Double post hydraulic press

EMANUEL DEA 400/2000

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Fpedpowf Sfvefx Afnjc

Condition: used, functionality: fully functional, operating hours: 4,189 h, fuel type: diesel, mast type: duplex, FORKLIFT TCM FD25Z1 IZUSU ENGINE DIEZEL SHORT MAST.....START AND DRIVE..... Fedpfx Ajt U Ivtsfnopc

Condition: excellent (used), Hello, we offer used Erowa PalletSetW vices. They have been cleaned and checked by us. ER-025895 Vice PalletSet W 40mm Fpjdpfx Afjitcq Tsnjc ER-054922 flat vise 8mm PalletSet W ER-055774 Vice 0-170mm In addition, a functional test was carried out. The vices have slight signs of wear and are technically in very good condition. Individual purchase also possible. Spare parts are also available Do you have any questions? Then we are at your disposal.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Fjdsvrxd Hepfx Afnspc Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: SK 40 Magazine positions SK 40: 60 Equipment: - 3D path control MillPlus IT - Horizontal double-arm tool changer - Automatic swivel milling head - Rotating safety glass - NC rotary table with pallet carrier Fsdju Rnlujpfx Afnspc - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B axis SK 40 (only in combination with SK 40 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4 extended manual intervention - Rinse gun with pump - Tool breakage control SK 40 mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent chip conveyor operation - Internal coolant supply switchable from 40 bar to 80 bar

Condition: good (used), Make: OMERA Fpjdpfx Afekvnumsnec Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill Fsdpfxsh Di H Do Afnjpc -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Fodjfw Ah Rspfx Afnepc Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 03.2133, Arthur Klink - internal broaching machine (KOM 138) machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 16 x1250 x400 built in: 1983 stroke: 1250mm pulling force: 16.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: in an excellent condition, ready to use, perfect slides Optional accessories available on request: pulling head, pick up tool holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke Fodpfx Ajd Nb A Nsfnopc

Year of construction: 2006, condition: ready for operation (used), A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Fsdpfovi N D Ssx Afnspc