Used Ott 2513 for sale (1,473)

Condition: excellent (used), Hydraulic Veneer Press with Medium Heating Plates Under-piston design Medium heating plates for connection to the hot water system Central control panel with all operating elements Analog temperature display for the heating plates Pressing pressure can be infinitely adjusted via pressure switch Bsdjy Egkgspfx Akxolg two-stage hydraulic pump Rack compensation Main switch Safety pull cord CE marking Pressing area: 2550 x 1350 mm Opening height: approx. 350 mm Number of pressing cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3,200 kg Note for Used Machines: • Subject to technical changes and prior sale. • All prices quoted are ex-works - free loading! • The machines have been cleaned and functionally tested. • All machines are purchased as seen, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements must be made in writing. (Inquiries will only be answered upon receipt of your address and telephone number!)

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Blodpfjy Aplzex Akxeg Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: excellent (used), Year of construction: 1991, Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Blodpfsyyn Rdjx Akxog Pressing pressure infinitely adjustable via pressure switch Main switch Two-stage hydraulic pump with automatic changeover valve from low to high pressure Safety pull cord Rack compensation CE conformity Pressing area: 2,500 x 1,300 mm Number of press cylinders: 4 Total pressing force: 90 t Stroke height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Space requirement (L x W x H) approx.: 2,900 x 1,250 x 1,900 mm Weight: approx. 3,800 kg Request more information NEW MYLAR FILM on both heating plates NEW hydraulic cylinder seals Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex works – free loaded! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at their location. • Special agreements are only valid in written form. (Your inquiries will only be answered with your address and telephone number!)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Bledpfoxgpaqox Akxog Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: used, Year of construction: 1990, power: 22 kW (29.91 HP), pressing force: 135 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 5,000 kg, empty load weight: 5,000 kg, working width: 1,350 mm, operating pressure: 340 bar, cylinder diameter: 90 mm, opening width: 400 mm, plate width: 1,350 mm, pressure: 340 bar, space requirement height: 2,100 mm, space requirement length: 3,150 mm, space requirement width: 1,500 mm, transport length: 3,150 mm, transport width: 1,500 mm, transport height: 2,100 mm, No. 04516 Veneer press Ott ST 2513/135 Used, year of construction 1990 Aluminium heating plates with protective foil 2550 x 1350 mm LW Total pressure 135 tons Specific pressure 4.4 - 6.0 kg/cm2 6 hydraulic cylinders with diameter 90 mm Maximum operating pressure 340 bar Heating plates electrically heated 2x emergency stop safety line all around Opening width 400 mm, infinitely adjustable 4 heavy longitudinal beams in the press table ensure enormous stability Pull-out material support on the left front side Button control for close - open - stop Total electrical connection approx. 22 kW Transport dimensions approx. 3150 x 1500 x 2100 mm LWH Weight approx. 5000 kg Blsdpfx Aoykt H Rjkxjg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Bljdpfx Akex Dzvxexjg Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Pressing force 90 tons Year of manufacture 1994 Price 7,500.-

Condition: good (used), Year of construction: 1968, functionality: fully functional, Press dimensions: 2550 × 1350 mm Pressing force: 80 t Opening: approx. 400 mm Heating: electric, approx. 10–24 kW Connection: 380 V Bedeyu Sifjpfx Akxolg Weight: approx. 4 t Design: electrohydraulic, 4 cylinders Robust construction Ideal for veneer work and panel gluing Gold anodized plates Ex works The machine is in good and well-maintained condition for its age. Solid industrial quality – durable and reliable. Shipping available at extra cost!

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, Veneer Press JU 60 Press size: 2200 x 1200 mm Heating plate damaged (see photos), heating plate is functional Year of manufacture: 1965, heating 12 kW Bodsmhguaspfx Akxjlg Loading costs extra (forklift rental approx. €500) Transport available at additional cost!

Condition: used, Year of construction: 1991, Plate size: 3600 x 1350 mm Total pressing force: 160 t Specific pressing force: 3.5 - 5.0 kg/cm² Max. operating pressure: 320 bar Press cylinders: 8 x 90 mm St/DM Opening width: 400 mm Weight approx.: 8,300 kg Dimensions: 4130 x 1520 x 2150 mm Function tested = new cover plates (gold anodized) Storage location: Supplier Blodpfoy Hrzmex Akxjg

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Blsdpfxevvkfqo Akxjg

Condition: used, working width 750 mm working length 3.000 mm length ~ 3.850 mm width ~1.000 mm height ~ 2.000 mm Hydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function. Bljdpfsy Erymex Akxjg

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Blsdpey E Iycsfx Akxeg Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: ready for operation (used), Year of construction: 2000, overall weight: 2,000 kg, Edgebander manufactured in 2000. This OTT Pacific V6-F features an edge thickness capability of 0.2 - 6 mm and can handle workpiece thicknesses from 8 to 42 mm. It operates at a feed speed of 12 m/min and includes various processing units such as joining mills, a gluing unit, and a polishing unit. If you are looking to get high-quality edge banding capabilities, consider the OTT Pacific V6-F machine we have for sale. Contact us for further details. • Condition: Not rebuilt – sold without warranty • Edge thickness: 0.2–6 mm • Workpiece thickness: 8–42 mm • Workpiece width: min. 70 mm • Workpiece length: min. 150 mm • Feed speed: 12 m/min • Electrical connection: 3 x 400 V, 50 Hz • Exhaust connection: 2 x Ø 120 mm at 20 m/sec • Exhaust capacity: 30 m³/hProcessing units and features (part of the machine) Bledpfx Aksy Df Uujxsg • Joining mills: 2 x 1.5 kW, 12,000 rpm, 200 Hz; two application-controlled work spindles • Gluing unit: Rapid-heating tank with Melt-matic; automatic edge magazine with optical monitoring (for strip edges in fixed lengths) • Release agent spray system • Crosscut unit: 2 x 0.2 kW, 12,000 rpm, 200 Hz; automatic swivel 0°/3° • Flush milling unit: 0°/15°/30°/45°; 2 x 0.43 kW, 12,000 rpm, 200 Hz • Radius milling unit: R2–R5; 2 x 0.3 kW, 12,000 rpm, 200 Hz • Corner rounding milling unit: 2 x 0.3 kW, 12,000 rpm, 200 Hz • Quick-change stations: 2 for milling units • Scrapers: 2 x carbide scrapers • Polishing unit: 2 x 0.2 kW, 2,800 rpm, 50 Hz Additional equipment • None included or specified beyond the machine’s built-in units and features.

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Bedpoyyyftofx Akxslg Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7808 Blodpfeyh H Aqsx Akxsg TECHNICAL DATA Max. working width: 1100 mm Max. working height: 160 mm 2 Units: 1) Grooved rubber roller for calibration 2) Rubber roller + shoe + steel roller – Top section: 2 steel rollers, slip type Units: Cleaning brush – Bottom section: Feed belt Pneumatic belt oscillation with photocells Electric table lifting 2 feed speeds: 1.1 kW Main motor: 15 kW with pneumatic brake Additional pneumatic shoe Operating pressure: 6-8 bar Extraction connection diameter: 2x160 mm, 1x120 mm Overall dimensions (L/W/H): 2700x2100x2200 mm Approximate weight: 3000 kg – German-made – 2 working units – Additional pneumatic shoe included – Unpainted – Used wide belt sander in very good condition Net price: 35,900 PLN Net price: 8,550 EUR (depending on exchange rate 4.2 EUR) (Prices subject to variation due to currency fluctuations)

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, power: 12.6 kW (17.13 HP), workpiece height (max.): 50 mm, edge thickness (max.): 15 mm, feed rate X-axis: 22 m/min, overall weight: 3,200 kg, year of last overhaul: 2024, Ott Shark Edgebander for PUR The machine is fully functional and can be viewed and tested on site! The machine was completely overhauled by a specialized company 2 years ago! Equipment: - Angle stop for small parts - Release agent spray unit - Joint trimming unit - Pressure unit - Crosscut saw - Profile trimming unit - Profile milling unit (R2) - Radius scraper blade - Corner copying unit - Flat scraper blade - Polishing station (oscillating) Additionally included: - PUR glue pot - EVA glue pot - Service station with vacuum box and cleaning/boiling station Bedpfxjy H Dx Do Akxelg

Condition: used, table width: 1,400 mm, table length: 2,800 mm, total length: 6,600 mm, total width: 2,500 mm, total height: 2,600 mm, No. 3266 Feed-through veneer press Ott D 99 Used Short-cycle feed-through veneer press Pressing surface 2600 x 1400 mm LW Maximum opening width 150 mm Specific pressure 5.0 - 6.0 kg/cm2 Infeed conveyor belt, length 2800 mm Outfeed conveyor belt, length 2800 mm Transport dimensions approx. 6600 x 2500 x 2600 mm LWH Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Blsdpfx Asy A Rhkskxeg Terms of delivery: Ex location

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, Max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec Feed speeds: 4 + 8 m/min Main sanding unit motor power: 11 kW, thickness adjustment: 0.55 kW, feed belt: 1.3/1.8 kW Operating pressure: 6 bar, air consumption: 10 l/min, extraction ports: 1 x 150 + 1 x 120 mm Bljdpfxoy Icnas Akxsg LxWxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, 90° Shore hardness - Air sanding pad with automatic engagement and disengagement - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by sanding unit - Automatic centering of feed belt - Feed belt with high-quality perforated rubber mat and automatic belt centering - Pneumatic sanding belt tensioning with length compensation - Contactless electronic sanding belt oscillation - Low-wear disc brake system for instant stop of the sanding belt drive with pressure monitor - Motorized thickness adjustment with digital display - Workpiece thickness limiter at infeed - Semi-automatic workpiece thickness adjustment - 4-way grit thickness compensation for contact roller Special accessories: - Workpiece thickness measuring device

Condition: used, Year of construction: 1978, used Manufacturer: Ott Type: JU60 Year of manufacture: 1978 Machine no.: 10838 GS-certified Panel size: 2200 x 1100 mm Maximum opening: 300 mm Tip control Safety rope Electric heating Piston diameter: 80 mm 4 lower pistons Required space approx. 2600 x 1300 x 1900 mm Location: 97447 Gerolzhofen, free loaded, unpacked Transfer as seen, in current condition No warranty or guarantee Bedpfxjy H N Tgo Akxolg

Condition: excellent (used), workpiece height (max.): 60 mm, edge thickness (max.): 10 mm, height adjustment type: electric, total length: 7,200 mm, overall weight: 3,500 kg, Equipment: CE marking, OTT edge banding machine, model Twister Jointing / cutting, flush trimming, longitudinal milling, corner copying (AKF), scraper blades R2/R1mm, surface scrapers, cloth disc unit. Spare slot for grooving unit. All spray nozzles, separator, lubricants, cleaning agents. Beckhoff control, each frequency inverter individually driven! Setup within the machine gap. Narrow-part shuttle. Demonstration available by arrangement. Bodpfx Aey D Sm Rokxslg Machine available immediately. Sale in DACH region with warranty.

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!) Blsdsych Igjpfx Akxjg

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Bjdpfx Aogmn H Askxelg

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, Ott JU 2511 Hydraulic veneer press with electric heating plates Gold eloxal electric heating plates Two-stage hydraulic pump with automatic switching valve from low to high pressure Safety tear-off cord Rack compensation CE compliant Bledpfoy Hbw Rox Akxog Pressing area: 2500 x 1100 mm Number of press cylinders: 4 Total pressing force: 70 t Lift height: 400 mm Operating voltage: 3 x 400 V + N, 50 Hz Total power consumption: approx. 16.1 kW Dismantlable design Space requirement (L x W x H) approx.: 2960 x 1250 x 1955 mm Weight: approx. 2900 kg Year of manufacture: 1998 Price: €6,500 • Technical data subject to change and prior sale reserved. • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machine on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: good (used), Year of construction: 2020, DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available Bljdsyxcmqopfx Akxjg -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point Blodpfxsymmgis Akxeg