Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
3
saw blade diameter 350 mm cutting diameter 100 mm mitre joint cuts -/+ degrees 45 ° total power requirement kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,1 x 1 x 1,8 m Bwtgjcx • pneumatical clamping device more
6
Technical data: Fu8o2l0ds -Manufacturer: Rurack Type: VS 300 -BJ. CA. 1995 Saw blade up to at least 300 mm -with water cooling MITRE cut possible -Vertikale precision guidance Weight approx. 400kg -2 Geschwndigkeitsstufen -16A power more
4
saw blade diameter: 250 mm cutting diameter: 60 mm stroke : 170 mm revolution per minute: 57 U/min Yimkfae2w total power requirement: 0,8 kW weight of the machine approx.: 71 kg space requirements of the machine approx.: L:0,8 x B:0,45 x H:1,0 m cutting area with 90°: pipe: 80mm; Flat:95x60mm; cutting area with 45°: pipe: 70mm; Flat:65x60mm mitre cut is possible workpiece holder mechanic Machine is on sale as is with bearing damage. spare part deliverer or repair! more
6
Cold saws EISELE MOD: VMS II 033 B: 1975 Pole-reversible motor - 1.4 / 1.9 kW Ptlkem Cutting speeds - 40 / 80 RPM Blade dimensions - 275 mm Cutting area round 90 mm diameter more
4
circular saw Eisele VDE 530 Technical specifications: 380 / 220V 1.66 / 29A Gviepo RPM 2720 Dimensions: H1350 x B780 x T1450 more
1
saw blade diameter 275 mm cutting diameter 90 mm stroke 120 mm mitter cutting - all-position 90-30 ° turning speeds 40/80 U/min total power requirement 1,4 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,8x0,9x1,3 m Efn9sqzfw more
3
saw blade diameter 275 mm cutting width 70 mm Cutting height 85 mm Cutting height at 45° 70 mm cutting capacity - flat 95 x 60 / 90° mm cutting capacity - round 85 / 90° mm cutting capacity - square 70 x 70 /90° mm Oqbci7cb cutting capacity - flat 70 x 55 / 45° mm cutting capacity - round 70 / 45° mm cutting capacity - square 60 x 60 /45° mm saw blade turning speeds 60 + 120 U/min voltage 400 V / 50 Hz Motor output 1,0 / 1,4 kW machine weight ab. 250 kg Dimensions (L/W/H) 980 x 790 x 780 mm ... more
2
Metal circular saw Fabr. ROHBI type RKH 51 Masch.# 51168/71 built in 1971 Technical data: Saw blade diameter of Max 250 mm Power 1,5 / 2,0 PS with -Cooling device -Quick vise Gvh8t8 -Präz.-stroke 750 mm -in the frame of built-in cooling device -way-adjustable length stop used from Uni operation, in very good condition more
3
saw blade diameter 200 mm cutting diameter 50 mm stroke 70 mm total power requirement 3,00 kW weight of the machine ca. 1,00 t dimensions of the machine ca. 1,00 x 1,00 x H1,80 m Qmbys7woa more
5
Cold saws, metal cutting circular saws, metal cutting saw -Max saw blade ø 315 mm-with coolant system Bagdj3nsoq Blade speed 40/80 U/min Cutting range 90 ° flat 100 x 75 mm cutting capacity 45 ° flat 40 x 75 mm-schwenkbar Dimensions 1030/560/H1700 mm Weight 222 kg more


Cold circu...
every day

New machines via email!

Be informed!
4
saw blade diameter: 220 mm cutting diameter: - mm stroke : - mm cutting range 90 degrees: round: Ø 70 mm cutting range 90 degrees: flat: 120x30 mm cutting range 90 degrees: square: 60x60 mm cutting range 45 degrees: round: Ø 60 re/li mm cutting range 45 degrees: flat: 100x30 re/li mm cutting range 45 degrees: square: 50x50 re/li mm feed - manual: per Hand mm cutting speed: manual per Hand m/min total power requirement: 0,8 kW machine weight ab.: 77,0 kg dimensión lower frame: L:0,72 x B:0,50 x ... more
1
saw blade diameter 500 x 50 mm cutting diameter 170 mm turning speeds 3000 U/min reus variabel einstellbar U/min capacity 90 degrees: round 170 mm capacity 45 degrees: round 140 mm capacity 90 degrees: square 150 mm capacity 45 degrees: square 120 mm capacity 90 degrees: flat 300 x 125 mm capacity 45 degrees: flat 145 x 120 mm voltage 400 V / 50 Hz total power requirement 4 kW weight of the machine ca. 500 Kg 3n9yjgnfw dimensions of the machine ca. 0,8 x 0,7 x 1,3 m • Cold circular saw for a... more
2
Manual cutting machine complete with HSS blade Ø 250 mm for cutting metals, with head tilting in the range 0° - 45° towards left. Practical and suitable for any kind of cutting. Balv7vupb2 more
2
saw blade diameter NA mm cutting diameter NA mm stroke mm working area 90 mm workpiece dia. 90 x 500 mm feed: 500 mm total power requirement kW Bhjfa2fgk weight of the machine ca. t dimensions of the machine ca. m more
4
Circular cold saw, metal saw, saw blade Metallkappsäge Durchmesser275 mm-speeds 40/80 1/min-Coolant equipment Qktoqwmot more
4
diameter of saw blade 260 mm cutting range - flat 90° - 160 x 65 mm - round 90° - 90 mm mitre adjustment 45° cutting speeds 16 / 32 - 20 / 40 - 25 / 50 rpm coolant device longitudinal stop 3,000 mm Yxdymq7nt electrical data 380V / 1.1 / 1.4 KW space requirements width - 700 x depth - 900 x height - 1,500 mm weight approx. 380 kg           more
4
TECHNICAL DATA: Saw blade diameter max mm: 225 Bawlfrpmo3 Vise opening mm: 85 Motor HP: 1,2 Rotation speed rpm: 54 Weight Kg: 60 more
1
saw blade diameter 500 x 50 mm cutting diameter 130 mm turning speeds 3000 U/min reus variabel einstellbar U/min Wy28fcb0f capacity 90 degrees: round 180 mm capacity 45 degrees: round 180 mm capacity 90 degrees: square 150 x 150 mm capacity 45 degrees: square 120 x 120 mm capacity 90 degrees: flat 300 x 125 mm capacity 45 degrees: flat 145 x 120 mm voltage 400 V / 50 Hz total power requirement 4 kW weight of the machine ca. 430 Kg dimensions of the machine ca. 0,8 x 0,7 x 1,3 m • Cold circul... more
3
Compound miter saw for iron: perfect 300 by Berger and SChmidt GmbH Saegeblattdruchmesser: 280mm Bauipwmspe Rpm: 715/1415 1,5-2 KW HP 2-2.7 IP44 Serial number: 92100 more
1
Cartridge stop is 600 mm, machine by a qualified technician clean repaired, tested and is fully functional. Test run is performed. Saw blade diameter: 250 mm Cutting diameter: 70 mm Rectangle: 70 x 45 mm Fkpl9kdpg Color: Green Total power requirements: 230 V Machine weight: 70 kg Dimensions: 550 x 700 x 1650 mm Engine power: kW 0,8 Speed: 45 rpm more
5
Circular cold saw, metal saw, Metallkappsäge saw blade 275 mm Coolant equipment saw blade speed 40/80 U / min-sectional area 90 flat 100 x 50 mm Cutting range 45 flat 65 x 50 mm swivel-clamp pneumatically-stop 3200 mm Dimensions Saw 1200 / 800/H1800 mm Dimensions stop 3200/400/H1000 mm Weight 350 kg C7kyrqz more
6
used, comes from the resolution of a workshop 1 x cutting Hunter VC 260 cold saws fully functional, power - immediately from stock available for casting. Scope of delivery: 1 x born separating Hunter VC 260 cold saws 1 x born saw blade Ø approx. 270 mm -equipped with coolant system and chip tray -Connection cable has been renewed about 3 m long with 16 A CEE plug maximum blade diameter: 275 mm Cutting speed: 16 / 20 / 25 / 32 / 40 / 50 rpm Miter adjustment 45° Vice opening Max... more
4
Pipe saw Fabr. GF Georg Fischer type RA 4 Masch.# 2962 Cutting and chamfering of tubes from steel, VA cast iron, non-ferrous metal and plastic Technical data: Pipe sizes DN 15 - DN 100 1/2 - R4 " min. 16-120 mm maximum wall thickness 7,0 mm infinitely variable speed control 150-270 RPM. Power supply 220 V / 50 Hz Power 1600 W External dimensions approx. 600 x 500 x 1300 mm with -Mounting console used, in good condition 97ql8gn99 more
1
saw blade diameter 400 x 50 mm cutting diameter 130 mm turning speeds 3000 U/min reus variabel einstellbar U/min capacity 90 degrees: round 130 mm capacity 45 degrees: round 115 mm capacity 90 degrees: square 110 x 110 mm capacity 45 degrees: square 100 x 100 mm Wy28othog capacity 90 degrees: flat 250 x 85 mm capacity 45 degrees: flat 160 x 70 mm voltage 400 V / 50 Hz total power requirement 3 kW weight of the machine ca. 380 Kg dimensions of the machine ca. 0,8 x 0,7 x 1,3 m • Cold circular... more
3
By manufacturer Bewo cold saw Type: CPO 250 Saw blade diameter: 250 mm 7tkln0tsd more
2
Saw blade diameter: 260 mm Cutting speed: 16/20/25/32/40/50 m / min Vice opening: 125 mm Machine weight approx. 350 kg M0y9d Space requirement approx. 950 x 950 x 1400 mm more
4
Circular cold saw, metal saw, Metallkappsäge saw blade 275 mm Coolant equipment-burr-free cut through dual-swivel vise Lh9vn more
2
maximum blade diameter 250 mm Cutting range 90 °: Around 80 mm, rectangular flat 95 x 60 mm, square 70 mm 45°: Approximately 70 mm, rectangular 65 x 60 mm, square flat 60 mm Speed 52 RPM maximum blade size 250 x 2.0 x 32 mm 400 V, 1,0 kW Dimensions L x W x H 700 x 400 x 850 mm Weight 73 kg Accessories / special features: • The ideal circular saw for workshop and Assembly to cut VA, brass, steel and aluminium • Miter cuts up to 45 ° left • Spindle Vice with double clamping arm for Ri... more
3
Circular saw with multi-stage manual transmission for a variety of small-format materials. for example: steel up to 50 kg / mm strength, rods, tubes. . Profiles, plates from ferrous and Leitmetallen, laminated paper, plastics and plastic materials of all kinds Dimensions (LxWxH) ca .: 1000 x 800 x 1000 mm Weight approx .: 210 kg Table dimensions: 680 x 500 mm, table moved by handwheel, Travel: 200 mm (cut length) height adjustment Saw blade diameter: 160 to 300 mm, bore 32/40 mm cutting width 1.... more
1
Sägeblatt-Ø 315 mm cutting diameter 100 mm sawblade width 2,5 mm capacity 90 degrees: round 100 mm capacity 90 degrees: flat 130 x 90 mm capacity 45 degrees: round 100 mm capacity 45 degrees: flat 100 x 90 mm turning speeds 18 + 36 U/min voltage 400 V frequency 50 Hz power capacity 0,75 - 1,3 kW weight of the machine ca. 220 Kg range L-W-H 0,7 x 0,6 x 1,3, m • miter possibility of vise and head • automatic protection cover • coolant pump with bin • undervoltage release with under frame • mate... more
4
Saw diameter 100 mm Julima 2-speed Fermentation cut +-45 degrees Length ash along Automatic clamping cylinder (pneumatic) Minimal quantity lubrication 2 saw blades in addition Saw blade diameter 310 mm In the sales order more
4
disk of circular saw-Ø: max. 275 mm cutting area at 90° round: 90 mm cutting area at 90° square: 160 x 65 mm cutting area in mitre at 45° round: 90 mm cutting area in mitre at 45° square: 80 x 80 mm engine: 380 V, 1,2/1,5 kW space needed: 950 x 780 x 1500 mm Ytpinmwcw weight: 300 kg more
3
gebr. Circular saw Make MEP model Falcon 250 mach.-No. .: 155106 / 42F Year 2008 saw blade 250 mm cutting: 70 mm square 60 mm flat 90 x 50 mm cut 45 left: about 65 mm square 55 mm flat 70 x 45 mm blade speed 45 rpm motor 0.5 kW mains voltage 380 V outer dimensions: width 550 mm depth 700 mm height 1650 mm weight about 70 kg Gl7x28m more
1
Circular saw (chop saw) make IPB Pedrazzoli Brown Type Master Specifications: Blade diameter 275 mm miter on turntable 0-45 left 2 blade speeds 55/85 rpm. Driving power 2.5 / 3 kW speed motor 1400/2870 rpm External dimensions W x D x H 1000 x 650 x 1800 mm Weight 200 kg - on stand - quick-action vice - length stop - cooler - saw used in good condition Nfa8xzxxy more
3
Metal cutting circular saws mountain + Schmid simple TL 275 saw blade diameter 275 mm Umin 725 or 1450 400 volt for ALU meessing copper soft materials Copiygp more
1
Sägeblatt-Ø 315 mm cutting diameter 100 mm sawblade width 2,5 mm capacity 90 degrees: round 100 mm capacity 90 degrees: flat 130 x 90 mm capacity 45 degrees: round 100 mm capacity 45 degrees: flat 100 x 90 mm turning speeds 18 + 36 U/min voltage 400 V frequency 50 Hz power capacity 0,75 - 1,3 kW weight of the machine ca. 220 Kg range L-W-H 0,7 x 0,6 x 1,3, m • miter possibility of vise and head • automatic protection cover • coolant pump with bin Ibjtts9 • undervoltage release with under fra... more
Hose saw reel hose cutter Bd9t80ay Width 190 cm Depth 100 cm Height 100 cm -380 V 16 A -120 kg Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone nu... more
3
Saw BERG and SCHMID 8lqc393ck Aluminum saw SIMPLE "/ % more
1
Circular saw Fabr Eisele VMS type II S Specifications: Blade Size 300 mm cutting area 90 flat 160 x 80 mm 45 x 80 mm flat 120 90/45 L-iron 80 x 80 mm 90 U-45 U-16 160/NP iron iron 120 / NP 12 90/45 around 100 mm saw blade 2 speeds 40/80 rpm. Drive power 1,4 / 1,9 kW Dimensions L x W x H 600 x 730 x 1700 mm Weight 390 kg - stationary base - cooling device - measuring gauge 1000 mm - 1 blade used, from an operational resolution, in good condition Hjmwlbx more
1
Circular saw Fabr EISELE VMS type I PV 410 Masch 0005, Year 1980 Technical data: Max blade diameter. 275 mm Cutting range 90 120 x 75 mm capacity 45 80 x 75 mm capacity pipes 90 mm 2 blade speeds 40/80 rpm. Driving power 1.0 / 1.2 kW Dimensions 800 x 600 x 1400 mm Weight 290 kg - stationary base - cooling device - pneumatic blade feed - used pneumatic vise, from an operating resolution, in good condition Cmkbn79c more
2
. Circular saw Fabr BERG & SCHMID Type Compact 250 Fabr 010,612,004, built in 2001 Specifications:. Sectional area of ​​90 80 mm square 70 x 70 mm flat 95 x 60 mm Cutting Capacity at 45 approximately 70 mm square 60 x 60 mm flat 65 x 60 mm Blade size 250 x 2.0 x 32 mm Blade speed 52 rpm. Motor power 1.0 kW 380 V / 50 Hz Weight approx 73 kg External dimensions 700 x 400 x 850 mm - cooler - saw blade used, in good condition Gcvlffv more
1
.. Transportable metal circular saw Fabr Eisele type TKS - G / 225 Masch 2254 Year 1985 Specifications: Blade Size 275 mm Cutting range 90 90 mm 90 square 80 x 60 mm 45 60 mm 45 square 60 x 40 mm Blade speed 58 rpm. Vise swivel 90-45 0.65 kW drive power power supply 220 V / 50 Hz Weight approx 38 kg Outside dimensions approx 640 x 320 x 350 mm used, in good condition Dtdc3yc more
2
Circular saw Fabr EISELE Type VMS II Masch V23183 Year of construction 1969 Technical data:.. Saw blade diameter 275 mm Cutting capacity flat 160 x 80 mm flat 45 120 x 80 mm angle iron 90 and 45 80 x 80 mm U-iron 90 NP 16 U-iron 45 NP 12 pipes 90 + 45 100 mm double-T 90 160 x 74 mm double-T 45 120 x 58 mm full material 100 75 mm f / 2 blade speeds 40/80 rpm. Drive power 1,4 / 1,9 kW Dimensions 700 x 700 x 1600 mm Weight 300 kg - mobile chassis - cooling device - sawblade - vice hand, despite the... more
3
Saw Make EISELE Specifications: Blade diameter 250 mm Cutting range at 90 45 Sägeblattdrm. 275 mm x 120 75 mm 80 x 75 mm L-iron 80 x 80 mm 80 x 75 mm flat bar 120 x 75 mm 80 x 75 mm square steel 75 x 75 mm 75 x 75 mm round steel 90 mm 90 mm solid material about 60 mm saw blade Standard 275 x 2,0 x 40 mm Power 1/1, 2 kW Spindle speed 40/80 rpm. Machine head tilts to each side 45-90-45-30 Dimensions 900 x 800 x 1100 mm Weight 230 kg, used by a permanent resolution is in good condition Nsqkehd9 ... more
1
Metal circular saw Fabr. EISELE VMS type II / 033 Masch.# 31902 built in 1976 Technical data: Saw blade diameter 275 mm Cutting area flat 140 x 70 mm Cutting area in miter 100 x 70 mm Tubes 3 " Withcucg7 Cylindrical in NP 14/NP 10 Solid material 80 / 60 mm 50 x 50 mm square material 2 blade speed 40 / 80 U/min 1.9 kW External dimensions approx. 800 x 700 x 1500 mm Weight 268 kg with -Base -Cooling device used, in good condition more
4
. Metal sawing machine Fabr EISELE Type VMS / 041 Masch S76383 Year 1976 Specifications:. Saw blade diameter up to 275 mm this capacity 90 90 mm flat profile 75 x 120 mm with miter at 45 approximately 90 mm profile 75 x 80 mm 2 blade speeds by two-speed motor 40 / 80 rpm drive motor 380 V, 1.4 / 1.9 kW dimensions 600 x 600 x 1500 mm weight 170 kg - pneum. Vice - mobile chassis - cooling device used, ready for operation Cu9hvkdu more
4
saw blade diameter 275 mm cutting diameter 65,0 mm height of material-table 950 mm cutting speed 46 / 92 m/min dimensions of saw-blade 275 x 2,5 x 32 mm capacity 90 degrees: round 65,0 mm Sgt07ky0l capacity 90 degrees: flat 80 x 55 mm capacity 90 degrees: square 65 x 65 mm capacity 45 degrees: round 60,0 mm capacity 45 degrees: flat 40 x 60 mm capacity 45 degrees: square 40 x 40 mm total power requirement 4,0 kW weight of the machine ca. 197 kg. dimensions of the machine ca. 900 x 790 x 1530 mm... more
3
- Saw blade D 275mm - Movable head 45° right and left - Reduction unit in oil bath - Membrane pump for coolant - Coolant filter - Vice complete with anti-burr device - Bar stop - Service tools V99og - 24 V low voltage installation with hold-to-run head control knob more


Cold circu...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close