Used Mosa Generator for sale (9,651)

Year of construction: 2022, condition: new, machine/vehicle number: AN2301154, Stationary power generator - immediately available from stock Our standby power generator is an important part of your company's power grid. It is always ready for use and can step in immediately in the event of a power interruption. Electrical data: Rated voltage and frequency: 400 V / 50 Hz Supply power (PRP): 60 kVA / 48 kW Fuel consumption: Tank capacity: 100 liters Fuel autonomy at 75% load: 8h Noise level: Sound pressure level (LPA) at 7m: 68 dB(A) Dimensions and weight: Length x width x height: 2165 x 900 x 1428.5 mm Weight: 1210 kg Lredpel R Hv Asfx Akqjk Immediately available pre-configured with the following optional equipment: Coolant preheating Automatic control panel with Battl. 3 way fuel valve for operation from external tank Optional junction box for emergency power operation is also available.

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Ljdpsv Uag Iofx Akqerk

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Lsdpfx Aoyl Nntjkqjrk

Condition: used, Technical details: rated capacity: 2,5 kVA revolution per minute: Motor: 3000 U/min type of fuel: Benzin dimensions L x W x H: 0,57x0,42x0,45 m weight: 50 kg TWO GASOLINE GENERATORS - engine: Honda GX 160, 4 stroke - 3,6 l tank capacity Ledpfx Aeu Nvadekqerk generator: type Sincro EP2 72L; 2,5 kVA, power 230V; 10,8A; - silenced, syncron - Starting: Reverse start - Sockets: 1x Schuko and 1x CEE 16A / 230V *

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Ljdpfox U Tgmex Akqjrk The unit looks as good as new. The system was only in operation for a short period.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) Ledpfxoxfrv Ee Akqork 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Lredpfew U N Dasx Akqek

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Voltage: 400/230 V Phases: 3 Fuel type: Diesel Lodpfey Emwyjx Akqjrk Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Lrodpferuakgjx Akqsk Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Lrsdpfxjxaqa Se Akqok Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Lrsdpfxjxdfazs Akqsk Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Lodpfsxdfa Ujx Akqsrk Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Lsdpfx Akjrtrykoqjrk Weight: 17,500 lbs.

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: Lrjdpsyt Rc Isfx Akqek - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. - Not suitable for medical oxygen.

Condition: good (used), Year of construction: 2014, operating hours: 246 h, functionality: limited functionality, overall weight: 3,000 kg, fuel type: diesel, color: green, power: 176 kW (239.29 HP), output current: 318 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 176 kW (239.29 HP), nominal power (apparent): 220 kVA, continuous power: 163 kW (221.62 HP), continuous power (apparent): 203 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo mPenta, type of cooling: water, Brand: Pramac Model: GSW220V Lrjdpfxsy A Iuuj Akqek Year of manufacture: 2014 Serial number: PEE2563417 Operating hours (read): 246 Capacity (kVA): 220 - 202.8 Capacity (kW): 176 - 162.2 Engine brand: Volvo Penta Engine model: TAD733GE Fuel: Diesel Alternator brand: Mecc Alte Alternator model: Eco38 2S Voltage: 400 Frequency (Hz): 50 RPM: 1500 Amperes (A): 317.6 Dimensions LxWxH (mm): 2650 x 1180 x 2450 Weight (kg) approx.: 3000 Units in stock: 1 Made in: Spain Comments: Ex-emergency set in good condition

Condition: used, cone distance min./max. 0-108 mm Lredjyh Rmmepfx Akqok Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation

Condition: good (used), functionality: fully functional, fuel type: diesel, power: 257 kW (349.42 HP), nominal power (apparent): 300 kVA, Generator set 300 kVA Generator: GARBE LAHMEYER Type: AT 315 LB 51 400 V Output: 300 kVA Engine: MWM-Diesel TBD 232V12 Lredpot S Ny Uefx Akqok installed in container

Condition: used, Year of construction: 1992, SCANIA DS9 56 engine - variant A20T LEROY SOMER generator LSA 46M3S Lrodpfxstphzdo Akqsk 140 kW / 175 kVA / 400 V / 1500 rpm

Condition: used, functionality: fully functional, Working area: approx. 800 x 4,000 mm Lodpfxsw Dzwfj Akqork multi-stage pre-screen bar grate drive 2 x 4 kW VIMARC with steel construction and feed hopper

Condition: new, Year of construction: 2022, machine/vehicle number: U045006, Field of application: Construction Empty weight: 771 kg Generator capacity: 300 kVA Dimensions of cargo space: 110 x 60 x 82 cm CE mark: yes Frequency: 50 Voltage: 400 Please contact Kenny Bongers, Tijmen Pesselse, Ronald van der Laar or Arjen van Dijk for more information Flywheel size: SAE1/14" Mecc Alte ECO38-1L/4C DER1 voltage regulator Lrsdpfx Aoy Hbpmokqek 300kVA continuous / 330kVA stand-by power

Condition: new, Year of construction: 2024, machine/vehicle number: DGDH1397S22818H, fuel type: diesel, motor manufacturer: Perkins 4008-30TAG3, General information Field of application: Construction Weights Empty weight: 9.896 kg Functional Generator capacity: 1.250 kVA Dimensions of cargo space: 582 x 227 x 280 cm CE mark: yes Other information Fuel consumption: 188 Liter / Hour at 75% Load Generator: Gentech GNT-1250 Frequency: 50 Lrodpfx Aoyg U Nxekqsk Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 2060 l Additional information Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 2023, operating hours: 8,973 h, machine/vehicle number: ESF372667, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Ljdjyz Iyuepfx Akqork Empty weight: 1.039 kg Generator capacity: 40 kVA Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2016, operating hours: 11,629 h, fuel type: diesel, motor manufacturer: yanmar, Field of application: Construction Lrjdpfsy Hbq Djx Akqsk Please contact Kristoff Van Havere for more information

Condition: used, This listing is for a Bioquell Clarus L Hydrogen Peroxide Vapour (VHP) Generator. The unit is in full working condition and ready for immediate use. A mobile system designed for surface bio-decontamination of labs, isolators, and equipment, providing 6-log sporicidal reduction Ljdpfx Aoy D T Ngekqsrk

Condition: used, Year of construction: 2023, operating hours: 12,298 h, machine/vehicle number: ESF372638, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Generator capacity: 40 kVA Transport dimensions (LxWxH): 2.45x1.1x1.48 Ljdpfx Akjyzl Hxoqerk Please contact PFEIFER GROUP for more information