Used Micro-Step Mastercut Eco A Plus for sale (72,682)

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, sheet thickness (max.): 38 mm, overall weight: 3,500 kg, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Cutting range for steel: 1–38 mm X-axis travel: 3,000 mm Y-axis travel: 1,500 mm MACHINE DETAILS Cutting medium: HiFocus 161i Rjdpfox I Ehpjx Akxst Control system: MicroStep Total power requirement: 6 kA Machine weight: approx. 3,500 kg EQUIPMENT Kjellberg plasma power source HiFocus Plus 161i

Condition: used, Year of construction: 2016, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Eco (A) Plus Year of manufacture: 2016 CNC control Working area: 1,500 x 3,000 mm 1 x plasma with Kjellberg HiFocus 161i power source Prepared for retrofitting of an oxy-fuel torch Filtration unit Kemper System 8000 with pre-separator Nesting software Asper Basic on the CNC control Rjdpfxoy Auxme Akxet ä16426

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Redpfxeyzy S Aj Akxjt Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Rsdpfx Ajytqmmokxst Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter unit for outdoor installation 1 x nesting software on the machine control Availability: immediately

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Redjxnmbnspfx Akxjt Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Filter unit TEKA Ref. ä16426

Condition: good (used), Year of construction: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of Manufacture: 2011 CNC Control: iMSNC with integrated network card Working Area: 2,000 x 9,000 mm Exhaust table 1 Oxy-fuel torch Cutting thickness up to 150 mm 1 Plasma marking unit Kjellberg Laser pointer Technical details: 1x Oxy-fuel torch (fully automatic) 1x Plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network interface LCD operator panels on the gantry Laser pointer with automatic offset transmission iMSNC control parameter database / Windows® Programming system "AsperWin-Basic" for direct programming at the machine control Macro library module "AsperWin Select" NC simulator module "AsperWin NC-Sim" "Plasma marking" module (for scribing) via plasma source "THC" / Automatic height control via arc voltage USB2.0 connectivity for storage media Remote diagnostics module MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Power cables Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 set capacitive height control IHT / for oxy-fuel 1 set electric ignition unit RHÖNA-Acetylene Double-sided cable safety (collision protection) for gantry bridge via emergency stop Rjdpfjudn Rzox Akxet Kjellberg® Plasma marker unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integration into CNC control Module for automatic control of marking device

Year of construction: 2023, condition: ready for operation (used), A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025. Redpfx Aswn H Udjkxst

Condition: used, maximum load weight: 28,570 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2013, next inspection (TÜV): 08/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2013, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, disc brakes Body interior/exterior: * Sliding curtain left & right * Fast tensioners at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,780 mm * Perforated outer frame (Multilock) * Pallet stop right * Phenolic plywood floor for forklift axle load of 7,100 kg * 9.0 m coil well * Swedish stanchions * 3 pairs of sliding stanchions, movable * Rear portal doors with double locks Rsdpfx Akey Aqriexst * Access ladder * Tool box * Reversing lights * Rear fog lamp Chassis / other equipment: BPW Eco Plus axles * 430 mm disc brakes * Air suspension * Raise and lower * ABS, EBS * Spare wheel holder * Tyres 385/65 R 22.5 * Remaining tread approx. 2 - 16 mm --- Non-binding offer from location Bocholt, subject to prior sale and errors excepted. Sale to businesses or for export only.

Condition: used, maximum load weight: 29,450 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2015, next inspection (TÜV): 04/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2015, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 223,613 km Rjdpfx Ajym H I Hokxst Body interior / exterior: * Sliding curtain on left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated outer frame (Multilock) * Pallet stops on left and right * Screen-printed floor for 7,100 kg forklift axle load * 23 aluminum insert slats * 3 pairs of sliding rings, adjustable * Rear portal doors with double locks * Access ladder * Storage box * Reversing lights * Rear fog lamp Chassis / other equipment: BPW Eco Plus axles * Air suspension * Raise and lower function * ABS, EBS * 385/65 R 22.5 tires * Remaining tread approx. 5 - 15 mm ---- Non-binding offer from Bocholt location. Subject to prior sale and errors. Sale only to traders or for export.

Condition: used, maximum load weight: 29,510 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2016, next inspection (TÜV): 10/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, SDP 27, LASI EN 12642 Code XL, 349,026 km Body interior / exterior: * Sliding curtain left and right * Quick-release fastener at front * Sliding roof * Load securing certificate EN 12642 Code XL * Internal height approx. 2,730 mm * Perforated external frame (Multilock) * Pallet stop left and right Rjdpjym H I Tsfx Akxjt * Anti-slip phenolic plywood floor suitable for forklift axle load up to 7,100 kg * 36 aluminum insert slats * 3 pairs of sliding rings, adjustable * Rear portal doors with double locks * Access ladder * Toolbox * Reversing lights * Rear fog light Chassis / additional equipment: BPW Eco Plus axles * Air suspension * Height adjustment (raise and lower) * ABS, EBS * Tires 385/65 R 22.5 * Remaining tread approx. 7 - 14 mm ---- Non-binding offer from location Bocholt, subject to prior sale and errors. Sale only to commercial customers or for export.

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 Rsdpfeby Stpex Akxet - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: used, This listing is for the MSE MSB010 Micro Centaur Plus Centrifuge Rsdpjxhfy Ajfx Akxet The unit is in full working condition and is ready for immediate use Overview & Applications Designed for in vitro diagnostic (IVD) use and routine medical analysis, supporting separations of mixtures, suspensions, and bodily fluids. Lightweight (≈ 5 kg) and small in footprint (≈ 220 × 270 × 180 mm), making it ideal for benchtops, cold rooms, and transport between labs. MedWrench Rotors & Accessories Compatible with a wide range of rotors, including: 24‑place 2 ml rotor 18 × 0.5 ml 12 × 2 ml PCR strip rotors Haematocrit capillaries (24 × 50 mm) MedWrench Summary The MSE Micro Centaur Plus (MSB010) combines high speed, compact design, programmable flexibility, and strong safety measures. It's a reliable, maintenance-light option with long-term part availability, making it a solid addition to lab environment

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER PLUS (Müşteriye Özel Ölçüler), control type: CNC control, laser type: fiber laser, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine primarily used for cutting large metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials of variable sizes, it allows for flexible operation by creating continuous, uninterrupted, and independent cutting zones at different points of the machine. Enables higher production speeds and increased efficiency when processing large-volume materials, leading to significant savings in time and labor. * Single table, fixed cutting bed. * Customizable, available with a wide range of cutting areas. * Equipped with Raycus, MaxPhotonics, and IPG resonators. * Features Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touch screen for easy operation. Rsdpfx Aksyy Nrvsxet * CE-compliant. * Configurable with fiber laser sources from 2kW up to 30kW. * Bevel cutting option available. * User-friendly design, easy access to the cutting area. * Thermally processed, robust monoblock welded steel frame for enhanced structural integrity. * Aluminum bridge design provides higher resistance and dynamic performance. * Energy saving through low power consumption. * Remote service capability. * Automatic lubrication system. * Since both design and manufacturing are done in-house, custom production is available according to customer requirements.

Condition: used, mileage: 223,500 km, power: 125 kW (169.95 HP), color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be pleased to assist you by phone at: Daily 65C17 Refuse Collector Truck Zoeller Micro HG 5 SL _____ Wheelbase: 3,750 mm, right-hand drive, air-suspended driver's seat, automatic transmission, automatic climate control, radio with Bluetooth interface, twin rear wheels, central locking, PTO (power take-off), multifunction steering wheel, reversing camera, height-adjustable driver and passenger seat, driver's airbag, and much more. We are happy to make you an offer for the trade-in of your used vehicle. If you wish to lease or finance your vehicle, we will gladly provide you with a customized quote. Subject to errors and prior sale! Mr. Rudolph will be pleased to assist you by phone at: Further information can be found on our homepage: ... ESP, right-hand drive = Further Information = Engine displacement: 2,998 cc Gross vehicle weight: 6,500 kg Please contact Tobias Ebert for more information. Redpfxoyfqmws Akxst

Condition: used, Year of construction: 2019, Action package 1 Walterscheid wide-angle articulated top hitch / electro-hydraulic operation Hopper inner ring (straw ring) Reduction gearbox / 1000 rpm with el. hydr. operation Umscha pneumatically braked axle 20 m3 / i-FeedGood L with 4 weighing rods Rjdpettv Imsfx Akxjt

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, cutting width (max.): 20 mm, type of input current: three-phase, total length: 750 mm, total width: 1,000 mm, total height: 1,150 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 1,150 mm, space requirement length: 750 mm, space requirement width: 1,000 mm, Bread slicing machine Rsdpfx Aovkn Hzskxet Wabäma model: Allround Economy Plus 380.200 Max. number of slices: 100 pcs/min Blade with high-quality special Teflon coating Mobile machine Only with us: DGUV V3 tested Connection: 400V, 16A CEE plug Used machine, inspected by SAB + spare parts service Options: Maintenance contract Spare blade Service package Many bread slicing machines in stock!

Condition: used, New: Yes Part suitable for: machines Type number: 1262970 0165 R 020 BN3HC Rodpfx Aoyk R Ulekxjt

Condition: used, Amplifier unit, amplifier Redpfjdkqhdox Akxst -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm 4 unloading arms new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Redpfjyh T Ruox Akxjt Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Condition: used, This listing is for a ENVAIR Safe Comfort Plus Safety Cabinet Rsdpfx Aexzgzzekxot

Condition: used, Year of construction: 1992, Max. cutting width: 5300 mm Max. cutting height: 2200 mm Saw blade diameter: 300 mm Max. processing thickness: 80 mm Saw blade bore: 30 mm Redpfx Asy H E Utokxst Lower support: fixed rollers Material support: tilting plastic slats Measuring system: scale Saw head tilt: manual Saw feed: manual Mounting: free-standing Extraction: external extraction Saw beam locking: manual Approx. weight: 1,500 kg Dimensions: 6300 x 1300 x 2900 mm Motor power: 5.5 kW Stock location: Supplier

Condition: used, Year of construction: 2019, This MicroStep Master Cut CNC plasma cutting machine, type RS, is being auctioned online in our industrial auction/machinery auction for the inventory of ZINK NFZ GmbH & Co. KG. You can find this and many other items on our platform. Rjdpfxjy Hqmze Akxet

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 180 mm 250 - 3000 U/min 0,45 kW 400 mm 248 mm Redeynmz Nopfx Akxot 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: ready for operation (used), Agie MJG 2119 A Zch 615072.6 + Step motor driver REX MJG 2113 A 629753.5, used, normal signs of wear, 100% functional Rjdpfx Aksi D Twwexst

Condition: ready for operation (used), Step-Tec HVCS230-S-20-1.2/15-3FD-HSK-A63 high-speed spindle Id. 6014.058.A.10e removed from Norte VS500 Speed, the thread on one of the connectors is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Redpfx Aeul Ipnokxot