Used Screen Laser Diodes for sale (6,127)

Year of construction: 2026, condition: new, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >380 mA U1150073-10 Refurbished Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, (new diode inside, used housing) Kledpfeb Uptcjx Abgjr U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, CTP ᐳ2013 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new

Condition: used, Year of construction: 1988, functionality: unexamined, Complete screen printing engraving equipment: Laser Engraver Make: Stork Klsdoy D Tgxepfx Abgor Type: Laser Engraver STK 2000 Year of Construction: 1988 Completely overhauled in 2006, used for only a few years, then preserved and stored for future use Screen diameter: 64 cm Length: 310 cm Lacquer Coater Make: Stork Type: RSE 3100 / Q4B1/2000 With end ring gluing unit Make: Stork Type: SCR-85 Includes 2 screen drying units and screen washing Professionally marked and dismantled, must be moved immediately

Year of construction: 2026, condition: new, original Screen laser diodes 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM (64 channel) new & second-hand Kledpfx Absdmdvvogjr All offers subject to prior sale

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon Controller LPC03. Laserline diode laser The diode laser 'LDM 500-60 ' has a wavelength of of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 wavelength of 935 nanometers +-10% Laser power: 550 W Mains voltage 100-264V +- 10% Max.power input 1,7 kw Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 has the power of a complete PC in a very small space. Instead of a hard disk a removable flash disk was installed. Due to the omission of the hard disk and the extremely low heat development, the LPC03 is therefore ideally suited for tasks in the field of for tasks in the field of measurement and control in industrial environments. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measurement and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: exchangeable flash disk Connectors: USB front; Ethernet,RS232, VGA, keypad, mouse,USB rear. Ksdpfx Abjdux Duogolr Housing: 212mm X 80mm X 250mm ( height X width X depth ) Protection class:Front: IP40 Environment: 15°C - 40°C Ty

Condition: good (used), Year of construction: 2013, 4 piece diode laser system, Limo Diocut 1300 - second-hand - : Price per piece ex location: 1.950.-€ (net)! Manufacturer: LIMO (Lissotschenko Mikrooptik) Type: Diocut 1300 Year of manufacture: 2013 Ksdpfxoumi Ste Abgjlr 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Condition: good, Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 74 h, laser power: 3,300 W, laser wavelength: 1,030 nm, power: 12 kW (16.32 HP), input voltage: 400 V, type of input current: three-phase, total length: 770 mm, total width: 1,400 mm, total height: 1,770 mm, Laser unit with low working hours. It was as a backup unit. Klodpfx Abotwb Tfjgjr

Condition: used, Year of construction: 2017, ABB robot cell with Clean Laser Manufacturer: ABB / Clean Laser Type: IRB4600 Year of manufacture: 2017 Kedpfx Aowrcn Ujbgslr System consists of: ABB robot IRB4600 Control cabinet Handheld control device Laser cleaning unit Clean Laser type intelliScan30 Extraction system TEKA 16426ä

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 1,500 W, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Laser Cutting Machine with 1500 W Fiber Laser "Ecoline" Our goal is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed library of cutting parameters is included, along with first-class service. Please also take note of our attractive leasing and hire-purchase options. The most cost-effective entry into laser cutting technology - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Requires only approx. 3.0 x 3.0 meters installation space - Top quality; book your viewing appointment now! Cutting capacities: - Steel sheet up to 15 mm - Stainless steel up to 6 mm - Aluminum sheet up to 5 mm - Travel range approx. 1300 x 1300 mm - Table size approx. 1300 x 2500 mm (suitable for a full mid-format sheet) - Machine control in German - Manual front door - Comprehensive collision protection features - Large front window for monitoring the cutting process - Automatic, programmable 2-gas switching (compressed air/nitrogen, oxygen) - Extensive cutting parameter files - Includes nesting module - CypCut1000 cutting software - Raytools 240 cutting head - Very user-friendly operation - High-performance laser chiller Sales are exclusively to commercial customers. Delivery/Consultation/Sales only in Germany, Austria, and Switzerland. Machine dimensions approx.: Width: 3.2 m Height: 2.3 m Length: 3.3 m Total weight: approx. 2800 kg Need a different laser power, table shape, or table size? No problem. I am happy to provide a custom quote. Not sure which laser power is right for your application? Kjdpfxsitu Sro Abgslr Of course, I can carry out cutting tests tailored to your requirements. Many options are available—from 0.5 kW up to 20 kW laser power.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, warranty duration: 12 months, laser wavelength: 1,070 nm, Equipment: cabin, Laser engraving machine with 30 watt laser power - Demonstration unit (approx. 100 hours) - Viewing is worthwhile - Includes Windows PC 64bit (with monitor/keyboard/mouse) - Fully installed and calibrated - Engraving software in German - Very easy to operate - Switch on and start immediately - 30 watt fiber laser source for high-contrast and fast markings with extremely high resolution (see images) - Wobble function, e.g. for cleaning metal components - Deep engraving up to 3mm possible - For engraving a wide range of metals (stainless steel, brass, aluminum, etc.) and many plastics - Heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 390 x 270 x 350 mm (L x W x H) - Clamping surface with threaded holes in a 50 mm grid - LED workspace lighting - 50 mm pipe connection for fume extraction - Engraving area up to 170 x 170 mm - Motorized focus adjustment - Foot switch included for starting the engraving process Please also check our attractive leasing and hire purchase offers. Sale exclusively to commercial customers. Delivery / consulting / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 450 mm Kljdpfx Aod Ha I Sebgsr Height: 800 mm Depth: 750 mm Weight: approx. 80 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, laser power: 150 W, input voltage: 230 V, type of cooling: water, warranty duration: 12 months, shaft length: 10,700 mm, Equipment: CE marking, cabin, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser cutting machine from our showroom with 150-watt laser power Delivery time: immediately available ----- Switch on and start working ----- ----- Machine with only approx. 10 operating hours ----- ----- Year of manufacture: 2025 ----- ----- Professional-grade machine ----- - incl. Windows 11 PC system / monitor / keyboard / mouse - Pre-installed cutting and engraving software in German - Fully integrated and ready for immediate use - Capable of extremely fine engraving as well as precise cutting of thick wood or acrylic (PMMA) - Machine was only used for demonstration purposes - Highly versatile cutting system - Cuts wood up to 20 mm thick - Cuts acrylic and various other plastics - Cuts fabrics, nonwoven materials, etc. - Cuts rubber sheets - Engravings on wood, concrete, stone, many plastics - Production of stamps - Heavy-duty industrial quality - Travel range: 1300 x 900 mm - Drives with hybrid servos - Linear guides on all axes - reci laser tube with 150 watts peak output - incl. honeycomb worktable (removable / extendable) - incl. knife blade table (removable / extendable) - Sheets up to approx. 20 mm thick can be fed through the machine - Continuous processing possible - incl. generously dimensioned laser chiller - incl. high-capacity extraction system - Very easy to operate - Machine control in German - Machine controller in German with large color display Kjdpfxefkgq As Abgjlr - Highly reliable data transfer via USB and network cable - No hassle with occupational safety authorities - All spare and wear parts are in stock Please also see our attractive leasing/financing offers. Sale exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 200 cm Height: 125 cm Depth: 150 cm Shipping weight: approx. 600 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 2,800 kg, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Laser Cutting Machine with 3kW Fiber Laser Our goal is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair facilities. A carefully optimized cutting parameter library is included, along with first-class service. The most cost-effective entry into laser cutting technology - Specially designed for steel and stainless steel processing Ex-demonstration machine with very few operating hours - High-quality MaxPhotonics laser source - Extremely energy-efficient cutting system - Only approx. 3.0 x 3.0 meter footprint - Top quality – schedule your viewing now! Cutting capacity: - Steel sheets up to 22mm - Stainless steel sheets up to 12mm - Travel range approx. 1300 x 1300mm - Working table size: approx. 1300 x 2500mm (Accommodates a full mid-format sheet inside the machine) - Machine control in German language - Automatic front door (secured with light barrier) - Extensive collision protection systems - Large front window for monitoring the cutting process - Programmable proportional valve for oxygen - Including cutting parameter file - Including nesting module - Very easy to operate - Powerful laser chiller - Including comprehensive spare parts package Sale is exclusively to commercial customers. Delivery / Consultation / Sale only within Germany, Austria, and Switzerland Ksdpjy A Tu Tjfx Abgelr Machine dimensions approx.: Width: 3.2 m Height: 2.3 m Length: 3.3 m Total weight: approx. 3,000 kg Leasing or hire purchase available through our financing partner Need a different laser power, table form, or table size? No problem. I will gladly prepare a suitable offer. Unsure what laser power fits your application? Of course, I will conduct cutting trials tailored to your requirements. A wide range is possible – from 0.5 kW up to 20 kW laser power.

Year of construction: 2026, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Kedpfov Sybysx Abgslr With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: new, functionality: fully functional, TECHNICAL SPECIFICATIONS Model-S1530 Working area: 3.060*1.530 mm Laser power: 3 kW OR 6 kW Strokes on axele X/Y/Z: 1.500 / 3.000 / 100 mm Motors power on axes X/Y/Z: 0.85kW / 1.3 kW(x 2 dual motors) / 0.4 kW Maximum loading table: 800 kgs Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.02 mm Ksdpfx Abexfrgkjgjlr Maximum speed: 80 m/min Maximum acceleration: 0.8G Exhaust system: Included (with 1,5 kW fan) Machine size (L*W*H): 4.950*2.280*2.130 mm Total weight: 4.550 kgs

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Delivery time: approx. 6-8 weeks Our commitment is to provide highly precise, long-term stable, yet cost-effective laser machines. Our machines are ideal for workshops and repair businesses. A perfectly developed cutting parameters library is included in the delivery, as well as first-class service. Kjdpfxoxw T Nko Abgslr Please also consider our attractive leasing/loan purchase offers. - Machine without automatic shuttle table! Loading takes place on the long side of the machine - Very space-saving - Extremely energy-efficient cutting system - Requires only approx. 4 x 4.5 meters of floor space - 6kW laser source from MaxPhotonics (G5/German configuration) - Laser generator with wall-plug efficiency exceeding 30% - Suitable for aluminum - Top quality – book your inspection now! Cutting capacity: - Steel sheet up to 30 mm (maximum) - Stainless steel sheet up to 15 mm (maximum) - Aluminum sheet up to 12 mm (maximum) - Brass sheet up to 8 mm (maximum) - Travel range: 1500 x 3000 mm (for large format) - Machine control system in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser safety windows for process observation - Comprehensive cutting parameter library - Incl. nesting module - Very easy to operate - Powerful laser chiller - Machine control system in German - German service and spare parts supply - Powerful laser chiller - Exhaust filter system optionally available (5.5kW with frequency converter for pleasantly quiet operation) Leasing or hire purchase possible through our financing partner. Sale only to commercial customers. Delivery / consulting / sales only within Germany, Austria, and Switzerland. Machine dimensions approx.: Length: 4.0 m Height: 2.3 m Width: 4.5 m Total weight: approx. 4500 kg Need different laser power, table design, or table size? No problem. I would be happy to make you a suitable offer. For example, 2kW machine from 29,990 euro Not sure which laser power suits your application? Of course, I can perform cutting trials according to your requirements. Much is possible here.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) Klsdpfjyxccrex Abger - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g Kedpfod Ecncex Abgjlr

Condition: new, Year of construction: 2024, HD-F fiber laser cutting systems Durma fiber laser cutting machines feature faster cutting and energy efficiency, especially compared to CO2 lasers. Thanks to the high-tech fiber laser cutting technology, the laser machines are easy to operate and maintain. With the highly efficient components used in Durma fiber laser cutting machines, you are provided with quality, performance and efficiency at the same time, which increases your business value. Thanks to high-precision helical gears, very high acceleration values (28 m/s2), high movement speed (170 m/min) and positioning tolerance values (0.05 mm) can be achieved. Durma fiber laser cutting systems are unique with their stable and modular machine body, excellent filter system, compact design and efficient and user-friendly structure. X axis: 6000 mm Y axis: 3000 mm Z axis 125 mm Max. sheet dimension: 6048x2024 mm Max sheet weight: 200 kg/m2 X axis: 100 m/min. Y axis: 120 m/mm. Synrochnization: 156m/min. Acceleration: 16m/s2 positioning accuracy: + 0,05 mm Repeatability: +0,05 mm Kedpeg Adu Hjfx Abgolr Cutting thickness mild steel: 25 mm Stainless steel: 15 mm Aluminium: 20 mm Standard equipment Automatic shuttle table Control Sinumerik 840D Auto-focus cutting head Precitec Procutter F150 focus Automatic sheet position and sheet size measuring system Automatic nozzle cleaning Position laser diode Central lubrication Simple user interface Parameters

Condition: excellent (used), Year of construction: 2011, Screen PT-R 4300E Year of manufacture: 2011 SCL automatic plate loading Plates imaged: 114,000 Fuji 1-Bit Tiffbox Ksdpfxex T Tfto Abgelr Good condition.

Condition: used, Year of construction: 2018, only approx.16K plates done Format 830 x 660 mm Apogee Workflow RIP Inlinepunch Kljdsyt I Unspfx Abgsr Azura C95 Clean out unit Stacker ST 95EX Available: at short term

Condition: new, Year of construction: 2026, functionality: fully functional, color: other, CONSTMACH dewatering screens and hydrocyclone systems are specially designed for producers seeking high efficiency and quality in fine material washing processes. These systems deliver superior performance in washing materials up to 7 mm in size. Their most significant advantage is their ability to retain even the finest particles, down to 90 microns, within the material. This ensures high-quality standards, particularly in applications where preserving micronized material is critical, such as in construction sand production. Material loss encountered in classic washing systems with helical or bucket designs is minimized thanks to CONSTMACH technology. Additionally, the system offers easy maintenance, durable polyurethane screen surfaces, and the advantage of easy storage of the dry final product. These features both reduce operating costs and ensure production continuity. Dehydration Screen and Hydrocyclone Technical Specifications Kledpjxqan Tjfx Abgor MODEL: CDS-1225 Dehydration Screen Dimensions (mm): 1,200 x 2,500 Hydrocyclone Diameter: 20" Slurry Pump Motor Power (kW): 37 Vibrator Motor Power (kW): 2 x 4.5 Production Capacity (tons/hour): 60 - 80 MODEL: CDS-1635 Dehydration Screen Dimensions (mm): 1,600 x 3,500 Hydrocyclone Diameter: 26” Slurry Pump Motor Power (kW): 55 Vibrator Motor Power (kW): 2 x 7.5 Production Capacity (tons/hour): 100 - 150 MODEL: CDS-2040 Dewatering Screen Dimensions (mm): 2,000 x 4,000 Hydrocyclone Diameter: 2 x 26” Slurry Pump Motor Power (kW): 75 Vibrator Motor Power (kW): 2 x 11 Production Capacity (tons/hour): 150 - 200 Why Choose Constmach Dewatering Screens? Choosing CONSTMACH dewatering screens and hydrocyclones means not only high performance but also reliability. Superior engineering design, energy efficiency, and low maintenance requirements ensure your facility runs smoothly for years to come. CONSTMACH develops customized solutions for its customers' production needs, offering both quality and durability. Therefore, if you are aiming for an efficient washing and dewatering process, the CONSTMACH brand is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Information: The prices listed in the advertisement are shared based on current information. However, due to changes in market conditions and supply processes, our prices may vary from time to time. Therefore, we recommend requesting a quote from us for accurate pricing information.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Included: Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements! Klsdpsu Tkclofx Abgjr

Condition: new, Year of construction: 2026, functionality: fully functional, All of our products are made with care and covered for 1 year warranty! Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1640 Type - Dewatering Screen Kljdpfeyzw Hdox Abger - Capacity: 150 T/H - Size: 1600 x 4000mm - Screen Decks: 1 Deck 0.250 / 0.500 micron Polyurethane Screen - Screen Surface: 6,4 m2 - Screen Power/Spin: 2 x 8.4 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm - Discharging pipe: 219 x 10 mm installation tube - Water Consumption: 300-450 m³/h - Weight: 13000 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE A dewatering screen is a vibrating screen used in industries such as mining, sand and gravel, and construction to remove moisture from a mud mixture. By separating the solid particles from the water, dewatering screens provide an efficient way to process materials while reducing water usage and improving the quality of the final product. • Model: FABO DSHC-1635 Klodeyzw Eyjpfx Abgsr Type - Dewatering Screen - Capacity: 80-120 T/H - Size: 1650 x 3500mm - Screen Decks: 1 Deck 0.250 micron Polyurethane Screen - Screen Surface: 5.60 m2 - Screen Power/Spin: 2 x 7.5 kW 1000 rpm Vibro Motor - Screen Inclination angle: 8° - Stroke: 6-9 mm - Screen Side Sheet: ERD A1 Quality 12mm - Discharging pipe: 219 x 10 mm installation tube - Weight: 7500 kg FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Kljdpfx Aboqfcviegsr Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Kedpsx Rn Tmsfx Abgslr Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark