Cold circular saw / KASTO-Radial M4

KASTO KASTOradial M4

Year of construction: 2024, condition: new, The robust manual length stop MD 100 m enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length is measured using an easy-to-read tape measure with mm graduation. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power • raise and lower manual arm • Measuring rail with measuring tape and reading beacon (resolution 0.10 mm) • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever Itodpfx Ajidlpiegzjr -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors

Condition: excellent (used), Year of construction: 2006, CNC cycle lathe WEILER E 50, year 2006 WEILER cycle control D3 Chuck 250 mm SCHUNK ROTA-S 250-62 Parat tool holder size 3 with 4 tool pockets Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Spindle bore: 83 mm Itodpfxexd Diuj Agzjr Centre distance: 1000 mm Turning length: 1100 mm Spindle speeds: 1-2500 rpm / Motor: 20 kW For all further details, refer to the data sheets. Machine documentation and data backups available, machine under power and ready for demonstration.

Condition: like new (used), Year of construction: 2014, operating hours: 15,000 h, Atlas Copco compressor stage after refurbishment. Itjdpsmzbdwjfx Agzer

Condition: new, saw blade diameter 315/350 mm capacity 90 degrees: round 125 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 160x90 mm capacity 45 degrees: round 105 mm capacity 45 degrees: square 90 mm capacity 60 degrees: flat 80x100 mm total power requirement 1,8/2,5 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,6 x 1,22 x 1,06 m The large workshop saw with sophisticated technology. (20070) • For miter cuts right and left up to 45°, end stop at 90° and at 45° left • For sawing steel, stainless steel, and, to a limited extent, aluminum profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Conical safety clutch made of hardened steel to protect the saw blades. • Large base plate made of solid cast iron for maximum stability and low-vibration sawing • 2 speeds: 30 + 60 rpm Itsdpfx Ajd Iin Tsgzsr • Powerful special gear with elastic clutch for heavy-duty use • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in the handle with restart lock • Length stop, assembly tool ATTENTION: Price does not include saw blade!!!

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg Itsdsz N Amjpfx Agzor

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet Itjdpfsvambcjx Agzsr To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: used, Year of construction: 1996, cutting diameter 260 mm saw band length 2910 mm cutting width 0,9 mm capacity 45 degrees: round 200 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 300 x 260 mm capacity 60 degrees: round 165 mm capacity 60 degrees: square 150 x 150 mm capacity 60 degrees: flat 160 x 120 mm cutting speed 35 / 70 m/min dimensions of saw-band 2910 x 27 x 0,9 mm height of material-table 950 mm total power requirement 2,0 kW weight of the machine ca. 400 kg dimensions of machine L x W x H 1,70 x 0,90 x 1,67 Itodpfotqql Tjx Agzjr Accessories: coolant

Year of construction: 2025, condition: new, The manual length stop with hand wheel and electronic dimension display MD 50 h is ideal for frequently changing section lengths and for stopping long materials. A hand crank enables the carriage to be moved quickly and precisely. Itedpfx Ageidln Tezer

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Iodpfowuddvjx Agzetr Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg Isdpfxjf Dwa Us Agzotr +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++