Belt Grinding Machine

FALKEN // CRL Mod. ACO-45

Condition: excellent (used), Year of construction: 2017, Brandt KDF 1440 Edition Only 1700 operating hours – in very good condition – can also be supplied with a preheating station. XES 200 autonomous unit (+ €4500) available. SUMMARY OF MACHINE EQUIPMENT: JOINTER HEAD 2 X 2.2 KW 200 HZ GLUING UNIT QA 65 N SAWING UNIT BEVEL/STRAIGHT 2 X 0.18 KW PNEUMATIC ADJUSTMENT FOR SAWING BEVEL/STRAIGHT MULTI-STAGE MILLING HEAD MS 40 COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT SHAPED MILLING HEAD 1 X 0.35 KW WD 60; also for structural flooring PNEUMATIC 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER HEAD MZ 40 GLUE JOINT SCRAPER EDGE TRIMMING UNIT Overpressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spray unit for workpiece Automatic edge infeed Multi-roller scanning for multi-stage milling head MS 40 + multi-stage scraper MZ 40 Cleaning agent spray unit WORKPIECE AND EDGE PARAMETERS: – Workpiece width min: – For workpiece thickness 8-22 mm ¦ 70 mm* – For workpiece thickness 23-40 mm ¦ 120 mm* – For workpiece thickness 41-60 mm ¦ 150 mm* *Depending on workpiece length – Workpiece overhang ¦ 38 mm – Workpiece thickness ¦ 8 – 60 mm – Edge height max. = workpiece height ¦ + 6 mm – Edge material, roll ¦ 0.4 – 3 mm – Edge cross-section max. Ibedpfx Ajzb Iggjkxoa – For PVC ¦ 135 mm² – For veneer ¦ 100 mm² – Roller diameter max. ¦ 830 mm – Edge material, strip ¦ 0.4 – 8 mm – Edge cross-section max. – For strips ¦ 360 mm² – Feed rate ¦ 8 – 14 m/min – Max. feed rate with shaped milling head ¦ 11 m/min – Working height ¦ 950 mm – Pneumatic connection ¦ min. 6 bar – Overall length ¦ 5,573 mm Complete description: see PDF

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm Ibodswtctmspfx Akxsa *

Condition: good (used), functionality: fully functional, Brother S-7300A-403P Full Sewing machine station. Single Needle Direct Drive Lock Stitcher with Electronic Feeding System and Thread Trimmer. With Work Table and Spindles. World’s first Electronic Feed Control DigiFlex Feed digitalizes the feeding system and resolves various sewing troubles without adjustment work. Improvement in the reduction of needle breakage and productivity. Simple select and smooth sewing without material slippage. Excellent sewing quality that's easy to get proper thread tension in accordance with several materials. The Electronic Feed Control is directly connected to the stepping motor The horizontal feeding system is one of the first systems computerized for a single lock stitch sewing machine. The feed motion can be changed with one touch of a button to provide the best sewing quality for various materials. The sewing stitch length can also be digitalized, stabling the stitches. Compared to conventional mechanical control, the stepping motor control makes the response of reverse sewing quicker and reduces needle breakage. LED Light Equipped as Standard Both sides of the LED handy light are equipped for better operation, preventing shadows on the garment. The brightness can be adjusted on the panel. Good working condition. Please check out our other listings as well. Ibodpfxov U Ehqs Akxja

Condition: used, machine/vehicle number: 007135, Max. panel width: 800 mm Max. panel length: 2500 mm Ibjdpfot Hmppjx Akxoa Panel return for edgebander: Left

Condition: excellent (used), Year of construction: 2021, Used HOMAG Drillteq V-200 - Year of manufacture: 2021 - Immediately available - Excellent condition Ibjdpfx Aezdvuvskxsa - Tools can be included for an additional charge. Please feel free to contact us if you have any questions.

Condition: refurbished (used), Year of construction: 2023, operating hours: 813 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 200 l, battery voltage: 36 V, The Kärcher B200R D90 Dose is a 2023 model and has only 813 operating hours. We have completely overhauled the machine, with every component cleaned and functionally tested. The squeegee, base plate, and collision protection have been sandblasted and newly powder-coated in-house. New rubber lips on the squeegee ensure optimal suction results. Ibedpfjxx Ta Eox Akxoa The machine is sold with brand-new, maintenance-free gel batteries. Additionally, the Kärcher B200 R is equipped with a detergent dosing system, which precisely meters the cleaning agent into the cleaning process. For improved illumination of the working path, the machine also features an auxiliary work light that can be switched on as needed. The Kärcher B200 R is ideally suited for medium to large areas such as logistics warehouses, workshops, or underground car parks. Technical specifications: Working width: 90 cm Fresh water tank: 200 liters Suction width: 118 cm Weight: 957 kg

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 238828, Available: Immediately Ibodpspr Uvrefx Akxoa

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Bed width: 255 mm Spindle mount: DIN 55027 size 5 Ibedpfx Asxz Rfkokxsa Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 5,000 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,550 mm, motor manufacturer: Yunnei EUR5 2,7L, fork length: 2,000 mm, overall weight: 4,400 kg, empty load weight: 4,400 kg, total height: 2,550 mm, total width: 1,800 mm, color: blue, Equipment: CE marking, air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, trailer coupling, I have a 3.5T rough terrain forklift for sale with a permanent 4x4 drive. EUR5 Yunnei DEF20CAF4 Dieselmotor 55kW 75KM Air-conditioned cab The truck is equipped with: - Triplex mast, 5m lift height - Fork side shift - Fork positioner - Carriage width: 1500mm - 1220mm long forks - Additional 2000mm long forks included - Pneumatic tires, size: 20.5/70/16 Truck dimensions: 370cm long, 180cm wide, 255cm high Isdpfx Aexa Anhskxeba Truck weight: 4400kg option to purchase a 1800mm wide hydraulic bucket as a direct importer, we provide access to spare parts !!! Forklift price: 19800 EUR EXW PayPal payment available

Year of construction: 2023, condition: new, We sell a new double belt grinder. The contact wheels can be purchased in different dimensions. Technical data: Weight: approx. 350 kg Electrical connection: see type plate of the respective drive motor Compressed air connection: 3 - 8 bar Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm grinding belts: max. 120 mm x 3500 mm length Suction connection: Ø 160 mm Isdpok D Ex Tjfx Akxsba If you have any further questions, please do not hesitate to contact us!