Table circular saw

unbekannt Compact 200

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Djdpfjmiik Tox Aarswd Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: excellent (used), Kolbe band saw model K430 s. I have got 5 available. Dwjdpfoy U Ht Hjx Aarod

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° Dedpjhfufgofx Aarswd -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: excellent (used), Planing width 520 mm Min./Max. working height 3 – 240 mm Motor power 5.5 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planing knives 4 pcs Dimensions of thickness table 520 x 850 mm Dwjdpjy Egmuofx Aarsd Feed rate 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 150 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Spiral-toothed steel feed roller Segmented pressure bar 2 steel extraction rollers Table roller Low voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the AM-VO NEW V-belts NEW BALL BEARINGS NEW PLANING KNIVES Dimensions approx. L x W x H = 1120 x 990 x 1000 mm Weight approx. 600 kg Note on used machines: • Subject to errors in technical specifications and prior sale. • Prices quoted are ex-works, pick-up only – free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our location. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address and telephone number!)

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Djdpfxjuzkxxo Aarswd Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire. Dedpfx Aaox A H Rrsrewd

Condition: used, used, good conditionmake Festotype ZA 101machine-No. 2668/SNumber of spindles 3 crosscut sawClamping height 1 x 140 mm 2 x 30 mmCrosscut saw 2,5 HPFence ruler LAS 1750 mm 1000 mm with turret stopWorkpiece clamping pneumaticSpace requirement approx. 1700 mm x 700 mm x 1400 mmPlace of storage 97447 Gerolzhofen, free loaded, unpackedDelivery in as-is condition, as inspectedwithout warranty and guarantee Dwsdpfxsvwffzs Aared

Condition: new, functionality: fully functional, machine/vehicle number: NEW-19, empty load weight: 265 kg, maximum load weight: 1,085 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 255 133 1350 NEW VEHICLE Internal dimensions: 255cm x 133cm Side panel height incl. railing: 43cm Loading area height: 51cm Total weight: 1350Kg Payload: 1085Kg Braked single-axle low-loader Overrun brake and parking brake by AL-KO Dodoghpbvjpfx Aarswd 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust screen-printed plywood side panels Steel railing Rear side panel foldable and removable with tensioning fastener 15mm thick, non-slip and robust screen-printed plywood floor Drawbar wheel 6 lashing eyes with 400Kg tensile force 14" reinforced C tires 2x U-shaped chock M+S tires Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lamps with reversing light and triangular reflector OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Ramps -SARIS aluminum rims -Complete LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Leaf grid in various heights, also closed -Flat cover with or without bow -High cover 150cm or 180cm -Rear supports Further accessories available on request! Plus shipping to Gera and vehicle registration document 150 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: used, Cross-cut saw motor 1.8 kW Milling motor top 1.8 kW Milling motor bottom 1.8 kW Sliding table with Superfix manual clamp Saw blade Dsdpfeq Auzasx Aarjwd 2 slitting discs

Condition: new, Year of construction: 2026, The CORMAK PS12E-1600 panel saw with scoring unit is a solid and precise panel saw designed for working with furniture boards, MDF, HDF, plywood, and other wood-based materials. Thanks to its two-axis cutting system (main blade + scoring blade), the machine guarantees clean cutting edges without tear-out or chipping, which is crucial in the production of furniture and finishing elements. Main Advantages of the Machine Dual cutting system: main blade + scoring blade eliminate the risk of laminate delamination. Stable cast-iron worktable: ensures precision and rigidity even under heavy loads. Large 1600 mm sliding table: designed for cutting large-format components. High-performance 3.8 kW (400 V) motor: enables effortless cutting of even hard materials. Adjustable cutting angle up to 45°: allows angled cuts without compromising accuracy. Precision side fence: equipped with an accurate scale for repetitive cutting. Dust extraction: effectively removes dust and keeps the workstation clean. Complete standard equipment: includes, among other things, a scoring blade, measuring fences, blade guard, and tilt indicator. Construction and Technology The construction of the saw is based on a ground cast-iron worktable and a bearing-mounted sliding table with a support, ensuring stability and full control over the material during cutting. High-quality guides enable smooth movement, while the reinforced body construction eliminates vibrations. The control panel, ergonomically positioned at the front of the machine, provides convenient adjustment of the cutting height and cutting angle. The blades are driven by a 3.8 kW motor, which provides a substantial power reserve when processing difficult materials. Precision and Work Efficiency The CORMAK PS12E-1600 table saw with scoring unit has been designed with high repeatability and accuracy in mind. The cutting depth and angle are adjusted using lockable adjustment knobs, which increases safety and operating comfort. The high rotational speed of the saw blades (up to 5800 rpm for the scoring blade) enables fast and clean cuts without causing a burning effect on the material. Standard Equipment Saw blade Scoring blade Crosscut fence Rip fence Blade guard Table extension Mitre fence Blade tilt indicator Eccentric clamp Polish-language manual EC Declaration of Conformity Optional Equipment Saw blades with different diameters and tooth configurations Trolleys for large-format materials Dust extraction systems Side and rear table extensions Technical Data: Sliding table length [mm] 1600 Cutting width on the right-hand side [mm] 1260 Saw blade tilt [°] Dedpfx Ajvuf Uqoarowd 45 Cutting height at 45° [mm] 80 Cutting height with 315 mm circular saw blade installed at 90° [mm] 100 Cutting height with 300 mm circular saw blade installed at 90° [mm] 95 Maximum saw blade dimensions [mm] 315 x 30 Maximum scoring blade dimensions [mm] 100 x 20 Main saw blade speed [U/min] 4500 Scoring blade speed [U/min] 5800 Motor power [S1/S6] 3.8 kW / 6.1 HP Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12 Manual (DTR) YES CE Declaration YES