al Tjrn -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Lredpfxowxdqke Al Tjn Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 Lrsdpfjpu Anmjx Al Tsn - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Lredpjw I E Dvefx Al Tjn

Condition: good (used), Obel Pedersen High-frequency continuous belt press Opel-Pedersen press, type 2412 Press length 2500 mm, width 600 mm with glue application system, stacking table, HF generator T20 V and water cooling Ledpfxedybr Ro Al Tsrn System has been dismantled.

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Ledpfx Alshbp Ife Tsrn Dimension : 2,12m x 0,73m x 1,55m

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Lodpfx Alsxgdrbe Tern

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Blockhouse milling machine BL100A, completely overhauled with factory warranty Ljdpfx Aoxxhwlol Tsrn For log thickness up to 140mm, construction height up to 200mm, machining length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Blockhouse milling machine BL100A – 4-side milling machine with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide insert tools for wall thickness approx. 40 – 100mm included • End groove milling unit 3.0kW with cutter B=21-40mm • Drilling device with drill guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, saw blade D=500mm • Workpiece clamping pneumatic, with horizontal clamping jaws • Outfeed table 9m with pusher device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO control software • Label printer for component marking, laser printer for production list printouts • Excellent condition, factory-refurbished and fully serviced, with parts warranty, ready for operation • Price & delivery time on request. Subject to prior sale and all rights reserved