Used Sander Ozon Generator Sander for sale (10,573)

Condition: used,

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Ljdpoyvzznsfx Akqerk Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Installed power: 4 kW Maximum peak current: 7 A Maximum operating current: 3 A Power cable cross section: 4 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM and CAT GAS generator set, CHP as option, Generator 10500V/50Hz. Lredpfx Aev Uag Iekqok

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Lrjdpfeyl Nntex Akqsk

Condition: ready for operation (used), Year of construction: 2003, Belt width: 10/12mm, belt material: PP (polypropylene), connected load: 1kW, length: 1420mm, width: 615mm, height: 1550mm. The machine has already been dismantled, an on-site inspection is possible. Lodpfeuyk N Usx Akqerk

Condition: reconditioned (used), functionality: fully functional, Manufacturer: Sander Type: Vario Master Model: 9480 Passage height of the pallet: approx. 2200 mm Pallet passage width: max. 1300 mm Bayonet position from the floor: 500 mm Year of manufacture: 1999 Type: Vertical strapping machine Lrjdjttwpbopfx Akqsk Operating voltage: 400 V Power: 2 kW Control voltage: 24 V The machine is installed in our workshop and technically overhauled. We are selling a fully functional machine.

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Year of manufacture: 2023 Lredpfx Akox U Tgmeqjk The unit looks as good as new. The system was only in operation for a short period.

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) Ledpfexfrv Esx Akqjrk 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Lsdpow U N Dajfx Akqjrk

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4806170, grinding width: 1,350 mm, grinding belt length: 2,260 mm, workpiece height (max.): 160 mm, grinding belt width: 1,380 mm, TECHNICAL DETAILS Lsdpfx Aeyzm Siskqjrk Working width: 1,350 mm Abrasive belt width: 1,380 mm Abrasive belt length: 2,260 mm Working height range: 3 - 160 mm EQUIPMENT Color display control system IPC Program positions can be stored in the terminal Automatic real-time adjustment of all necessary processing parameters Perforated rubber conveyor belt for extraction External reference: MNA001

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 5211291, feed rate X-axis: 16 m/min, grinding width: 1,350 mm, power: 15 kW (20.39 HP), grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Abrasive belt length: 2,620 mm Workpiece thickness: 3 to 160 mm Feed speed range: 3 – 16 m/min (infinitely variable) Lsdoyx Et Tepfx Akqork MACHINE DETAILS Motor power: approx. 15 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,500 x 2,500 mm Machine weight: approx. 4,300 kg EQUIPMENT Cross unit for intermediate lacquer sanding Combination unit (roller + sanding pad) Electronic segmented sanding pad for precise surface finishing Finishing brush for perfect end results Ionization device for dust neutralization Dust extraction with propeller fan for a clean working environment Touchscreen control for user-friendly operation Calibrating and fine sanding in a single pass High flexibility due to multiple units Robust construction for industrial use Ideal for processing lacquered, veneered, and solid wood panels Note: The above data is taken from the manufacturer’s brochure or documentation and may differ from actual values.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DK32037U640362L, overall weight: 975 kg, fuel type: diesel, tank capacity: 120 l, rotational speed (max.): 1,500 rpm, New ETT-50P generator from year 2026! TECHNICAL DETAILS Speed (max.): 1,500 rpm Power factor: 0.8 MACHINE DETAILS Output current: 72 A Output voltage: 400 V Output frequency: 50 Hz Type of output current: three-phase Continuous power (apparent): 50 kVA Emergency current: 72 A Lrsdey Emwyjpfx Akqek Voltage: 400/230 V Phases: 3 Fuel type: Diesel Tank capacity: 120 l Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,060 x 1,373 mm Total weight: 975 kg EQUIPMENT CE marking Suitable with ATS switching system for mains takeover

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Lodperuakgefx Akqork Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, machine/vehicle number: 008192, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr sectioned swab: yes Lrjdex A E Szepfx Akqok

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Min. machining thickness: 100 mm Working Table: adjustable Ledpfxox A Tfio Akqsrk Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Lrsdjxaqa Sspfx Akqok Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, Year of construction: 1977, machine/vehicle number: 19909, Equipped with: Index Plate Geneva Cam Cutter Body Hydraulic Work Clamping Coolant Pump & Tank Chip Conveyor Additional Cutter Bodies, Index Plates & Geneva Cams Available Specifications: Minimum Outside Cone Distance: 2.75" Maximum Cone Distance: 10" Maximum Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 Deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 15.6 to 87.7 RPM Feeds (seconds/tooth): 5 to 34.3 Main Motor: 10hp, 1800 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approximate Floor Space: 118" x 86.5" Needed Overall Height: 70" Lrodsxdfazepfx Akqok Approximate Net Weight: 18,820 lbs Shipping Weight Boxed for Export: 20,500 lbs

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Lsdpfx Ajxdfa Uekqerk Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Lrsdpsrtrykjfx Akqek Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: used, Used Oxymat O500 PSA industrial oxygen generator made in 2012 and with capacity 40.6 m3/hour. Containerised system that includes the following equipment: - Almig 45 belt air compressor, cyclone separators, air receiver, Donaldson DCO 360 AB dryer, Donaldson ultrafilter, Oxymat 2-column O500 system, oxygen receiver, Oxymat control panel, Rix compressor, low oxygen gas detection system. - Not suitable for medical oxygen. Lrsdpfxoyt Rc Ie Akqek

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 4 Nr Lsdpfxoy Edqws Akqerk

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells Lsdpfx Akjy E Iycsqork - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: used, Year of construction: 2000, total width: 2,200 mm, total height: 2,200 mm, total length: 3,000 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 3,500 kg, grinding height: 170 mm, power: 46 kW (62.54 HP), No. 3271 Wide belt sander HEESEMANN MFA 6 Lrjdpfx Akey Eq R Rsqok Used, year of construction 2000 Multi-purpose surface sander / 2-belt cross-belt sander Sanding width 1350 mm Maximum sanding height 170 mm 1 cross belt with electronic pressure shoe 1 longitudinal belt with electronic pressure shoe and roller 1 brushing unit Total electrical power 46 kW For sanding veneer, lacquer, and film, and for calibrating and fine-sanding solid wood Processing of longitudinally and cross-veneered parts possible Sanding of warped and differently laminated parts possible A wide variety of workpiece shapes possible (e.g., round, oval, rectangular, asymmetrical) CSD pressure bar system 32 mm fine scanning Tolerance of 2 mm Cross-grinding method Constant working height of the transport table Vacuum table Installation dimensions approx. 3000 x 2200 x 2200 mm LWH Weight approx. 3500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: good (used), Year of construction: 2014, operating hours: 246 h, functionality: limited functionality, overall weight: 3,000 kg, fuel type: diesel, color: green, power: 176 kW (239.29 HP), output current: 318 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 176 kW (239.29 HP), nominal power (apparent): 220 kVA, continuous power: 163 kW (221.62 HP), continuous power (apparent): 203 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Volvo mPenta, type of cooling: water, Brand: Pramac Model: GSW220V Year of manufacture: 2014 Serial number: PEE2563417 Operating hours (read): 246 Capacity (kVA): 220 - 202.8 Capacity (kW): 176 - 162.2 Engine brand: Volvo Penta Engine model: TAD733GE Fuel: Diesel Alternator brand: Mecc Alte Alternator model: Eco38 2S Voltage: 400 Lrjdpfxsy A Iuuo Akqek Frequency (Hz): 50 RPM: 1500 Amperes (A): 317.6 Dimensions LxWxH (mm): 2650 x 1180 x 2450 Weight (kg) approx.: 3000 Units in stock: 1 Made in: Spain Comments: Ex-emergency set in good condition

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Lrodpfoy Dhudjx Akqok