Used Sutco/ Nestro Cross-Flow Separator for sale (12,535)

Year of construction: 2006, operating hours: 35,000 h, condition: used, functionality: fully functional, From the dismantling of an MBT plant, one cross-flow separator from SUTCO/Nestro is available for sale. The machine was operating flawlessly until the plant was shut down. An on-site inspection in advance is essential. Dismantling of the unit must be carried out by the buyer. Further information is available upon request. Kodpfxjyhmh As Amzelr

Year of construction: 1991, condition: used, The Filtrox Cross Flow microfilter works with a permissible transmembrane pressure of 6 bar (0 °C - 95 °C) and a filtrate volume of 4.5 - 7 hl/h with a filter surface area of 26.4 m². Two pumps (20 kW) in the unfiltrate circuit transport the medium to be filtered. With 16 hl agitator tank as cleaning tank. Additional title: yeast-beer recovery Capacity: 7 hl/h Tol. operating pressure: 10 bar Kljdpfovcq Daex Amzor Tol. operating temperature: 85 °C Max. filter area: 26 m^2 Current: 4,85/2,8 A Voltage: 220/380 V Frequency: 50 Hz Operation / Control: Simatic S5 Features: 8 ceramic membrane modules (total filtration area 26.4 m2); high-pressure pump; 16 hl cleaning tank with agitator; various pipes, valves, measurement and control technology

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: GSVW-3080-1250-1-F, Cross-flow vacuum dryer with 31.68 m³ capacity The chamber holds 1 package in width at 1.20 m, 3 packages in height at 0.80 m with 0.10 m thick spacer timbers, with a maximum wood length of 16.0 m plus 0.5 m clearance. The chamber holds a net of approx. 19 m³ of trimmed timber with a wood thickness of 50 mm and a stacking stick thickness of 24 mm. Usable space: width 1.20 m, height 2.70 m, length 12.0 m Technology (see detailed performance description under Documents) - Stainless steel cylinder with 80 mm thick resin-bonded rock wool insulation and a ventilated external aluminum trapezoidal sheet cladding. - A vacuum door with special lock for easy end-side loading with walk-on trolley. - A vacuum water ring pump with a capacity of 5.5 kW evacuates the dryer (to be replaced in April 2025). - For air flow through the stacks, 12 fans with 1.5 kW rated power each in delta configuration. The average power consumption in vacuum is only about 0.5 kW per fan. Klodpowrb Nksfx Amzsr - Hot water heat exchanger for max. 98 kW at 90°C supply temperature installed - The electrical connection is 47 amperes at 3 x 400 V / 50 Hz. - Excess moisture is condensed out via air heat exchangers. - The chamber climate can be humidified as needed using a hot water heated evaporation basin. - The chamber dries fully automatically. Only the wood type, wood thickness, and desired final moisture need to be entered. - Control MB4000 V including control panel - 10 wood moisture measuring points as well as climate and temperature sensors - Run-out rails must be re-ordered, as these are concreted in. The price is ex works and must be paid net before dismantling the plant. The plant must be dismantled or removed by the buyer. Dismantling is not included in the price.

Condition: good (used), Cross chain separator conveyor 2 pieces Kljdpfx Amjndir Rezer Chain pairs 7 pieces Conveyor width ca. 5000 mm Working height ca. 1800 mm Fixed cross chain conveyor no 1 length ca 1000 mm Fixed cross chain conveyor no 2 length ca 500 mm Moving cross chain conveyors parts length ca. 500 mm Moving the separator parts with a hydraulic cylinders

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. This is an ex bakery machine, in good working condition Kodpfey D Uzqsx Amzelr

Year of construction: 2015, condition: excellent (used), SPX Separator SE161HBIV for use in the Brewery Industry Ksdpjymyhtofx Amzolr Device has minimal hours worked. In very good condition. Can be viewed on location in Cork, IE

Condition: used, Year of construction: 2003, operating hours: 4,428 h, Price: On request - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 4428 - Drive system: CNC - Control system brand: Siemens Klsdpfx Amswnidhjzor - Power [kW]: 37.0 - Operating pressure [bar]: 4137 - X-axis travel [mm]: 6500 - Y-axis travel [mm]: 3300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, operating hours: 7,600 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Kodpfoy D A Ifex Amzslr Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: used, Year of construction: 2006, Overview This crossflow filtration system was manufactured in 2006 by Germany Sartorius. The Sartoflow Compact 12 is designed for the gentle clarification of liquids, particularly in wine and beverage applications. The machine is still installed. Information regarding availability, visit possibility, maintenance history and reason for sale is Not provided. The system features a modular design with up to 12 filtration modules, of which 10 modules are functional and 2 modules are defective. Technical data  Capacity: approx. 3,600 – 12,000 L/h Application: Liquid clarification (wine and beverages) Configuration: Crossflow filtration system with hollow fiber membranes, up to 12 modules (10 active) Scope of Delivery  Crossflow filtration system | Sartorius | Sartoflow Compact 12 HF/A | 2006 | Modular system with hollow fiber membranes Filtration modules | Sartorius | 2006 | Max. 12 modules (10 functional, 2 defective) Control system | Siemens | Simatic Multi Panel | Touch control Pump system | Integrated pumps CIP / Backflush system Instrumentation | Pressure sensors, manual valves per module Kljdpfx Amoyycqlszjr

Condition: not inspected (used), Year of construction: 2007, Nestro Votecs briquetting press Type: HP 540 with hopper and agitator Automatic on/off Control cabinet Year of manufacture: 02/2007 Hydraulic operating pressure: 200 bar Hydraulic unit Filling cylinder Material cylinder Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale Kodpfx Amoyxwi Hjzolr Offered without guarantee and without warranty Machine inspection possible by arrangement

Condition: excellent (used), Year of construction: 2015, Dust extractor for capturing, conveying, and sorting all types of wood dust and chips from their sources, as well as extracting and separating settled wood chips and dust.
1 x Modular vacuum filter 9/4-30, 3 units. Fans: 2 x US-FHN 15kW
Conveyor device: 1 x rotary airlock NZRS 2140x665 Total volumetric flow: 30,000 m3/h Kledpfxsy Edxus Amzor

Condition: repair required (used), Extraction system with Nestro briquetting press Kjdpfoxy Agkox Amzjlr Untested - In need of repair Therefore, being sold at a very low price. Location: ex stock 54634 Bitburg - immediately available -

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Kedpfod Ecncox Amzelr Weight: 485 g

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Klsdpfoywzhkex Amzjr Structure: This machine features a bottom seal system suitable for fragile or heavy items. Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary.

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Technical data Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Kjdpjhw Nfqjfx Amzjlr Clean water conversion kit * Required for FlowTexturing

Condition: used, Year of construction: 2019, functionality: fully functional, FLOW Waterjet Mach 200 4020 Construction Year 2019 - fully functional Axis Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Ausstattung: - 1x Cutting Head 5-Axis - Flow CAD/CAM Kledoyfhnrspfx Amzsr - Abrasive tank - manual pump for tank cleaning - High pressure Flow Hyplex

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,853 h, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Flow Kent Mach 2 C was manufactured in 2014. It features a working area of 3000 x 2000 mm and operates with a maximum pressure of 60,000 PSI. The machine is equipped with a powerful 75 kW pump and utilizes abrasive waterjet cutting technology. If you are looking to get high-quality cutting capabilities, consider the Flow Kent Mach 2 C CNC waterjet cutting system we have for sale. Contact us for further details. • Cutting technology: Abrasive waterjet cutting • Working area: 3000 x 2000 mm • Pump power: 75 kW • Maximum pressure: 60,000 / 65,000 psi • Delivery volume: 0.91 gpm (3.4 lpm) • Voltage/Frequency/Phase: 480 V / 60 Hz / 1 Ph • Full load amps: 1.0 A • Enclosure type: 4 • Electrical diagram: 013659-DWG Klodpfxoyu S Uze Amzer • Operating hours (control): approx. 4,853 h • Pump hours (service report): approx. 7,715 h • Machine hours (service report): approx. 32,811 h • Included components (integral to machine): High-pressure system, Intensifier pump, Cutting head, Cutting tank, Operating computer / Control unit • Due to a detected play in the axes, the machine can not currently move to a reference point • Software and Flowcut must be replaced Additional equipment • Abrasive system

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 16/195245, repeat accuracy: 0.025 mm, working range: 3,660 mm, travel distance X-axis: 3,660 mm, travel distance Y-axis: 1,830 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 200 mm, table length: 4,000 mm, operating speed: 212 mm/s, table width: 2,000 mm, pressure: 6,000 bar, positioning speed: 12,700 m/min, rapid traverse X-axis: 12,700 m/min, rapid traverse Y-axis: 12,700 m/min, operating pressure: 6,000 bar, cutting speed: 7,620 mm/min, travel speed (max.): 12,700 mm/min, feed length X-axis: 3,660 mm, feed length Y-axis: 1,830 mm, feed length Z-axis: 200 mm, total width: 21,000 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, water pressure: 6,000 bar, compressed air connection: 6 bar, pump pressure: 6,000 bar, product height (max.): 200 mm, working length: 3,660 mm, input frequency: 50 Hz, power: 75 kW (101.97 HP), load capacity: 3,200 kg, throat depth: 21,000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – with precision down to 0.025 mm. This Flow IFB is not your standard waterjet system. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it belongs to the absolute top range of machines. Comparable new systems today cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BENEFIT YOUR OPERATION: - 87,000 PSI instead of the usual 60,000 PSI: This translates into 20-50% higher cutting speeds and 30-50% lower abrasive consumption, significantly reducing your unit costs in daily operation. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2-4 times the speed of conventional machines – with no need for secondary finishing. - Immediately production-ready after oil change: The system was in regular operation until August 2025. No years of downtime, no hidden damages. Operating hours can be read directly at the control unit during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without repositioning. Ideal for contract manufacturing, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard control system. Your operators are familiar with the interface, and spare parts and support are available long-term. TECHNICAL DATA: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year: 2007 Serial No.: 2006353W-044 Cutting range: 1,830 x 3,660 mm Z-axis: 200 mm Table size: 2,000 x 4,000 mm Table type: slat table with water catch basin Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. traverse speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required prior to recommissioning. Operating hours can be read directly at the Sinumerik control during inspection. SCOPE OF DELIVERY: Kjdpfx Ameyl S Nyozjlr - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D control with PC operator station - Complete abrasive delivery system - Slat table with catch basin - Complete electrical cabinets - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available for loading on site. Inspection possible at any time by appointment.

Year of construction: 2007, condition: excellent (used), Description to follow! Klsdjyr Siyspfx Amzer

Condition: ready for operation (used), Year of construction: 2021, operating hours: 900 h, number of axes: 3, This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information. • Operating hours: less than 800 hours • First commissioning: September 2021 • Working area: 4020 × 2020 mm (4 m × 2 m) • Design: Cantilever (gooseneck-type) structure • Axes: 3 axes (X, Y, Z) driven by ball screws • Software & control: FlowMaster license included; FlowMaster programming/control installed on the machine control station and an additional customer PC • Abrasive waterjet cutting system: • Cutting head: Flow PASER 4 with high-pressure ON/OFF valve • High-pressure generation: • Pump: Flow Hyplex Prime 30 ultra-high-pressure pump • Maximum pressure: 4,150 bar • Features: High efficiency with integrated autonomous cooling • Workpiece support tank: Heavy-duty painted steel tank, independent from the machine axes Additional equipment • High-pressure piping kit (from pump to cutting head) • Laser pointer for positioning (red dot for program alignment) Ksdpsx Sz A Rjfx Amzslr • UltraPierce system (abrasive suction/Venturi) for chip-free piercing of sensitive materials (glass, stone, composites, plexiglass) • EcoFlow cutting sludge extraction system with pneumatic diaphragm pumps and hopper for abrasive recovery into a big bag • Flow abrasive feeding system

Condition: used, Year of construction: 2019, functionality: fully functional, FLOW Waterjet Mach 200 4020 Kledpfsygwkxjx Amzjr Construction Year 2019 - fully functional Axis Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 200 mm Ausstattung: - 1x Cutting Head 5-Axis - Flow CAD/CAM - Abrasive tank - manual pump for tank cleaning - High pressure Flow Hyplex

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Available at short notice Year of manufacture: 1992 Capacity: 7,800 m³/h Electric motor: 11.0 kW 380 V 50 Hz Ksdpfx Aeyxf Udsmzjlr

Condition: used, Used item Features and technical data: - with manual changeover lever, painted, stable - Connection diameter: 350 mm Dimensions: approx. 1240 x 900 x 450 mm Availability: short-term Ksdpfx Aeyq T Izomzelr Storage location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Ksdpfx Aex D Rxpjmzelr Application Types Cutting

Condition: used, Year of construction: 2010, operating hours: 10,409 h, functionality: fully functional, working range: 2,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, type of input current: three-phase, input voltage: 400 V, pressure: 6,000 bar, operating pressure: 6,000 bar, input current: 120 A, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, year of last overhaul: 2026, water pressure: 6,000 bar, pump pressure: 6,000 bar, working length: 4,000 mm, input frequency: 50 Hz, We offer this used Flow FLOW Mach 4 4020b waterjet cutting system, year of manufacture 2010. Dynamic XD | 100 HP HyperJet | NEW Drive Retrofit 2026 Manufacturer: Flow Model: FLOW Mach 4 4020b Year: 2010 Machine Description For sale is a high-performance and freshly serviced precision waterjet cutting system from the global market leader FLOW, model Mach 4 4020b. This system is equipped with Flow’s high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. Special highlight for buyers: In January 2026, the manufacturer (Flow Europe GmbH) carried out a comprehensive technical service. An official drive controller retrofit kit was installed (approx. €18,000 incl. installation). As original replacement controllers for this model year are often no longer available, this upgrade offers long-term spare parts availability and modernized electronic control. A test cut was successfully carried out following the retrofit. Technical Data • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with automatic angular error correction) was used by us only for automatic angle compensation • Abrasive system: Flow Paser 4 Kledpeywtitjfx Amzer • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Electrical requirements: 400V, 50Hz, 3-phase (120A full load) Condition & Equipment • Technical condition: Immediately operational • Maintenance history: Current technical service report from the manufacturer available (January 2026) • Upgrades: New drive controllers (retrofit kit) and overhauled wiring on C-axis • Productivity: The 6,000-bar technology enables up to 50% faster cutting compared to standard systems Inspection & Transaction • The system is currently still connected and can be viewed and demonstrated under power • Location: 78549 Spaichingen (Baden-Württemberg), Germany • Viewing can be arranged at short notice by appointment Scope of Delivery • Flow Mach 4 4020b waterjet system • HyperJet 100 high-pressure pump • Control terminal including software • Technical acceptance report / service report from 01/2026 • Abrasive system: Flow Paser 4 Legal Notice (B2B): Sale only to commercial customers. Warranty, liability for material defects, and returns are excluded. Sold as seen/tested. All information is provided without guarantee, subject to errors and prior sale. If you have any questions or require further information, please feel free to contact us via message or by phone.