Cross chain separator conveyor

Condition: good (used), Cast iron bed - Floor Plate Isdpfoh Auahsx Agzotr Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

Condition: reconditioned (used), Shrinking tunnel / foil wrapper Make: Kallfass Type: semi/automatic shrinking tunnel Model: Combimatic 600 Ijdpfxog D Nyhj Agzetr Frame: steel painted Range: max. packet W x L x H = 600 x 380 x 400 mm Capacity: max. 600 packs/min Dimensions: L x W x H = 4 200 x 1 550 x 2 000 mm Weight: 850 kg Power-supply: 380 Volt - 50Hz - 23,5 kW Features: mobile water-cooled welding beam automatic / semi-automatic 2 hand control Remark: excellent condition

Condition: as good as new (ex-display), Year of construction: 2012, machine/vehicle number: 925624, Kuka unused stock item KUKA VKR210 R2700 Year of construction : 03/2012 load capacity 210 kg reach 2700mm weight 1412 kg Itedpfx Ajrfch Ujgzer Serial number :: 925625 With connection cable: X21/X31 (00-108-948) 25m and X20/X30 (00-104-744) 25m Control cabinet KRC2 ED05 Serial number: 93863 Weight: 203Kg Year of manufacture: 12/2012 Teach panel 00-107-264 VKRC2 used, fully functional / serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Axis 1: ± 185º Axis 2: -140 ° / -5 ° Axis 3: -120 ° / 155 ° Axis 4: ± 350 ° Axis 5: ± 122.5 ° Axis 6: ± 350 ° Movement speed of the robot in º / s Axis 1: 105 ° / s Axis 2: 107 ° / s Axis 3: 114 ° / s Axis 4: 136 ° / s Axis 5: 129 ° / s Axis 6: 206 ° / s

Condition: refurbished (used), Brenta bought a new one in Italy, worked a little. A complete overhaul and service was done. It is in excellent condition. Itodpfx Agoh Hnn Uezor

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Isdpfsg S Ui Aox Agzstr

Year of construction: 2024, condition: new, The LITech jaw crushers are ideal for pre-crushing extremely hard, medium-hard, hard-tough and brittle materials such as rubble, bentonite, soil, precious metals, ores, ferroalloys, glass, kaolin, catalysts, ceramics, clinker, coal, coke, minerals, non-ferrous materials -Metal, Slag and many, many more!! Itodpfega Nfcsx Agzer

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Itodpefww Sqofx Agzor Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2025, NOTICE: POSSIBILITY OF CALCULATING ANY CRANE CONFIGURATION Thank you for your interest in our offer. WNM Sp. z o.o. offers a wide range of cranes, including: gantry cranes, semi-gantry cranes, cantilever cranes, column-mounted cranes, suspended overhead cranes, and top-running overhead cranes. We invite you to submit inquiries for quotations. Our pricing is based on customer-provided data such as crane type, lifting capacity, lifting height, dimensions, and travel rail length. This advertisement refers to a gantry crane/hoist with a lifting capacity of 5 TONS. All crane components are made from high-quality materials, ensuring durability and resistance to damage even in harsh environments. TECHNICAL SPECIFICATIONS: GANTRY CRANE WITH HOIST – 5 TON CAPACITY Span Length: 6 m Lifting Height: 3.55 m Lifting Mechanism: 5-ton electric chain hoist Lifting Speed: 2.7 m/min Cross Travel Speed: 11 m/min Crane Travel Speed: 10 m/min Work Class: A3 Power Supply: 380V/50Hz/3-Phase Control Mode: Pendant control + remote control Itsdpfx Agov Ni Rxezsr We issue VAT invoices for all machines. For any inquiries, please feel free to contact us.

Condition: good (used), Year of construction: 2002, functionality: fully functional, GOMA FC -10 KZ6 finger jointing wood joining line Polish production year of production 2002 DTR with declaration of conformity TECHNICAL PARAMETERS: wood width min / max - 40 / 160 mm thickness of wood min / max - 25 / 80 mm length of a single glued section 6000 mm compression force 7500 kG / 100 atm Itodpfx Agjt Sfz Ijzer SAW saw blade diameter 300 mm motor power 6 kW milling machine power 15 kW PRESS hydraulic pump power 4 kW working pressure 100 bar

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Itjdoihpn Njpfx Agzor Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)