Used Miwe Co 5.1208 for sale (27,208)

Condition: good (used), functionality: fully functional, total length: 1,300 mm, total width: 1,500 mm, total height: 1,950 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Deck electric oven Miwe Condo, model: Type: CO.5.1208 with AS control unit. Top and bottom heat can be regulated separately. 5 baking decks, each 1200 x 800 mm. Mobile base with locking wheels. Connection: 400V, 5 x 16A-CEE plug. Dimensions: 1500 x 1300 x 1950 mm (W x D x H). Pjdpfxsv N Tkce Amiegk Used oven. Visit our large showroom!

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 5 Hz, type of input current: three-phase, machine/vehicle number: 73185, Deck oven electric baking oven Miwe Condo Model: Type CO.3.1208 AS control panel Bottom and top heat individually adjustable 3 baking decks 1200 x 800 mm 3 ovens with steam function Mobile base with locking casters Connection 400V, 3 x 16A-CEE plug Water connection 3/4 inch, drain DN 40 Dimensions: 1500 x 1300 x 1950 mm (WxDxH) Psdjxduxaopfx Amijgk Used baking oven Visit our large bakery equipment warehouse!

Condition: refurbished (used), functionality: fully functional, used shop oven / confectionery oven Miwe Condo CO 4.1208, refurbished, 4 decks, with exhaust hood and proofer, decks 120 x 80 cm, electrical, 4 magnetic valves renewed, 4 actuators renewed, steam cylinder renewed, swaths cleaned, serial no. 703 774, 33.8 kW, 400/230 V, 50 Hz Pedexwp Ntspfx Amiogk

Condition: like new (used), Deck oven with 4 decks and proofing cabinet Manufacturer: Miwe Model: Condo CO 4.0806 2D With 4 shelves each 80x60cm max. temperature: 320°C Shelf entrance height:13cm With proofer With exhaust air bonnet and steam condenser Pedpfsxulhysx Amijgk Year of construction 2013 Power: 18.9kW Voltage: 400V / 50Hz External dimensions: 110x115x210cm

Condition: like new (used), Electric oven 4 floors and fermentation chamber Podpfoxulhmsx Amisgk Stainless steel Easy to clean Tray dimension: 80 x 60cm Voltage: 400 / 230V / 50HZ / 3/N/PE Power of 1 deck: 5.9kW

Condition: used, Bakery oven Psdpfxour Ixpo Amisgk With three floors and a stand Manufacturer: Miwe Model: CO 3 External dimensions: 150x130x140cm Internal dimensions: 120x80cm Capacity: 3x4 trays (60x40cm)

Condition: good (used), Used bakery oven Miwe Condo CO 4.120/120, refurbished, 4 decks, with exhaust hood and baking tray, baking surfaces 120 x 120 cm, electric, 4 magnetic ventilation openings, baking chamber height 20 cm, 47.2 kW, 400/230 V, Psdpfx Amjy E Hrweisgk

Condition: like new (used), Miwe Econo: Electric, 400 volts, year of manufacture: 2022, consumption: 16.1, for trays 60x40 cm, for 10 trays, with hood, baking chamber and steam condenser, in very good electrical condition. Pedpfey Avpgex Amiegk

Year of construction: 2003, condition: good (used), 297 USED MIWE BACKCOMBI Oven. The oven consists of: - AERO convection oven (with fan) for 4 baking trays: 60x40 cm, - CONDO deck oven with chamber dimensions: 60x40 cm (2-chamber), - Proofer for 8 baking trays: 60x40 cm. EXTERNAL DIMENSIONS (in cm): - Width: 90, - Height: 222, - Length: 104. TECHNICAL DATA: - Year of manufacture: 2003. Paid options available: renovation / transport of the device. Pjdpfx Ajyg H A Dsmisgk The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Year of construction: 2009, condition: used, functionality: fully functional, Reliable MIWE EC6.0604. Oven - Used but in excellent condition! For sale is a well-maintained, used MIWE ECONO type EC6.0604 with base cabinet and steam and extractor hood, built in 2009. Technical specifications: Pjdsv Hzn Rspfx Amiegk • Energy consumption: 9.5 kW • Voltage: 400-230 V, 3/N/PE • Frequency: 50 Hz Ideal for high performance and demanding baking environments Although the oven is used, it has always been carefully maintained and is in excellent condition. It is ready for immediate use and suitable for a wide range of bakery products. Collection and shipping possible* Sale without any warranty

Condition: good (used), 228 USED Miwe Condo Pastry Oven, electric, three-deck. TECHNICAL DATA: - Baking chamber dimensions: 60x80. EQUIPMENT: Pgodpfx Amoxznx Ijiek - Steam chamber, - Proofer with steam chamber, - Hood, - Oven on wheels. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Pgjdpfxou Tha Ij Amiok Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Pedpfx Amju Thh Eoisgk Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a Pgodpfxjx A U Ncj Amijk bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: like new (used), Miwe Condo 60x80 with proofer underneath Pgedpowycb Dofx Amisk

Condition: like new (used), Miwe Econo baking oven for 10 trays with proofer Pgodpfxewyccbj Amiok

Year of construction: 2023, condition: excellent (used), Weighing and Bagging System Year: 2023 Comprising of: - Pjdpfx Amsy Exfveisgk 1 x Incline Conveyor, approx. 5m height Gantry 1 x 14 Head Multihead Weigher, dimple pan 1 x Vertical Form, fill and seal bagger, Model: X500 (was packing 180g bags of Mangetaut) 1 x Checkweigher *Lots of videos available*

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 9332067, ROLLER CONVEYOR - CONSTRUCTION BLASTING SYSTEM MANUFACTURER: RUMP TYPE: 20-W 1500-4 Manufacturer: Rump Type: 20W-1500-4 Year of manufacture: 2012 Psdpoy Entijfx Amijgk Please refer to the technical drawing for dimensions, as well as for the operating hours. Including filter unit, sound insulation, control cabinet, complete documentation, etc. TOP CONDITION This is a ready-to-use, pre-owned machine. Sale is made without warranty and without guarantee. Subject to prior sale and errors.

Condition: used, -External dimensions (LxWxH): 1550x1600x2560 mm -Trolley: 600x800 mm -Baking surface: 9.6 m² -Minimum ceiling height: 2850 mm -Fixed Program Control -Heating mode: Gas Lrsyewxmy Us Tdxuger -Nominal thermal output: 75 kW -Voltage: 400 V -GAS burner -It is well known: the MIWE roll-in is probably the most economical rack oven in the world (and this has been proven in hundreds of bakeries). -Its excellent baking properties make it truly unique in its category—and for good reason. -For consistently even baking, 'atmospheric baking' completely eliminates disruptive influences caused by ambient conditions and draft. -The patented MIWE aircontrol system ensures precise heat transfer and perfect crispness. MIWE delta-baking, with extremely precise temperature control, allows for true custom settings, e.g. for pastries and fine bakery goods. Pgedjwxmy Ujpfx Amijk -In addition, with the heat recovery wall combined with a high-performance steam device, quick successive baking at reduced connected load becomes possible. And these are just a few of the many good reasons to take a closer look at the MIWE roll-in.

Condition: not inspected (used), Assortment – pneumatic clamps, cylinders from Tünkers, DE-STA-CO, etc. Approx. 50 pieces with plenty of accessories and spare parts ----- Condition of item: Goods come from a spare parts warehouse clearance. Not tested by us. Internal number: 484 Pjdsy Akq Espfx Amiegk

Condition: excellent (used), 370 USED Miwe Ideal Thermoespresses ovens + Athlet loading/unloading system. The devices are in good working order. EQUIPMENT: - 2 deck ovens, 29 m² each (total: 58 m²), - Athlet loading/unloading system, - heating boiler, - documentation. Psdpfxjy Egyns Amijgk The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the set. The price is a net price per set. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, Opportunity: Glass modules from Swiss liquidation, 96 glass modules Psdjyxth Sspfx Amiegk

Condition: new, machine/vehicle number: 37 R9633-2, Drill-Ø with twist drill up to: 13 mm Drill-Ø with crown drill up to: 35 mm drilling stroke: 115 mm drive power: 680 W electrical connection: 220/240 V Pgjdpfxjc N T Hre Amisk magnetic base dimensions: 92 x 172 mm weight: 13 kg

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel Pgodpfehx Elfox Amiek The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: Pgjdpsyzxfnjfx Amijk - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)