Used Punching Machine With Belt System for sale (85,230)

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: Nodpfxev T Anlo Akcola • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: ready for operation (used), * Brand: FINLAY * Model: mobile belt conveyor with screening machine * A-A length: 11.500 mm, * Beltwidth: 650 mm * Dim. Screen: 2000 x 900 mm, 1 deck. * Screen opening: 10 mm. * Power: 11 kW E-motor. Njdeywmfnopfx Akcela

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies. Nodpfx Aoulc Sqskcola

Condition: used, Year of construction: 2006, BUSKRO BK700 printer. System on MikroJet HVT305 vacum transport table and MikroJet MJ360 receiving table (no photo). Equipped with two print heads and MikroJet Type 6521 UV fusing system. Nedpfsq T N T Tox Akcjla Compose IQ software. Machine in working order in continuous operation. Inspection and testing possible. In addition, I attach for replacement: 2x set of conveyor belts and 3x UV lamps.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm Nedpfsxdmgvsx Akcela CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), functionality: fully functional, outer diameter: 3,500 mm, usable tank capacity: 50,000 l, TECHNICAL DETAILS Number of silos: 2 Gross volume: 50 m³ Cylinder diameter: 3,500 mm Cylinder height: 5,000 mm Discharge diameter: 200 mm Roof shape: Conical 15° Cone-shaped floor, apex angle: 60° EQUIPMENT Nlsdsy Hiuwepfx Akcea Lifting lugs Hinged manhole, 600 mm diameter with safety grid Mount for pressure/vacuum relief DN80 PN10 nozzle for filling line Nozzle with blind flange Nozzle for overflow Nozzle for level switch

Condition: excellent (used), Year of construction: 2017, overall weight: 315 kg, total length: 1,840 mm, total width: 1,180 mm, total height: 1,000 mm, VRF SYSTEM PANASONIC U14ME2E8 40 KW Cooling capacity: 40 kW (27/19°C - 35°C) Heating capacity: 45 kW (7/6°C - 20°C) Year of manufacture: 2017 Type of refrigerant: R410a Number of fans: 1 pcs. Compressors: 2 pcs. Copeland (scroll) Dimensions: 1.84 x 1.18 x 1.00 m Weight: 315 kg Condition: Excellent CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Nedpfxeqz Ucij Akcjla By purchasing a chiller / kaltwassersatz / from us, you also receive: - refrigerant charging; - replacement of oil and the refrigerant filter (for used chillers); - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Nsdpswz Ukyjfx Akcsla Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. Nsdpfx Akjuzv Tzecela As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), APPLICATION BELT with VIBRATING feeder Used machine A pneumatic slide valve from the vibro-feeding roller controls the dosing onto the application belt Nodpjtp Hd Uefx Akcola Overall dimensions: 2700 x 1300 x 2800 mm Strap size 2400 x 140 mm Throat size: 1000 x 1300 mm Transport speed: 15 m/min

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Njdpfx Akoyzxa Eocela Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, pressing force: 32 t, working height: 200 mm, controller model: Siemens 840D, working length: 2,150 mm, TECHNICAL DETAILS Bending length: 2,150 mm Maximum bending height: 200 mm Minimum length/width between bends: 160–350 mm Pressing force: 32 t MACHINE DETAILS Control: Siemens 840D Dimensions & Weight Dimensions (L x W x H): 8,500 x 7,000 x 2,850 mm Weight: 30,000 kg EQUIPMENT Automatic tool changer Manipulator Reverse bending cycle Nlsdpfx Aksy D Ihwscja Sheet centering system Additional top tools Loading and unloading system

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running Nlsdpfxey Erxvo Akcsa - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: new, width of the strips 100 mm band length 920 mm Nlsdexaatuopfx Akcea band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 220 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Nljdpfx Akoxaapvocja Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 100 mm band length 920 mm band speed 7.0 m/sec loading area 300 x 150 mm motor 0.44 KW motor 400 Volt range L-W-H 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley Nljdpfexaappjx Akcja - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 45.0 mm band length 850 mm band speed 8.0 m/sek. voltage 230 V total power requirement 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor Nodsxaanrspfx Akcjla - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 300 mm band length 2070 mm band speed 7.0 m/sec surface of working table 750 x 380 mm diameter 87.7 Führungsrollen mm engine output 1.5 kW total power requirement 400 Volt weight of the machine ca. 88.0 kg. range L-W-H 1050 x 600 x 400 mm Nljdpfjxaapiox Akcea MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 Nljdpfx Akjy Ehiwjcja 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 100377, table length: 860 mm, table width: 600 mm, overall weight: 5,000 kg, stroke rate (max.): 300 1/min, No minimum price – guaranteed sale to the highest bidder! Nlsdpfxoy D R Rzo Akcea Placing a bid obligates prompt collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Strokes: 60 – 300/min Table dimensions: 830 mm x 600 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1,500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,500 x 2,400 mm Machine weight: 5,000 kg EQUIPMENT Press force measuring device (Model: GERLACH PKV 100) External reference: 66

Condition: ready for operation (used), functionality: fully functional, pressing force: 63 t, stroke length: 80 mm, table length: 700 mm, table width: 640 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to collect the item within the timeframe of 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Nlsdpfx Aey D Nvpokcoa Stroke: 8 - 80 mm Flywheel diameter: 830 mm Pressure: 63 t Speed: 60 - 300 rpm Table dimensions: 700 x 640 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1,200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 2,700 mm Machine weight: 7,000 kg External Reference: 52

Condition: used, Year of construction: 1994, Max. pass-through height: 160 mm Abrasive belt length 1st unit: 1900 mm Max. working width: 1350 mm Number of belts: 2 1st unit: - Calibration roller, steel design - Steel, grooved Abrasive belt width 1st unit: 1350 mm 2nd unit: Combined sanding unit Design of 2nd unit: Roller/shoe Control: Manual control panel Elec./pneu. belt oscillation: pneumatic Nedjy Exx Nspfx Akcjla Infeed height: fixed (upper part moves) Table lift: electro-motorized Table display: mechanical numeric display Working or infeed table height: 900 mm Location: Nattheim

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15 + 30 m/sel tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad Dust suction hood 2 x 75.0 mm motor speeds: 1420 / 2660 Upm. face grinding attachment 400 x 100 mm total power requirement 2.5 / 3.3 kW weight of the machine ca. 148 kg. range L-W-H 750 x 1400 x 1200 mm Furnishing : - Constant belt tension through spring-loaded tensioning device - Standard with cylindrical grinding device - for grinding diameters of diam. 20-76 mm - Quick and easy setting of the desired grinding angle - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt - Large plan grinding surface with protective cover - Slow belt speed (15 m / sec.) - ideal for grinding stainless steel and aluminum - User-friendly tape change, quick and uncomplicated - Quick and easy changing of the grinding rollers without tools - Various grinding angles from 30 ° to 90 ° are possible without any problems - Shorter processing times compared to milling scope of delivery - Sanding belt K 36 - Rubberized sanding roller Nodpfxexab Dzo Akcsla - 1 piece sanding roller for 1 1/4 "pipe (42/44 mm pipe) - 2 pcs. Hinged protective panels - Sanding and support table - 2 x dust extraction nozzle diam. 75 mm - 2 pieces of chip collector - graphite coating - Motor protection switch

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € Nljdpfxowirkge Akcsa 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: new, functionality: fully functional, With this offer, you are purchasing a used accessory option ‘SDD Belt Stacker BST6800&BST6900’. Nsdpsytcpysfx Akcjla Item for sale: 1 x SDD Belt Stacker BST6800&BST6900: Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.