Used Operator Set for sale (35,273)

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Iodpfx Asztc Tdoc Eotk Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: as good as new (ex-display), functionality: unexamined, Ferwood Code: RS0003033 - Manufacturer Code: 0058060-1110 - Condition: Like new (display item) - Functionality: Untested - If interested we offer a revision service, contact us. Itodov Azafspfx Ac Ejk

Condition: used, Year of construction: 1975, functionality: fully functional, total height: 2,000 mm, total width: 1,200 mm, total length: 2,000 mm, type of input current: three-phase, overall weight: 3,800 kg, workpiece diameter (max.): 60 mm, input voltage: 400 V, LIDKÖPING 2C – Centerless cylindrical grinding machine (for through-feed and plunge-cut grinding), manufactured in 1975. Manufactured in 1975 · For through-feed and plunge-cut grinding · 14 grinding wheels and 4 regulating wheels, 28 support rails. Centerless cylindrical grinding machine from Lidköpings Mekaniska Verkstads AB (Sweden) for through-feed and plunge-cut grinding. Classic mechanical-hydraulic design without CNC: cast iron bed, grinding wheel and regulating wheel with a support rail in between, belt drive with two speed stages that can be switched using variable pulleys. The machine was in operation until recently at a Swabian precision manufacturing company and was used there approximately once a month; it was sold solely due to lack of space. An unusually complete set of accessories is included: 14 grinding wheels and 4 regulating wheels, 4 mounting flanges, and 28 support rails – making the machine ready for use without any further procurement. For the 2C series, service, spare parts, and overhauls are still available today in Germany and from the brand owner in Sweden. EQUIPMENT - Regulating wheel spindle with support rail - Feed trough for through-feed operation - Separate hydraulic unit (ASEA motor) - Separate control cabinet with relay control and compressed air maintenance unit - Variable pulley drive, 2 speed stages - 14 grinding wheels, 4 mounting flanges, 4 regulating wheels - 28 support rails in a wooden crate TYPICAL APPLICATIONS - Pins, bolts, dowel pins, and drift pins – through-feed grinding to final diameter - Shafts, axles, and round bars in series, also as preparation for centerless grinding Itedpfx Aszvh Uljc Eek - Rollers, sleeves, and bushings – external cylindrical grinding in one pass - Tubes and bar stock to size and roundness - Parts with a flange or shoulder – in plunge-cut operation - Rework and repair of precision parts in tool and contract manufacturing operations

Condition: used, Year of construction: 2016, Overview Complete craft microbrewery around a 250-litre batch brewhouse - the Slowbeer 250, built in 2016 by Škrlj d.o.o. (Slovenia). The package covers the whole process from malt crushing to bottling - brewhouse, two 1,000 L fermenters, hot water tank, glycol chiller, 4-spout bottling unit and malt mill. All main units date from 2016 - a turnkey set for a brewpub or a start-up brewery. Technical data - Brand: Slowbeer - main units built by Škrlj d.o.o., Slovenia - Model: Slowbeer 250 - Škrlj COMPACT BREWHOUSE MINI 250 L (type BHM 250, 2.5 hl) - Year of manufacture: 2016 - Batch capacity: 250 L - Heating: thermal-oil jackets, electrically heated - 400 V, 50 Hz - Material: stainless steel AISI 304 (EN 1.4301), vessel and jackets - Fermentation capacity: 2 x 1,000 L (nominal) Scope of Delivery - Compact brewhouse | Škrlj (Slowbeer 250) | COMPACT BREWHOUSE MINI 250 L | 250 L per batch, thermal-oil heated, agitator with Bonfiglioli gear motor, Lowara CO350/03K/A wort pump (2019), Pedrollo NGA 1B thermal-oil pump, IPROS TP4001/15 plate heat exchanger, control cabinet with Omron frequency inverters | 2016 - Beer fermenters, 2 units | Škrlj | ZKG 1000 L | nominal 1,000 L each (1,230 L gross volume per vessel), AISI 304, atmospheric vessel 0-50 °C, water/glycol cooling jackets on shell and cone (3.0 bar operating, 6.0 bar test), sample valve, level indicator, CIP spray ball; recirculation pump with cleaning hoses plus one unused spare pump | 2016 - Hot water tank | Škrlj | 1200 L | AISI 304, electric heating 24.4 kW, 0-90 °C, CE 0531 | 2016 - Glycol chiller | MTA | TAEevo TECH 020 | 400 V / 3-ph / 50 Hz, 3.9 kW electrical input, refrigerant R410A, water circuit max. 6 bar, hose circuit for the fermenter jackets, digital temperature control | 2016 - Gravity bottling unit | Mori-Tem | MODERNA B.4 A LE | 4 stainless steel filling spouts, Ebara JESX M5 feed pump, 230 V single-phase 50 Hz | 2016 - Malt roller mill | Egon Sommer Maschinenbau | PICCOLO 11 SB | 1.1 kW three-phase motor (230/400 V) | 2016 Transport dimensions (palletised, approx.) - Brewhouse: 2,400 x 1,200 x 2,200 mm, 660 kg - Fermenters (each): 2,700 x 1,100 x 1,245 mm, 240 kg - Hot water tank: 1,210 x 1,210 x 2,245 mm Itodpfxozvqi Ss Ac Eek - Glycol chiller: 1,300 x 600 x 955 mm, 220 kg - Bottling unit: 1,000 x 700 x 1,650 mm, 180 kg - Malt mill: 800 x 600 x 1,200 mm, 90 kg Condition Used - very good to excellent overall condition. Brewhouse, fermenters and malt mill in excellent condition; chiller and bottling unit in good working order. The hot water tank is fully functional, with a light cosmetic dent on the top cover and normal limescale deposits inside. CE declarations and technical documentation are available for every unit except the malt mill, where the documentation is still being confirmed. Availability Immediately. Location: Spain. Dismantling and loading by arrangement.

Condition: excellent (used), Year of construction: 2015, operating hours: 26,407 h, functionality: fully functional, BLM Group ADIGE-SYS EM 80 – Fully automatic circular saw for tubes and profiles, year 2015. We offer for sale a fully automatic circular saw, the BLM Group ADIGE-SYS EM 80, designed for precise and highly productive cutting of tubes and profiles in serial production. The machine is equipped with a Siemens SINUMERIK CNC control system and an automatic material feeding system, which enables efficient and repeatable production of larger series. Technical data: Manufacturer: BLM Group / ADIGE-SYS Model: EM 80 Year of manufacture: 05/2015 Control system: Siemens SINUMERIK Operating hours: approx. 26,400 h Tube cutting range: Ø 10–80 mm Max. length of finished part: 600 mm Total installed power: 38 kW Power supply: 380 V / 50 Hz / 3 phases Machine weight: approx. 8,500 kg Itedpfx Aezvm Dfec Esk Equipment: automatic material feeding system fully automatic working cycle multiple tool/working positions complete enclosure of the working area extensive set of interchangeable clamping jaws for various diameters – see photos supply and feeding section of the line Siemens SINUMERIK CNC control The machine is particularly suitable for serial production of shorter parts made of tubes and profiles, where high productivity, repeatability, and cutting accuracy are required. Condition and history: The machine was purchased by the current owner approximately 2 years ago for a planned production project, which was ultimately not carried out. Therefore, it has not been used in production since then. The machine has undergone a refurbishment of the hydraulic brake seals on the bed. Technical documentation in German is available, including complete electrical documentation. The offer also includes accessories and a set of clamping jaws shown in the photos.

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Itodpfx Aszvm Anoc Eok Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: good (used), Year of construction: 1972, functionality: fully functional, This processing plant is designed for the production of creams, ointments, gels, pastes, lotions, suppository compounds, etc., with a usable volume of 100 liters. The total volume with the container closed is 123 liters; the minimum fill volume is 35 liters. The system consists of a fully enclosed stainless steel container with double jacket, which can be electrically or water heated/cooled. The container features a lid with integrated mixing units and drives. The mixing vessel is mounted on three castors and can be wheeled out for filling or cleaning purposes. The lid is mounted on a lifting column for hydraulic raising and lowering, enabling convenient cleaning and emptying. It is fitted with an observation window and two inlets with valves, which can also be used for adding other product components. Additionally, an adjustable mechanism is provided for setting the grinding gap of the colloid mill. Technical specifications: Isdpsyx Sxcsfx Ac Eotk Container: Permissible operating pressure: 1 bar / -1 bar Homogenizer: 1,500/3,000 rpm – 1.8/2.5 kW Anchor agitator: 19/38 rpm – 1.8/2.3 kW Spiral agitator: 29/58 rpm

Condition: like new (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, total height: 680 mm, total width: 340 mm, total length: 680 mm, input voltage: 230 V, overall weight: 38 kg, type of cooling: air, electrical fuse: 16 A, laser power: 800 W, shaft length: 1,080 mm, continuous power: 800 kW (1,087.70 HP), Equipment: documentation/manual, head guard, Operation - Simplest operation via synergy characteristic curves - Achieve a finished weld in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hotstart, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides better understanding of setting options - Fully integrated operation in the wire feeder case – operation via the machine or wire feeder selectable Technical Features - 20µm single-mode laser source - High-performance laser cells paired with gas-cooled torches provide maximum power and focus stability - 2-in-1 machine: welding and cleaning: laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: dual wire feed Safety - Dual-channel emergency stop system - Dual-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Dual-channel fiber break detection and monitored QBH connection - Safety notices and manual activation of the laser release at every start - Dual-action pushbuttons prevent unintentional laser activation - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Processes - Hardly any distortion, incredibly fast, and outstanding quality (even on extremely thin materials < 1 mm) - Uses approximately 70% less energy - Fast and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market at approx. 680 g - Dual-channel safety loop for maximum safety Advantages of Craft-Laser Iedpfeyuvqmsx Ac Eotk - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more tedious shipping

Condition: good (used), Year of construction: 1992, functionality: fully functional, working width: 220 mm, planing height: 120 mm, spindle diameter: 40 mm, planing width: 220 mm, total width: 1,350 mm, total height: 1,400 mm, total length: 3,120 mm, spindle speed (min.): 5,000 rpm, extraction nozzle diameter: 120 mm, Available: CASADEI C4 four-sided planer – 4 heads, 220 mm The machine is used, has undergone a technical inspection, is in full working order, and is ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is the vertical adjustment of the side spindles, allowing the use of profiling heads, similar to those in a spindle molder. This makes the CASADEI C4 planer suitable not only for standard four-sided planing of wood but also for the production of formwork, paneling, moldings, and other profiled elements. Specifications: • Manufacturer: CASADEI • Model: C4 • Machine type: Four-sided planer for wood • Year of manufacture: 1992 • Working width: 220 mm • Working height: 120 mm • Number of spindles: 4 • Spindle motor power: 4 × 3.0 kW — separate motor for each head • Total power: 17.5 kW • Electric height adjustment for planing • Manual width adjustment for planing • Vertical spindle adjustment (up/down) • Machine equipped with a complete set of heads and a cutterhead • Diameter of vertical heads: 120 mm • Height of vertical heads: 50 mm • Diameter of horizontal heads: 145 mm • Width of horizontal heads: 220 mm • Spindle diameter: 40 mm • Infeed gear before the first head • Infeed table with a width of 22 cm • 2 feed speeds: 6 and 12 m/min • Lubrication pump for the table • Soundproof cabin Ijdszmhg Njpfx Ac Eotk • Original paint • Dust extraction ports: Ø 120 mm • Weight: 1210 kg • Overall dimensions: 312 × 135 × 140 cm (L × W × H) Additional information: • Machine preserved in its original condition, after technical inspection and preparation for operation • Photos show the actual condition of the machine offered • Free training on machine operation at our company's premises • The price stated in the auction does not include VAT Financing and transport: • We arrange transport using MDD fleet, courier companies, or external carriers • We assist in obtaining leasing or loan financing • Delivery costs depend on the destination and the method of machine transport

Condition: used, Year of construction: 2009, operating hours: 19,648 h, machine/vehicle number: LC666, Used Tetra Pak A3 CF 100V 250 prisma filling line - Year 2009Technical Specifications & Performance DataThis complete carton bottling line is configured for the 250 Prisma format and combines filling, accumulation, straw application and cardboard packing functions in a coordinated industrial packaging process. The line includes equipment manufactured between 2009 and 2012, with the principal filling machine identified as model A3 CF.Filling machine: A3 CF, manufactured in 2009, 100VAccumulator: ACHX30, manufactured in 2010Straw applicator: SA30, manufactured in 2012Cardboard packer: CBP32, manufactured in 2010, 400VProduction format: 250 PrismaIncluded handling equipment: 1 paper trolley set and 2 paper reelsThe configuration is designed around carton handling and secondary packaging rather than bottle processing, making it suitable for industrial packaging applications using Prisma-style carton formats.Advanced Automation & Control SystemsThe line is composed of dedicated processing and packing modules that support a sequential production workflow. The filling machine is specified at 100V, while the cardboard packer is specified at 400V. The accumulator provides a buffer between operations, helping to maintain material flow when downstream equipment requires short interruptions or adjustment time.The straw applicator performs a dedicated packaging operation after filling, supporting a practical carton presentation for end users. Electrical connection and control-system integration should be evaluated during installation to ensure correct synchronization between the individual modules.Production Line Integration CapabilitiesThis used bottling line is arranged as a carton filling and industrial packaging system for the 250 Prisma format. The equipment sequence supports filling, straw application, product accumulation and cardboard packing. The included paper trolley is intended for handling paper reels associated with carton production operations.Machine typeModelYearFilling MachineA3 CF2009Various Equipment - Accumulation SystemACHX302010Various Equipment - Straw ApplicatorSA302012Case PackerCBP322010Various Equipment - Paper Reel TrolleyThe modular layout allows the line to be assessed for integration with upstream product p... Itedpjzvl Uiofx Ac Esk

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED AGAIN!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. This would certainly be of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer, which is a newer, smaller-form-factor HP model. Iedpjzcqy Esfx Ac Eotk Max. diameter: 350mm Max. test piece height: 500mm (higher measurements are possible, up to a maximum of 1000mm when measured in two halves...) Self-centering of the workpiece: +/- 5mm Max. weight of test piece: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. There is also a sample/sample lens (hemisphere) for calibration! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets using a freight carrier. It is already securely fastened to the pallets. The Talyrond 265 and the desk will be well-protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide excellent service for many years to come!!

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 1,000 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: CypCut FSCUT 3000DE, laser type: fiber laser, laser source manufacturer: Reci, laser hours: 1,000 h, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 245 mm, pipe length (max.): 6,000 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 15 bar, Equipment: centralized greasing system, cooling unit, dust extraction, fume extraction, 2 kW Fiber Laser for Sheet Metal Cutting + Pipe Cutting Attachment Ø245 mm – Complete HOYSOOK Set, Model 3015, in Excellent Condition – Used Only for Short Production Test Series, Year of Manufacture: 2024. Manufacturer: HOYSOOK Model: 3015 Year of Manufacture: 2024 Fully Industrial Set Reason for Sale: Change in Production Profile Operating Hours: < 1000 h Description: For sale: Modern fiber laser (2,000 W) for cutting sheet metal and pipes. The machine is in a full industrial configuration, manufactured in 2024, and the laser source has less than 1,000 hours of operation – practically as new. The machine is fully operational and ready for immediate commissioning at its new location. The unit was used exclusively for small batch production and has only gone through the break-in period (picture of the meter available in the gallery). The sale is due to a change in production profile – the device will not be used as frequently as originally planned. Working Parameters: Iodeytccgspfx Ac Eetk • Sheet metal cutting area: 3000 x 1500 mm • Maximum pipe length with attachment: 6000 mm, diameter Ø245 mm • Power supply: 380 V, 3-phase, 50/60 Hz • Positioning repeatability: ±0.03 mm • Maximum cutting speed: 50 m/min • Cutting examples: mild steel up to 12 mm, stainless steel 2 mm, aluminum 1 mm Industrial-Grade Equipment: Mechanics and Drives: • Welded steel bed, hardened and tempered – maximum durability and stability • Gantry beam made of aluminum profiles • Veichi servo motors and drivers • France Moto gear reducer • Taiwanese YYC gear rack • TBI ball screw • HIWIN (Taiwan) or SMAGIC (Japan) linear guides Laser Head and Source: • Raytools BM110 laser head with autofocus and automatic height tracking function • Reci laser source, total hours

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, We offer a complete heating system for sale. The set includes the following equipment: 1. UNICAL Bahr 12 800 boiler from 2020, 2. Riello RL70 burner, 3. Control cabinet with automation, 4. Accessories and water treatment station, 5. Double-walled tanks 2x5000L. Full documentation for the set is available. The entire system is in very good technical condition. All devices are operational and ready for use. The system is suitable for heating a large house or another building. Sale with 23% VAT invoice. If you have any questions or need additional information, please contact us by message or phone. Iodey N Sq Hopfx Ac Eotk

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4DOUG52347, power of the servo motor: 550 W, input voltage: 230 V, clearance between the columns: 261 mm, type of input current: AC, throat depth: 130 mm, pneumatic connection: 6 bar, Professional Production Set of Six JUKI Industrial Sewing Machines from the MASI JEANS Factory This lot consists of six JUKI DDL Series industrial single-needle lockstitch sewing machines, removed directly from the production lines of the former MASI JEANS factory in Estonia. The JUKI DDL-8500 and DDL-8700 Series are among the world's most widely used industrial sewing machines, renowned for their reliability, smooth operation and consistent stitch quality. Designed for continuous production environments, they are an excellent choice for garment manufacturers seeking dependable, high-speed sewing equipment. Because all machines operated in the same factory, this matched production set offers consistent performance, common spare parts, simplified maintenance and identical operating principles, making it ideal for expanding an existing production line or establishing a new sewing department. Bundle Contents Machine 1 Model: JUKI DDL-8700-7 Internal Reference: 6A Machine 2 Model: JUKI DDL-8700-7 Internal Reference: 109A-7078 Machine 3 Model: JUKI DDL-8500 Year: 2002 Internal Reference: 113A-7101 Machine 4 Model: JUKI DDL-8500-7 Year: 2001 Internal Reference: 26B-7049 Machine 5 Model: JUKI DDL-8700-7 Internal Reference: 27B-7088 Machine 6 Model: JUKI DDL-8700-7 Year: 2002 Internal Reference: 28B-7090 Technical Specifications Manufacturer: JUKI Corporation Model Series: DDL-8500 / DDL-8700 Machine Type: Industrial Single-Needle Lockstitch Sewing Machine Country of Manufacture: Japan Maximum Sewing Speed: Up to 5,000 stitches per minute Fully Automatic Lubrication System Complete Industrial Workstations Heavy-Duty Steel Stands Five machines equipped with the JUKI "-7" electronic automation package featuring: • Automatic Thread Trimming • Automatic Backtacking • Automatic Needle Positioning Key Features • Factory-matched production set • Six professional JUKI industrial sewing machines • High-speed, reliable industrial performance • Excellent stitch quality for continuous production • Common spare parts and maintenance procedures • Complete workstations ready for installation • Proven Japanese engineering Applications • General garment manufacturing • Denim and jeans production Itjdpfeznlbyox Ac Ejk • Workwear and uniforms • Shirts and sportswear • Medium-weight woven fabrics • Industrial apparel manufacturing Condition Previously used in professional garment production. All machines remained operational until the scheduled closure of the MASI JEANS factory. Good overall industrial condition with normal cosmetic wear consistent with factory use. Available for inspection before dismantling. Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, loading, transportation, and all associated costs. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machines are offered primarily as one complete factory-matched production set. Individual sales may be considered subject to the prior sale status of the complete lot.

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Iedpfjzvliysx Ac Estk Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,416 h, functionality: fully functional, turning diameter over cross slide: 500 mm, turning length: 630 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 3,500 rpm, total height: 1,720 mm, total length: 2,870 mm, total width: 1,675 mm, overall weight: 4,500 kg, chuck outer diameter: 260 mm, spindle nose: A2-6, Equipment: documentation/manual, rotational speed infinitely variable, The Hwacheon Hi-Tech 200BL is a robust CNC lathe that stands out in practice for its strikingly simple operation. The machine features an intuitive design and predictable performance, making setup and operation feel quickly familiar. A major advantage is the configuration with only an X and Z axis. The lack of additional axes and complex functions keeps the operation clear and efficient. This HWACHEON HI-TECH 200BL machine is standard equipped with: - Chip conveyor + collection bin. - Schunk 3-jaw chuck (ROTA NC Plus 260-86) including various sets of top jaws. - Original HWACHEON and FANUC documentation. Itodpfjyvqw Sex Ac Eok Weight & dimensions: - 4,500 kg - approx. 2870 x 1675 x 1720 mm (LxWxH)

Condition: refurbished (used), Year of construction: 1997, SCHMID T6-200 2 TAUMELPRESSE / NUTATION PRESS Manufacturer: SCHMID Manufacturer location: Rapperswil, Switzerland Model / Type: T6-200 2 Machine No.: T6-200 2 / MK 18166 Itsdpfjzvnr Rox Ac Eek Year of manufacture: 1984 Modernization / rebuild: 1997 Country of manufacture: Switzerland Machine type: Taumelpresse / Nutation Press / Orbital Forming Press Feeding automation: Ridik TECHNICAL DATA Press system: Nutation / orbital forming Nominal press capacity: approx. 200 t / 2,000 kN* Working direction: Vertical Operation: Hydraulic Control: Siemens Operator interface: Siemens SIMATIC OP Operating modes: Setup / manual stroke / single stroke / automatic continuous operation Machine construction: Enclosed industrial forming machine Feeding system: Automatic workpiece feeding, Ridik Hydraulic power unit: Integrated SCHMID hydraulic unit FORMING PARAMETERS / CONTROLS The control panel shows adjustment/control for: Taumelfrequenz: Nutation frequency Umformgeschwindigkeit: Forming speed Presskraft: Pressing force Innenformkraft: Internal forming force Stellungswinkel: Position/setting angle Stösselanschlag: Ram stop / stroke limit Innenform: Internal forming parameters This confirms that this isn't simply a conventional hydraulic press. It is specifically designed for controlled orbital/nutation forming. ELECTRICAL DATA These values are directly from the machine nameplate: Connection voltage: 3 × 400 V Frequency: 50 Hz Connected load: 67 kW Minimum mains fuse: 125 A Control voltage: 230 V AC / 24 V DC Lighting voltage: 230 V AC Electrical schematic No.: 21.10.1660 CONTROL Control manufacturer: Siemens HMI: Siemens SIMATIC OP Control type: PLC controlled Manual machine control panel: Yes Parameter adjustment: Yes Automatic operation: Yes Single-stroke operation: Yes Setup mode: Yes Emergency stop: Yes HYDRAULIC SYSTEM Hydraulic system: SCHMID Hydraulic power unit: Integrated Hydraulic motor/pump assembly: Yes Pressure monitoring: Yes Multiple hydraulic circuits: Yes Hydraulic pressure gauges: Machine mounted Hydraulic oil tank: Integrated

Year of construction: 2020, operating hours: 10 h, condition: like new (used), functionality: fully functional, Automatic line for rinsing, filling, pasteurizing, drying and packaging of glass juice bottles consisting of following modules: 1. SEMI AUTOMATIC DEPALLETIZER (model: Depal 512 – mini) for unpacking glass bottles from pallets, 1 operator required to put the pallet into the machine and remove the cardboard that is inserted in between the glass bottle layers 2. UNIVERSAL RINSING MACHINE (model: IND-Wash 56 S2) for steam sanitizing and hot water rinsing of the bottles before filling 3. ROTARY FILLING MACHINE (model: IND-Dose 46 PO-12) for filling of the hot product into the glass cylinder shape bottles 4. CLOSING MACHINE FOR TWIST OFF CAPS (model: IND-Close 12E) for vacuum closing of the filled bottles using steam injection induced vacuum system 5. PASTEURIZATION AND COOLING TUNEL (model: PT 42-9) for further continuous pasteurization of the product 6. VACUUM TESTING MACHINE (model: IND-Test 61) for selection and eviction of the improperly closed bottles 7. DRYING MACHINE (model: IND-Blow 86) for drying the residual moisture on the battle surface before applying labels Iedjzdr Iljpfx Ac Ejtk 8. LINEAR LABELLING MACHINE FOR APPLICATION OF SELF-ADHESIVE LABELS (model: IND-Lab 32B) with top (over the cap) and side application of the labels on cylindrical bottles 9. AUTOMATIC GROUPING AND SHRINK-WRAPPING MACHINE WITH TRAY AND FILM (model: IND-pack 29 T) for packing the bottles onto cardboard trays in various configurations per different bottle sizes 10. SET OF FLAT TOP CHAIN CONVEYORS (model: IND-Trans 71) connecting the various modules of the line (conveyors between rinsing, filling and closing sections with top covers)

Year of construction: 2022, operating hours: 15 h, condition: used, functionality: fully functional, operation weight: 30 kg, feed force X-axis: 20,000 N, pipe diameter (max.): 14 mm, machine/vehicle number: 79000, Lancier Smart Wheel 2022, used very little Very few operating hours (approx. 38 hours) Includes extensive accessories Includes HONDA EU22i generator Includes cable guiding set 2.6 mm - 3.7 mm Includes cable guiding set 6.7 mm - 9.0 mm Includes drive wheel set without groove 0.8 - 3.4 mm Includes drive wheel set with groove 3.5 - 9.0 mm Includes steel transport box Includes compressed air hose with claw coupling, 10 m The blowing device Automatic logging For cable diameter 1.5 - 9 mm For outer pipe diameter 7 - 14 mm Blowing speed 0 - 100 m/min Thrust force 20 daN Isdpfx Acszphdtj Eotk L x W x H 500 x 400 x 400 mm Weight: approx. 30 kg Order no. 79000

Condition: excellent (used), Year of construction: 2009, operating hours: 8,303 h, functionality: fully functional, machine/vehicle number: 33365B, color channels: 5, paper weight (max.): 600 g/m², paper width (min.): 180 mm, paper width (max.): 520 mm, paper height (min.): 148 mm, paper height (max.): 360 mm, counter reading (color): 13,733,163, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, MAN Roland 50-5 HiPrint five-colour B3 sheetfed offset press, manufactured in 2009. The press is equipped with a control console, connected densitometer and CIP3 system, including the required hardware keys. This configuration offers efficient colour pre-setting and colour control, making the machine suitable for high-quality commercial printing, brochures, leaflets, labels, packaging-related work, and demanding short- and medium-run offset production. The machine has a low total sheet count for its age: approximately 13.7 million impressions. Main technical data: Max. sheet size: 360 × 520 mm Min. sheet size: 148 × 180 mm Max. image area: 350 × 515 mm Printing plate size: 459 × 525 mm Blanket size: 530 × 540 mm Stock thickness: 0.04 – 0.8 mm Printing start: 52 mm Max. speed: 13,000 sheets/hour Frequency: 50 Hz Software language: German Equipment and extras: ProfitPlus Comfort Electronic double-sheet detection Ultrasound double-sheet control at the feeder Blanket washing device with cloth / indirect washing Automatic ink roller wash-up device ATwash cloth system Dosing unit alpha.d Alcosmart alcohol stabilizer Additive dosing unit Carton guide complete with vacuum feed board EPL semi-automatic plate change system Venturi Air Transfer system Technotrans cooling and circulation system with automix device Weko T6 / Grafix 72 Digital Plus powder sprayer Grapho-Metronic register system PQC Plate thickness: 0.15 mm Special value-enhancing extras: manroland control console with monitor and ink-key control CIP3 system with hardware keys Connected densitometer for precise colour control Double-diameter impression cylinders High impression force, suitable for thicker stock and carton work Documentation, installation CDs, spare parts and tools included Counters: Total impressions: approx. 14 million Operating hours: approx. 8,363 hours Inspection and service: The machine has been inspected by Man Roland service in Hungary. It is currently installed in our printing house and can be inspected by appointment in Budapest, Hungary. Advantages and applications: The press is suitable for high-quality commercial printing, brochures, leaflets, labels, forms, packaging-related work and other demanding offset printing applications. Thanks to the double-diameter impression cylinders and high impression force, the machine is also suitable for thicker stock and carton printing up to 0.8 mm. Iedpszbyncofx Ac Ejtk Condition: used, installed, available for inspection Location: Budapest, Hungary Terms: ex works Budapest

Condition: used, Year of construction: 2002, operating hours: 90,000 h, functionality: fully functional, machine/vehicle number: 45028, Dornier 2002 + Stäubli 2688H + 4 IRO/mc, operational, in good condition, 6 sets available. Location: Aleppo, Syria. Iodpfjzurx Sjx Ac Ejtk 1 set of machine and jacquard: 28,000 euros.

Condition: used, Year of construction: 1994, functionality: fully functional, Martin Dickenhobel T 43, 63 cm Year of manufacture: 1994 Isdpfx Aoztz S Ssc Eotk 2 cutterblocks Keyed cutter guards Resharpenable planer knives 5.5 kW motor with brake Electric table height adjustment With digital display 4 feed speeds: 6, 9, 12, and 18 m/min Maximum chip removal: 8 mm Planing width: 2 - 250 mm Rubber infeed and outfeed rollers Dust extraction connection: 160 mm Weight: 1050 kg Includes spare planer knives and knife setting gauge Operating manual

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, brushing unit diameter: 450 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,000 mm, height adjustment type: mechanical, overall weight: 850 kg, extraction nozzle diameter: 80 mm, grinding width: 1,200 mm, ITALMECCANICA Polywood Brush Sander – fully serviced, ready for operation Specification: • Condition – used, fully serviced and calibrated • Manufacturer – ITALMECCANICA • Model – Polywood • Working width – 1200 mm • 4 sanding units: - two side brushes for edge sanding with adjustable angle setting - traversing cross brush (left-right movement) - large cross brush spanning full conveyor width, dia. 450 mm • Brushes with interchangeable strips • Stepless feed speed adjustment – variator • Stepless brush speed adjustment – frequency inverters • Original paintwork • Extraction ports dia. 80 mm • Weight – 850 kg • Year of manufacture – 2003 • CE compliant • Overall dimensions: 230 x 220 x 200 cm (L x W x H) Additional information: • Excellent, factory-level technical and visual condition Itsdpeyfcrxsfx Ac Esk • The photographs show the actual item offered for sale • Machine can be powered up and inspected on site • Listing price excludes VAT and transport costs Financing and transport: • We organise delivery via our own MDD fleet, courier services, or third-party carriers • Financing available by lease or lease loan

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, planing height: 210 mm, spindle diameter: 30 mm, planing width: 260 mm, working height: 210 mm, total width: 2,350 mm, total height: 900 mm, total length: 1,250 mm, chip removal: 100 mm, SCM MiniMax C260E 5-in-1 combination machine Specifications: • Technical condition – inspected, machine ready for operation • Manufacturer – SCM • Model – MiniMax C 260 E • Planer working width – 260 mm • Thickness planer working height – 210 mm • Planer table length – 1250 mm • Motors with a power of 3 x 1.5 kW • Single-phase machine (230V) – option to convert to 3-phase – additional cost of PLN 2000 • Motor brakes • 3-knife shaft for traditional knives • Noise-reducing combs • Manual up/down adjustment • Thickness planer spindle speed – 4200 rpm • Router spindle – 30 mm • Max. blade diameter – 250 mm • Circular saw spindle – 30 mm • Saw blade diameter max. 250 mm • Carriage length – 90 cm • Original paint • Set of safety guards • Dust extraction ports – 100 mm • Weight approx. 300 kg • Year of manufacture – 1998 • Overall dimensions 120 x 235 x 90 cm (L x W x H) Isdpfx Aox Rb Htjc Ejtk Additional information: • The presented photos show the actual condition of the item for sale • Possibility to power on and test the machine on site

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001, Equipment: CE marking, DEKCEL 150 W Industrial CO₂ Laser – Usable Area: 2,650 x 1,450 mm – Complete equipment ready for production Price: €7,500 + VAT For sale: a DEKCEL 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before disassembly. The machine is being sold exclusively due to a technological upgrade following the introduction of new, state-of-the-art RF laser equipment. Equipped with a Ruida DSP industrial controller, RDWorks software, and a fully configured computer, it is ready to start working from day one. It features a large usable working area of 2,650 x 1,450 mm, ideal for machining entire sheets of MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube and also comes with a second, brand-new 150 W RECI laser tube, providing the buyer with significant savings on future maintenance costs. The price includes: • DEKCEL 150 W industrial laser machine. • Usable working area: 2,650 x 1,450 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • CW-5200 industrial chiller. Ijdjzmqaxspfx Ac Eetk • Installed and operational RECI 150 W laser tube. • New spare RECI 150 W laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. The machine can be seen in operation before disassembly, allowing you to verify its performance, precision, and cutting quality. An excellent opportunity to acquire a large-format industrial machine that is fully operational and comes with a significant set of accessories and spare parts, ready to continue production from day one. _____ This is not just a used machine; it is delivered as a complete industrial system with strategic spare parts included, which minimizes maintenance costs and ensures quick start-up.