Used Obru Strip Decoiler for sale (2,437)

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Kdsdsif Sg Sjpfx Abgsk Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: good (used), functionality: fully functional, Decoiler for up to 150 kg coil weight, stepless speed adjustable from 5 to 25 m/min. Rjbmnaoyyvzkj Sh Uer Kdedpfeyyyrmsx Abgjk

Condition: new, functionality: fully functional, Decoiler for up to 150 kg coil weight, fixed rotation speed of 10 rpm. Kodpsyyvzkefx Abgodk

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Kjdohx R Etspfx Abgsdk Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: good (used), functionality: fully functional, Motorized decoiler, manufacturer SOPREM Load capacity: 200 kg Kdodpfx Abeyr Rdcegok Coil diameter: 900 mm Maximum strip width: 220 mm Expanding range: approx. 240 - 550 mm

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Kdjdpfx Aboyt Eldegjk Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Kdodstgvgpjpfx Abgok Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm Kodoxtp Eyepfx Abgedk coil inside diam. 240 - 560 mm coil width: max. 120 mm

Condition: excellent (used), Year of construction: 1995, loading capacity: max. 40 Kg. disc outside diam. 650 mm bundle outer diam. max. 600 mm bundle innert diam. 170 - 310 mm bundle width: max. 200 mm Kedpfxei T Ir As Abgsdk

Condition: excellent (used), Year of construction: 1978, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm Kjdpfx Aboi Hi Swsgodk

Condition: used, functionality: fully functional, Year of construction: 2015, The mechanical CIDAN decoiler DO is an easy-to-maintain decoiler with an adjustable central shaft. Kodpfx Abjx Sw U Negjdk

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm Kjdpfx Abexvitvogjdk coil outer diameter: 1100mm coil weight max 100kg

Condition: excellent (used), Conventional lathe Inv. no. 3506 Ayel-Tech Model BT 400 * Turning length: 1000 mm * Swing diameter: 400 mm * Spindle bore: 52 mm!!! * Spindle speed: 70 - 2000 rpm * 3-axis digital readout SINO * Foot brake * Coolant system * Machine lamp * Safety cover * Fixed steady rest * Follow rest * 3-jaw chuck * 4-jaw chuck * Emergency stop * Change gears Kdsdpfx Aoxp Idgjbgsk * Chip guard/rear panel * Documentation * 400V

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Kdjdpfewvv Rqsx Abgjk Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Kdjdpfx Aeytqxpsbgsk

Condition: good (used), Reel, unwinding reel, winding reel, unwinding reel, sheet metal unwinder Kdsdpfx Abjx Ifc Togsk -Reel: with 3 retaining brackets -Diameter: 950 mm -Reference: M20 shaft, dimensions see photos -Dimensions: Ø 950 x 410 mm -Weight: 35 kg

Condition: good (used), Double reel, reel, unwind reel, motorized reel for sheet metal processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, sheet metal unwinder -Manufacturer: OBRU, height-adjustable reel with drive Kdjdohfavuspfx Abgsk -Diameter/Width: adjustable, see photos -Dimensions: 750/730/H1130 mm -Weight: 114 kg

Condition: ready for operation (used), decoiler OBRU 300 kg x 220 mm under power Kdsdpfoxx R Utox Abgsk

Year of construction: 2021, condition: used, DECOILER Kodpjgf Aaqefx Abgodk MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw LIKE NEW UNUSED 4 PIECES IN STOCK

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 23/06/2026 and 26/06/2026! Auction of two decoilers, one of which is an EOC V 1000 AE-S (2001) TECHNICAL DETAILS Diameter: approx. 1,200 to 1,500 mm Kedpfxoy D Tlns Abgsdk MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,800 mm Weight: 600 kg External reference: 69

Condition: used, Year of construction: 1984, material width 300 mm coil weight 0,5 t material thickness 0,4 - 3,0 mm Ksdjvuk Icjpfx Abgjdk coil internal diameter 420 - 520 mm coil external diameter 1200 mm no. of straightening rolls 9 straightening roll diameter 50 mm number of draw-in rolls 2 diameter of draw-in rolls 50 mm power requirement 1,5 kW weight 1,55 t dimensions (WxDxH) 2,5 x 1,2 x 1,8 m Straightening machine with infinitely variable drive, supporting rolls, 2-point-adjustment of the straightening rolls Decoiler not driven, with pneumatic lag break, manual centralized expansion

Condition: used, Year of construction: 2015, total length: 1,500 mm, total height: 1,800 mm, total width: 2,500 mm, Empty weight: 1.000 kg Price: On request Capacity: 42 tons Max. bending stroke: 200 mm Ksdpfxsyy Slxo Abgodk Table dimensions: - Length: 1250 mm - Width: 850 mm Ram dimensions: - Length: 300 mm - Width: 200 mm Model: Horizontal bending machine - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Motor power: 4.0kW - Transport dimensions: 1500mm x 2500mm x 1800mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) Kedjxixruspfx Abgjdk - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2018, LARA CDCH-1400 SHEAR (year 2018) With discharge table. Hydraulic shear designed for cross-cutting strip material and managing scrap in coil feed lines. Supplied together with a discharge table, allowing for convenient and safe evacuation of cut material while maintaining a clean and continuous production process. Robust equipment with heavy-duty industrial construction, especially suited as an auxiliary component for cutting, stamping, or coil-feeding lines. Main Features • Hydraulic cross-cut shear • Hydraulic drive • Robust design for continuous operation • Clean and precise cutting of metal strip • Integrated discharge table • Facilitates evacuation of scrap and off-cuts • Improves ergonomics and orderliness on the line • Keeps the work area clear • Heavy-duty industrial construction • Rigid and stable frame • Designed to be integrated at the same height as the LARA feeder/straightener • Easy integration into existing lines • Safety system • Integrated into the line control system • Designed in compliance with CE standards Work Materials • Carbon steel Ksdpfxey Edlhe Abgsdk • Stainless steel • Aluminum and light alloys Main Technical Data • Maximum working width: up to 1,400 mm • Type of drive: hydraulic • Working pressure: 4–6 bar (pneumatic control system) • Power supply: 400 V / 50 Hz

Condition: used, Year of construction: 1986, material width 500 mm coil weight 2 x 2,0 t material thickness 1,0 - 6,0 mm coil internal diameter 350 - 420 mm coil external diameter 1600 mm no. of straightening rolls 9 straightening roll diameter 50 mm number of draw-in rolls 2 speed 0 - 40 m/min material thickness at 500 mm material width 3,5 mm power requirement 17,5 kW Dimensions (WxDxH) 2,3 x 4,2 x 2,4 m - Straightening machine RM 5050.4/9 with infinitely variable drive, supporting rolls - Double decoiler AH 2000/2/M Kedpfxsyx Ilxe Abgsdk with auxiliary drive, manual centralized expansion, pneumatic snubber roll, interchangeable jaws to widen the inner diameter +130 mm can be inspected in running condition in our warehouse