5
ELECTRO-BAINMARIE, BAIN-MARIE
-Body: made of stainless steel
-Connected load: 3 kW
-Tabletop unit
-Connection: 220 volts
-Dimensions: 600 x 650 x H 380 mm
3dbxg2zx
-Container: 500 x 500 x 170 mm
-Number: 2x devices available
-Price: per piece
15
12
Cooking course by Herzog + Langen
E88z2ev
3 x deep fryer 1276S
1 x water bath 1291S
1 x water bath 1282S
1 x compartment for GN containers
Dimensions: HxWxD
85x255x85cm
Forwarding costs please contact us.
More articles - new and used - can be found in our shop!
International shipping costs on request!
6
We provide the following to the purchase :
Itemnumber: 12823
Stainless Steel
3 Bain Marie
Dimension cm: W/D/H 30/50/21
+ extra Water bath
Tray-filing.
Dimension in cm: W/D/H 90/233/110
02mx7tjng
refrigerated drawers and cooling times (without Cooling part)
for more information please contact us.
please keep the item number ready
Shipping costs on demand with us
4
Bain Marie food warmer
-ELEKTRO-BAINMARIE BAIN-MARIE Hot bar
-Body: made of stainless steel
-Glass hood
-Tabletop unit
-Connection: 220 volts
-Serving tray: 460 x 270 mm
-Compartment heights: 130 mm
Bzwajtlc
7
This is a food serving trolley SAG 3 from the manufacturer Blanco.
The trolley has 3 Bainmarie basins and 2 heatable compartments, individually adjustable.
The food serving trolley has been tested in our in-house workshop and the device is fully functional.
The stated price is net, plus 19% VAT.
Our used equipment service for you
- 6 months warranty on all electrical parts
- High quality branded equipment at fair prices
- Professional overhaul / inspection & expert cleaning
Cavzwgmatm
- tested &...
3
Jogger RB2
G7u7q2ff3
Format 87 x 72cm
- mechanical height adjustment
- tilting mechanism for table
- hinged flap right
- hinged flap left
380V - 2.2A - 50Hz/Cycl - Phase 3
6
Builder: HAAS
Model: 700/1500 HDWV-D
Motor: CAT C9 300 HP
Work Data: W. 6.850 mm x L. 2.530 mm x H. 2.700 mm
Operative Data: W. 8.700 mm x L. 2.530 mm x H. 3.200 mm
Year: 2011
Hourly Production: 30 t/h
Cgxx8qlsme
Rotor: 2 Pz (TWIN SHAFT)
Rotor Data: L. 1.500 mm x D. 700 mm
Rotor Tools: 7/6 TOOTH per ROTOR + 4 TOOLS
Weight: 19.000 Kg
2
The reconditioned vacuum pump is available from stock and ready for immediate use.
We recommend that installation be carried out by trained personnel only.
Adaptation material available on request.
Oil filling: M-VAC 100
Technical data:
7.5 kW
3 x 190 - 208/380-415V/220-240V
50 Hz
incl. gas ballast in B-cover
incl. level switch
F7fv9hk
cooler reduced
Ultimate pressure with open gas ballast: 1,5 mbar
Ultimate pressure with closed gas ballast: 0.82 mbar
Subject to prior sale!
5
Bain Marie food warmer
-ELEKTRO-BAINMARIE BAIN-MARIE Hot bar
Bzsjxxb
-Body: made of stainless steel
-Glass hood
-Connected load: 1.14 kW
-Tabletop unit
-Connection: 220 volts
5
Sangati - Turbosifter
The product is fed through the inlet and arrives at the rotor which, through its first screw section, spreads it on the beaters. The latter press the product against the cover, causing the sieving action; The product that passes through the cloth (or perforated sheet) will come out of the fabric The central funnel of the case, while the over-tails that are still in the cover will come from the rear case funnel.
Ihk9nmd
Technical specifications:
- Output: 35 t/h
- Sieve wi...
1
Polar Length Measuring System - Overhauled Original Scale for P92
Oyjtjvq
Alternative: for P76 - P155 (all EMC II machines)
Linear measuring system for all types of Polar EMC II cutting machines.
New precision measuring system for Polar SD, SDP, EM and EMC II
Introduction
LMS MOD. SET is a state of the art technological product that incorporates the latest
decoder and chipset. LMS MOD. SET can upgrade the older LMS of POLAR SD, SDP, EM and EMC II model to the new ED or XT series. It is the bes...
6
Builder: DOOPSTADT
Model: SM 518 PROFI
Cetqo8wqfs
Hourly Production: 60 m³/h
Screening System: TROMMEL L 4.700 mm X D 1.800 mm
Weight: 13.000 kg
Description:
Type: ENGEL ES 1350/250 HL-VICTORY
Year : 1999
Hours: 51350
Locking force: 2500 kN
Screw diameter: 60 mm
Displacement: 735 cm3
Opening distance: 850 mm
Min. Tool installation height: 350 mm
Max. plate distance: 1200 mm
Tension plate size hor. x vert.: 1050x650 mm
Good used and fully functional 250 ton machine with robot, in operation until November 2022.
Supplier:
Ab Plasto Oy Ltd,
Iem8jmb
Mariehamn, Åland.
12
Machine available with :
Dpwd8ww
– Refurbished mechanical part
– New electrical cabinet
– New electrical cabinet
– Siemens S71500 control panel
– Double acting hydraulic pick-up pos. 6
– Independent control pos.1, 2, 4, 5
– Geometry and bore for glasses
– Machine guaranteed 1 year: including parts and labour
– Equipment and toolholders on request
Don't hesitate to contact us for more information.
5
Bain Marie food warmer, ELEKTRO-BAINMARIE BAIN-MARIE, hot counter
-Body: made of stainless steel
-Glass hood
-1x pane is missing
-Interior dimensions: 750/550/H430 mm
Qk2dp37aj
-Connected load: 2.2 kW
-Tabletop unit
-Connection: 220 volts
9
Sieving machine Cyrus 1000 x 600
in single-deck construction, consisting of:
- Vibration resistant frame made of carbon steel
- Tension unit for sieve inlay
- 1 piece of sieve inlay made of carbon steel, mash width 5 x 20 mm
- 1x sieve cleaning, consisting of rubber balls
- 1x unbalance motor:
- type: FE 190-4-2.3
- motor power: 1 x 1,5 kW, 1.440 rpm, 400 V, 50 Hz
- protection class: IP 66
- Isolation class: F
- EX-protection: ATEX II 3D 120°C
- Compression springs for vibratio...
5
machine fully refurbished
CE cutting programmes
OMA (periscope)
Cgs39dm3qd
two hand safety cutting
side tables (2) -cast iron
2 knives
6
Builder: WILLIBALD
Model: SHARK
Engine: MAN 382 kW (520 HP)
Data: L. 11.750 mm x W. 2.500 mm x H. 4.500 mm
Year: 2011
Working Hours: 7.500 h
Hourly Production: 220 m³/h
Shredding System: 48 HAMMER
Rotor Data: L. 1.450 mm x D. 1.100 mm
N° RPM Rotor: 1.300 RPM
Fuel Tank: 450 L
Weight: 19.000 kg
Available from mid -December 2022
Cfiwren0uz
7
good privately used excavator without known defects
600 hours / next maintenance at 650 hours
Qx9o7
11
GILDEMEISTER GM 42 n°4901/057, year 1994 with bar loader IEMCA PRA 40/33P n°94111509
- Hydraulic pick-up st.6
- Hydraulic back burring slide
- 5 frontal spindles
Kv2fb3xb
- Swarf conveyor
6
3D coordinate measuring machine in post and beam construction
On-floor installation
Height above floor 240 mm
Measuring range
X 8,000 [alternatively 3,700] , Y 1,800 , Z 2,100 [mm]
Uncertainty of measurement
25 + L/40, max. 60 [µm] at L=6,000 mm
Dynamics
3D-travel speed 150 mm/sec
3D acceleration 700 mm/sec²
Touch probe
B3axfomzaf
Renishaw PH10M
Renishaw TP20+2 modules
Control system
Hexagon B3C-LC (alternative possible)
Radio control unit
external terminal
mobile remote terminal
Software
PCDMIS...
7
Manufacturer number: 913594002
Inlet opening: Ø 250 mm
Aspiration connection: Ø 100 mm
Roller length: 1200 mm
Cgjc0f8nb9
Feed rollers: 0,37 kW
Crushing rolls: 4,0 kW
6
Engine: Perkins
Motor power: 38 kW - 51 hp
Machine weight: 8,000 kg
Transport measures
Length: 9,750 mm
Width: 2,550 mm
Height: 4,000 mm
Operational measures
Length: 11,610 mm
Width: 4.810 mm
Height: 3,080 mm
Year: 2015
Work hours: 2,700 h
Dz2c7e
12
1 off TNL26 year of manufacture: 2009, NC: Mitsubishi TX8i-s, production hours: 37 739 hours
IEMCA Boss 332 bar loader for 4 meters bar long, HP pumps (30 bar – 120 bar and low pressure) KNOLL Typ 240 S-1*100 conveyor reinforced with HB400.
Cfr3skqr9n
Main spindle S1 with C-axis + Z1-axis and adjustable but not programmable, Sub-spindle Main-spindle S1 with C-axis + Z4-axis and Hainbuch Chuck Turret n°1 to 12 stations with X1/Y1-axis
Turret n°2 to 12 stations with X3/Z3-axis Back burring stat...
3
Screening machine Mogensen Sizer LC 2026
in multi-deck design, consisting of:
- vibration-resistant frame housing made of structural steel
- clamping device for all screen covers
- 2x 2 pieces sieve cover made of stainless steel (1.4301) with the required
mesh widths
- 1x screen cleaning, consisting of:
- Knocking belt units with elliptical, light rubber balls,
mounting brackets for the self-cleaning of the screen linings
- 2x unbalance motors
- type: MX-940/6
- power: 2 x 3,1 k...
13
INDEX MS 22-6 Year 2017
- Dual NCU, Siemens C400D Solution Line
- 16'' TFT touch screen
- Double pick-up spindle
Axes :
1.1 XZ
1.2 XZ
2.1 XZ
2.2 XZ
3.1 XZ
3.2 XZ
4.1 XZ
4.2 XZ
5.1 XZ
5.2 Z pick-up spindle swinging axe D22, Hainbuch
5.3 X Back burring slide with 3 fixed tools or 3 driven tools
6.1 Z Pick-up spindle swinging axe D22, Hainbuch
6.2 XZ (CS 6.1)
6.3 X Back burring slide with 3 fixed tools or 3 driven tools
INDEX suspended end of bar catcher
22000 h/production
2 Artis V.6 PB cards
O...
10
Tube bundle dryer type RKS 5
This contact dryer is designed for free-flowing biomass products
- Design: Horizontal tube bundle dryer
- Indirect heating with steam
- Heating surface consisting of boiler tubes, which are rolled into tube
sheets at both ends
- Axial and continuous transport of the material to the heating surface
by lifting and transport blades on the outer circumference of the
bundle
Specifications:
-Heating by steam: from 140 to 210°C steam inlet temperature
- Thermal...
13
Wickman 1"3/8 n°12163
Rebuilt in 2000 with AC speed and feed motors
- Swarf conveyor
- AC speed and feed motors
- Station 6 pick-up motor
- Pick-up station 6
- Threading attachment station 5
- Siemens OP17 display
- Length detector
- Part catcher
- 4 flat form toolholder Goltenboldt 20x20
- 1 cutting part-off toolholder
- 2 independent bracket toolholder station 4-5
Fhuapvo3u
- 3 central block bracket toolholder
- 5 drill holders
- 1 shaving toolholder
- SIR IEMCA 32/33F bar loader N°0200224M04...
7
Type of conveyor belt: belt with carrier
- Carrier shape: V-shape
- Effective working width: 700 mm
- Drive and return station
- Main switch
- Without supporting structure
- Conveyor speed: 1,6 m/s
- Motor:
- Brand Rulmeca, type 220 M
Yt8uk8
- 3 kW, 400 V, 50 Hz
- Isolationclass F
11
Machine available with:
Qyl7l
– Swarf conveyor
– Stock carriage and stand
– Cross slide toolholders set
– Longitudinal toolholders set
– 1 Extra box with Pick-up head and ramp recessing
– 1 Extra box with gears, toolholders with documentation
10
Basic pelleting press consisting of:
split cast housing with cooling fins in the drive area
drive consisting of worm shaft and worm wheel (made of bronze), in good condition
main shaft with grooves and new fether keys
main bearing / worm shaft bearings + seals in the gear unit completely revised / checked
new oil system installed with oil pump, filter, flow meter, thermometer and dirt trap
knifes holder and knifes below the die revised and checked
die seat revised and checked
pelleting press du...
3
Machine available with:
- Stock reel and stand
Fhstzfc98
- Swarf conveyor,
- Pick up original SCHÜTTE
Toolholder:
- 1 bracket toolholders
Attachment & tool holders extra on demand
6
Hammer mill – Bühler DMSE 10
Inclusive:
- Rotor and hammer plates
- Execution with two sieves
- Service openings at the sites
- Miscellaneous sieve inserts available
- Motor power 75-90 kW (other size on request)
- Without hammer mill feeder
Znabeet9
