Linde h 35 d for sale
Augustdorf, Germany
![]()
dealership location
6474 km
2015
ready for operation (used)
Type of drive Diesel capacity 3000 kgCentre of gravity 500Available at short noticeCondition visually very goodCondition technically very goodMast type DuplexHub height 3115 mmFree lift 1424 mmForks Length 1200 mmSpecial equipment 3. ValveWorking lights rearWorking lights frontSemi-cabinSmoke filterFull-free-strokeSpecial equipment Description Flashing light, wide tyres, wide fork carrier, restraint systemWorking height 2190 mmFront tyres type SuperelasticRear tyres type SuperelasticGetriebe Hyd... more
|
Fürstenfeldbruck, Germany
![]()
dealership location
6817 km
2006
good (used)
|
Gondelsheim, Germany
![]()
6603 km
1998
excellent (used)
Linde H70 Type 353 Forklift Gas Forklift Front Forklift BJ 1998
Zjjexndq
Payload 7000KG 7to, triplex mast - lifting height ca 5,5m
7806 original operating hours
Net weight ca 11t
Good general condition, stacker is tight, no oil loss etc.
Fork length 150cm, ride great.
Pick up in 75053 Gondelsheim or shipping by freight carrier possible. more
|
Augustdorf, Germany
![]()
dealership location
6474 km
2018
ready for operation (used)
Type of drive Electrical load capacity 3500 kgCentre of gravity 500 Available at short noticeCondition visually mintCondition technically mintMast type TriplexHub height 4380 mmFree lift 1295 mmForks Length 1200 mmSpecial equipment 3rd valve4. ValveWorking lights rearWorking lights frontHeatingSTVZO approvalFull cabWorking height 2065 mmFront tyres Type SuperelasticRear tyres Type SuperelasticDescription 3rd valve, 4th valve, Working lights rear, Working lights front, Heating, STVZO, Full cabBat... more
|
Augustdorf, Germany
![]()
dealership location
6474 km
2018
ready for operation (used)
Type of drive Electrical load capacity 3500 kgCentre of gravity 500 Available at short noticeCondition visually mintCondition technically mintMast type TriplexHub height 4380 mmFree lift 1295 mmForks Length 1200 mmSpecial equipment 3rd valve4. ValveWorking lights rearWorking lights frontHeatingSTVZO approvalFull cabWorking height 2065 mmFront tyres Type SuperelasticRear tyres Type SuperelasticDescription 3rd valve, 4th valve, Working lights rear, Working lights front, Heating, STVZO, Full cabBat... more
|
Kern 3500
inserter with a speed of 22.000 env/h
envelope sizes: DL,C6/5, C6, C5
Feeder K971 DAT (OCR)
2 enclosures ZSEG+ZSMS for 4 stations
3 check bins, vertical stacker
available imm ex site USA
was under Kern maintenance
K7fsd
option
cutter merger K990/940 as either/or channel
HSW post box system
50 Hz + 60hz possible more
|
Numerical control: HEIDENHAIN TNC-i530
Technical features
Dimensions
Table dimensions: 5000 x 2000 mm
Number of T slots: 13
T slots dimensions: 22 mm
Traverses of axis
X axis traverse: 5000 mm
Y axis traverse: 3250 mm
Z axis traverse: 1000 mm
Distance between columns: 2720 mm
Milling head
Head type: 1- Universal manual (UM40) 2- Direct exit
Tool clamping system: Hydraulic
Taper nose: ISO 50 / DIN69871
Speed range: 3000 r.p.m.
Spindle power: 37 kW / 582 Nm
Feedrat... more
|
Make LAUDA, Type IT HW 350-Ex, Temperating machine , Extra Specifications 20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., manufactured in 2003, Serial number B17 275, CE 0036 certified. Control cabinet also for Lauda process heaters 900WP037 and 900WP038 What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping... more
|
Tilting cylinder manufacturer: Hyva HollandType: F0183-5-09000-000Maximum pressure: 170 bargesetzl. VAT is to be deposited with export outside the EU as a deposit, ALL INFORMATION WITHOUT WARRANTY, INTERMEDIATE SALES IRRTUM RESERVED - condition for the conclusion of a sale is a business-commercial activity of the buyer and its corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association... more
|
Düsseldorf, Germany
![]()
dealership location
6384 km
2013
used
Vehicle data - Make: Linde - Type: H16T-01 // HH 6.470 mm / Sideshift / Triplex / good condition - Type of drive: LPG - Load capacity: 1600kg - Centre of gravity: - Lifting height: 6470 mm - Range: 0 mm - Year of construction: 2013 - Hours of operation: 13181 - Internal no.E0429 _____ Mast data - Mast type: Triplex - Lifting height: 6470 mm - Height: 2830 mm - Free lift: 0 mm - Fork carriage: 0 mm - Forks: 1200 x 0 x 0 mm _____ Dimensions - Length: 0 mm - Width: 0 mm - Height: 2830 mm - Weight: ... more
|
|
Wiefelstede, Germany
![]()
dealership location
6377 km
1952
used
|
Valkenswaard, Netherlands
![]()
6292 km
2019
new
Parweld XTT 353P Ac / Dc Pulse Water cooled.
The XTT 353P AC / DC Pulse TIG Welding Machine is the successor of the XTI 353P AC / DC.
AC / DC Output
The XTT 353P is an AC / DC TIG welding machine and can be used for welding all steels, stainless steel, titanium and aluminum.
TIG Welding
The square wave AC and digital pulse function increase the productivity to the maximum, reducing the heat input.
MMA Welding
Thanks to the square wave with adjustable frequency, the burn-in is reg... more
|
Make LAUDA, Type IT HW 350-Ex, Temperating machine , Extra Specifications 36kW Lauda process heater , power consumtion 38,7 kW, 55,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h, pressure 10 bar, manufactured in 2003, Serial number B17 277, dimensions 1.540 mm Length, 650 mm Wide, 1.610 mm height, CE 0036 certified , EX II 2 EEx edm [ia] IIC T3 , heat transfer fluid water. For control cabinet see 900WP034 What you can expect from Foeth: all our machin... more
|
Used combination cylinder, spring-loaded cylinder manufacturer: Knorr-Bremse is suitable for various typesCondition for the purchase is a business activity of the buyer and its corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery are made exclusively on the basis of our General Terms and Conditions:www.autogilles.de/agbMarke:: [Other]... more
|
Italdibipack NUR 75 cm Platzbedarf LEONARDO KVK 2000T wickelt 235cm hoch
Pulheim, Germany
![]()
6395 km
2019
good condition (used)
If you have any questions, please do not hesitate to contact us by e-mail.
Our MobilWrapper is a demonstration unit, production year 2018, fully maintained and tested, good condition, slight scratches on housing and chassis, with warranty and optional accessories such as battery upgrade for a double power, etc. at extra cost.
For a delivery outside of Germany, we will gladly make you a separate offer.
- Working area of ONLY 750 mm around the pallet!
- Winding height up to 2,350 mm
Npz7p
- W... more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
Pipe sealing bag, leak-tight cushion, sealing plate, pipe seal
-Rohrdichtkissen
-Outside / inside Ø 350/273 mm
Bfme8yhzyf
-Height 58 mm
-2x pillows available
-Price per piece
-Weight 5.8 kg / piece more
|
hole punhing press: pressure 35,0 t
output 28 in 10 mm
L-beam 80 x 8,0 mm
square edge steel 28,0 mm
round bar steel 30,0 mm
flat steel 150 x 10 mm
total power requirement 1,5 kW
Bfed7tusnw
weight of the machine ca. 800 kg.
range L-W-H 800 x 1.200 x 1.750 mm more
|
Düsseldorf, Germany
![]()
dealership location
6384 km
2001
used
Vehicle data - Make: Linde - Type: L10 // HH 3000 mm/ Duplex mast / Free lift 1490 mm - Drive type: Electric - Load capacity: 1000kg - Load centre: - Lifting height: 3000 mm - Range: 0 mm - Year of construction: 2001 - Operating hours: 3279 - Internal No.C0383 _____ Mast data - Mast type: Duplex - Lifting height: 3000 mm - Height: 1930 mm - Free lift: 1490 mm - Fork carriage: 0 mm - Forks: 1150 x 180 x 60 mm _____ Dimensions - Length: 0 mm - Width: 0 mm - Height: 1930 mm - Own weight: 985 kg ___... more
|
Make LAUDA, Type IT HW 350-Ex, Temperating machine , Extra Specifications 20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., pressure 10 bar, heat transfer fluid water, manufactured in 2003, Serial number B17 276, CE 0036 certified , EX II 2 G EEx edm [ia] IIC T3. For control cabinet see 900WP034 What you can expect from Foeth: all our machines are in working condition, and at a reduced price com... more
|
Used engines MAN type D 2156 to D 2356 multiple available, 6 cylinders, condition for the purchase conclusion is a business-commercial activity of the buyer and their corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery will be made exclusively on the basis of our GTC:www.autogilles.de/agbMarke:: MANModel: D 2156 - D 2356 - 6 Cylinder... more
|
If you have any questions, please do not hesitate to contact us by e-mail.
Our MobilWrapper is a demonstration unit, production year 2018, fully maintained and tested, good condition, slight scratches on housing and chassis, with warranty and optional accessories such as maintenance contract, battery upgrade for a double power, etc. at extra cost.
For a delivery outside of Germany, we will gladly make you a separate offer.
- Working area of ONLY 750 mm around the pallet!
- Winding height up... more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
Gauge Steel, Gauge Mandrel, Gauge, Mandrel, Gauge
Hlx2wf3xa
-Measurements 3/4/5/6/7/8/9/10/12/14/15/25/53 mm
-various manufacturers
-List in the photos
-will only be sold completely
-Weight 4.5 kg more
|
saw blade diameter 350 x 32 mm
cutting diameter 120 mm
cutting range 200 x 88 mm
stroke 180 mm
mitter cutting - all-position 45 °
turning speed range 1.800 / 3.600 U/min
power requirement 1,5 / 1,8 kW
voltage 400 V
total power requirement 2,0 kW
weight of the machine ca. 215 kg
dimensions of the machine ca. 0,60 x 0,90 x 1,70 m
roller conveyor 2,35 x 0,45 m (mit Anschlag)
roller conveyor 2,10 x 0,22 x 0,90 m
Bfu2rq22s8
- mitter cutting ± 45°
- roller conveyor
- coolant equipment more
|
Düsseldorf, Germany
![]()
dealership location
6384 km
2002
used
Vehicle data - Make: Linde - Type: L10 // HH 3000 mm/ Duplex mast / Free lift 1490 mm - Drive type: Electric - Load capacity: 1000kg - Load centre: - Lifting height: 3000 mm - Range: 0 mm - Year of construction: 2002 - Hours of operation: 4623 - Internal no.C0384 _____ Mast data - Mast type: Duplex - Lifting height: 3000 mm - Height: 1930 mm - Free lift: 1490 mm - Fork carriage: 0 mm - Forks: 1150 x 180 x 60 mm _____ Dimensions - Length: 0 mm - Width: 0 mm - Height: 1930 mm - Own weight: 945 kg ... more
|
turning diameter 350 mm
W7i8g
turning length 1000 mm
swing diameter over bed slide 350 mm
total power requirement 3 kW
weight of the machine ca. 1,3 t
dimensions of the machine ca. m more
|
Used clutch slave cylinder manufacturer: Knorr-BremseFitting for ZF AS-tronic transmissionCondition for the purchase is a business activity of the buyer and its corresponding proof. After completion of the purchase process, please send us proof of your business activity (e.g. VAT identification number, trade licence or association or chamber identity card). Sale and delivery will only take place on the basis of our General Terms and Conditions:www.autogilles.de/agbMarke:: [Other]Model: Knorr-Bre... more
|
Oldenburg, Germany
![]()
dealership location
6390 km
2012
used
Vehicle data - Make: Linde - Type: H35D - Drive type: Diesel - Load capacity: 3500kg - Load centre: - Lifting height: 5180 mm - Range: 0 mm - Year of construction: 2012 - Hours of operation: 4392 - Internal no.D3764 _____ Mast data - Mast type: Standard - Lifting height: 5180 mm - Height: 3220 mm - Free lift: 0 mm - Fork carriage: 1150 mm - Forks: 1600 x 120 x 50 mm _____ Dimensions - Length: 2800 mm - Width: 1250 mm - Height: 3220 mm - Own weight: 5300 kg _____ Battery
Beysgc32fc more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
Air cooler, evaporator, cold store, refrigerated container, refrigerated cell
with 3x fans
Rx738ypvq
Fan diameter 500 mm
Blade spacing 10 mm
Housing made of stainless steel
-Abtropfwanne
-5x air cooler available
Prize piece
Dimensions 3570/1100 / H940 mm
-Weight 534 kg / piece more
|
Make Netzsch, Type LMJ 35 (Fig. 506.39), No 204 896, New 1988, Horizontal sand mill (1x), Capacity 35 Ltr., House sizes ± dia. 250x850mm, With jacket , Motor 36 KW, 380/660 Volt (Ex), Floorspace 2,1x1,1 M, Total height 2,1 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for mor... more
|
Hamburg, Germany
![]()
dealership location
6484 km
2009
used
Vehicle data - Make: Linde - Type: H35T - Drive type: LPG - Load capacity: 3500kg - Load centre: 500 - Lifting height: 3100 mm - Range: 0 mm - Year of construction: 2009 - Hours of operation: 19615 - Internal no.2039a _____ Mast data - Mast type: Standard - Lifting height: 3100 mm - Height: 2200 mm - Free lift: 0 mm - Fork carriage: 1150 mm - Forks: 1200 x 125 x 45 mm _____ Dimensions - Length: 2940 mm - Width: 1260 mm - Height: 2200 mm - Own weight: 4990 kg _____ Battery
Bbv2wf8207 more
|
7.5 kWPlasticsWoodOtherMachine number: 9232Rotor diameter 320 mm Working width 600 mm Number of rotor blades: 30, offset 2 rows of stator blades Inlet cross-section approx. 300 x 600 mmCutting mill with noise protection box and noise protection funnelCutting mill with slow-running rotor (approx. 150 rpm) Suitable for sprues, reject parts, punching grids, blow mould waste
Vssxia more
|
We exhibit: Nortec 202021.01.2020-24.01.2020Hall A1, Booth 219factorynew CNC cycle lathes manufacturer STYLE-Holland available types STYLE350 / STYLE510 / STYLE650 / STYLE750 / STYLE1000 / SYLE1200 with CNC control STYLEConceived for single parts and small seriesEasy and intuitive operationModern and ergonomic design7 models with turning diameter of 300 - 1200 mmPoint widths between 500 and 5000 mmPrecise double prisms GuideStable cast iron bed Full cladding with CE markingOptimum accessibility ... more
|
Oldenburg, Germany
![]()
dealership location
6390 km
2012
used
Vehicle data - Make: Linde - Type: H35D - Drive type: Diesel - Load capacity: 3500kg - Load centre: - Lifting height: 5180 mm - Range: 0 mm - Year of construction: 2012 - Hours of operation: 4483 - Internal no.D3762 _____ Mast data - Mast type: Standard - Lifting height: 5180 mm - Height: 3220 mm - Free lift: 0 mm - Fork carriage: 1150 mm - Forks: 2400 x 120 x 50 mm _____ Dimensions - Length: 2800 mm - Width: 1250 mm - Height: 3220 mm - Own weight: 5300 kg _____ Battery
Beysfzlvrb more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
|
Pulheim, Germany
![]()
6395 km
2019
good condition (used)
If you have any questions, please do not hesitate to contact us by e-mail.
This is a new mobile winder, model year 2019, original packaging, with manufacturer's warranty and on request with optional accessories such as BatterieUpgrade for a double performance against surcharge possible.
For a delivery outside of Germany, we will gladly make you a separate offer.
- Working area of ONLY 750 mm around the pallet!
Coqdyox
- Winding height up to 2,350 mm
- Wide strap
- Extremely compact design
-... more
|
Düsseldorf, Germany
![]()
dealership location
6384 km
2012
used
Vehicle data - Make: Linde - Type: H70T-01 // HH 3.450 mm / Sideshift - Type of drive: LPG - Load capacity: 7000kg - Centre of gravity: - Lifting height: 3450 mm - Range: 0 mm - Year of construction: 2012 - Hours of operation: 4196 - Internal no.E0596 _____ Mast data - Mast type: Standard - Lifting height: 3450 mm - Height: 2900 mm - Free lift: 0 mm - Fork carriage: 0 mm - Forks: 1200 x 0 x 0 mm _____ Dimensions - Length: 0 mm - Width: 0 mm - Height: 2900 mm - Weight: 11455 kg _____ Battery
Gvtr... more
|
7.5 kWPlasticsMachine number: 9232Inlet cross section: approx. 500x620mm, rotor diameter: 350mm Rotor width: 620mm 33 Rotor knife 2 Stator knife
Bfsjdntsok more
|
Hamburg, Germany
![]()
dealership location
6484 km
2003
used
Vehicle data - Make: Linde - Type: H35D - Drive type: Diesel - Load capacity: 3500kg - Load centre: 500 - Lifting height: 3530 mm - Range: 0 mm - Year of construction: 2003 - Hours of operation: 15551 - Internal no.3145 _____ Mast data - Mast type: Standard - Lifting height: 3530 mm - Height: 2400 mm - Free lift: 0 mm - Fork carriage: 1170 mm - Forks: 1600 x 150 x 50 mm _____ Dimensions - Length: 2600 mm - Width: 1250 mm - Height: 2400 mm - Own weight: 4660 kg _____ Battery
Bey2ezh9le more
|
Oldenburg, Germany
![]()
dealership location
6390 km
2012
used
Vehicle data - Make: Linde - Type: H35D - Drive type: Diesel - Load capacity: 3500kg - Load centre of gravity: - Lifting height: 5180 mm - Range: 0 mm - Year of construction: 2012 - Operating hours: 6495 - Internal No.D3763 _____ Mast data - Mast type: Standard - Lifting height: 5180 mm - Height: 3210 mm - Free lift: 0 mm - Fork carriage: 1150 mm - Forks: 1600 x 0 x 0 mm _____ Dimensions - Length: 2800 mm - Width: 1250 mm - Height: 3210 mm - Own weight: 5300 kg _____ Battery
Mnitfp7a more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
Pipe sealing bag, leak-tight cushion, sealing plate, pipe seal
-Rohrdichtkissen
-Outside / inside Ø 350/160 mm
Nph8p
-Height 63 mm
-Weight 13,9 kg more
|
Italdibipack NUR 75 cm Platzbedarf LEONARDO KVK 2000T wickelt 235cm hoch
Pulheim, Germany
![]()
6395 km
2019
excellent (used)
If you have any questions, please do not hesitate to contact us by e-mail.
Our MobilWrapper is a demonstration unit, production year 2018, fully maintained and tested, good condition, slight scratches on housing and chassis, with warranty and optional accessories such as maintenance contract, battery upgrade for a double power, etc. at extra cost.
For a delivery outside of Germany, we will gladly make you a separate offer.
- Working area of ONLY 750 mm around the pallet!
- Winding height up... more
|
|
Make Linden, Type K II 35, No 380, New 1959, Material brass, Material Brass, Z-blade mixer (1x), Capacity 50 Ltr., Trough sizes 450x360x310mm, With cover , With jacket , Double geared , With adjustable packing glands , Without motor , Manual operated tilting , Floorspace 1,4x0,7 M, Total height 1,5 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspec... more
|
Hamburg, Germany
![]()
dealership location
6484 km
2006
used
Vehicle data - Make: Linde - Type: H35T - TRIPLEX - Drive type: LPG - Load capacity: 3500kg - Load centre: 500 - Lifting height: 5650 mm - Range: 0 mm - Year of construction: 2006 - Operating hours: 8227 - Internal no.2899c _____ Mast data - Mast type: Triplex - Lifting height: 5650 mm - Height: 2550 mm - Free lift: 1740 mm - Fork carriage: 1335 mm - Forks: 1200 x 150 x 50 mm _____ Dimensions - Length: 2940 mm - Width: 1330 mm - Height: 2550 mm - Own weight: 5155 kg _____ Battery
Ptyuwm more
|
Wiefelstede, Germany
![]()
dealership location
6377 km
used
Pipe sealing bag, leak-tight cushion, sealing plate, pipe seal
-Pipe sealing bag
Npkcj
-Outside / inside Ø 198/135 mm
-Height 32 mm
-Weight 1,6 kg more
|
|
Warstein, Germany
![]()
6472 km
ready for operation (used)
HEIDENHAIN logic unit Type: LE 355 B Id.Nr. 237 660 99incl..: Control loop card 238 289 01 and computer 237 930 01Condition: used / usedThis offer is aimed at commercial persons.prices are net.we would be happy to create a personal offer for you.please send us your complete contact details.offer subject to confirmation, subject to prior sale.internal no.: 1294
Bfwcxj8qcn more
|
|