Used Test Pin Set for sale (23,367)

Condition: used, Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm Lsdog T I Nhspfx Agvsrn -Weight: 0.3 kg

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Test system for single-sided testing of SMD PCBs Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Lrjdpfx Agjxcivqsvjn Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 4NTV88BXIHR, overall weight: 848 kg, fuel type: diesel, tank capacity: 190 l, color: red, power: 16 kW (21.75 HP), output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 16 kW (21.75 HP), nominal power (apparent): 20 kVA, continuous power: 16 kW (21.75 HP), continuous power (apparent): 20 kVA, total length: 2,150 mm, total width: 1,040 mm, total height: 1,550 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: Yanmar, type of cooling: water, fuel consumption (combined): 3 l/100km, fuel consumption (urban): 3 l/100km, fuel consumption (extra-urban): 3 l/100km, fuel: diesel, fuel tank capacity: 190 l, battery capacity: 100 Ah, battery voltage: 12 V, input voltage: 380 V, input frequency: 50 Hz, input current: 32 A, operating temperature: 25 °C, ambient temperature (min.): -25 °C, ambient temperature (max.): 45 °C, control cabinet height: 1,550 mm, control cabinet length: 2,150 mm, control cabinet width: 1,040 mm, noise level: 65 dB, protection type (IP code): IP65, rotational speed (min.): 1,500 rpm, temperature: 25 °C, type of input current: three-phase, warranty duration: 12 months, Equipment: documentation/manual, mobile diesel tank, De Bredenoord 20 KVA generator is een betrouwbare en veelzijdige oplossing voor tijdelijke en langdurige stroombehoeften in diverse omgevingen. Het aggregaat is ideaal voor mobiel gebruik en voldoet aan de emissie-eisen van Stage V. De efficiënte Yanmar motor, gecombineerd met een Stamford generator, levert uitstekende prestaties en lage operationele kosten. De generator is uitgevoerd in een geluidsisolerende omkasting die zorgt voor een minimale geluidsuitstoot, ideaal voor gebruik in geluidsgevoelige omgevingen (super silent). De kast is voorzien van dikke, oliebestendige geluidsisolatie en externe stekkerdozen met zekeringautomaten voor extra veiligheid. Met een brandstoftank van 190 liter heeft de generator een autonomie van maximaal 48 uur bij continu gebruik. Het systeem werkt op diesel, HVO of GTL brandstof, wat zorgt voor flexibele brandstofopties. ### Technische Specificaties: - Model: Bredenoord 20 KVA - Nom. vermogen: 20 KVA - Max. vermogen: 20 KVA - Motor: Yanmar 4TNV88BXIHR - Generator: Stamford borstelloze alternator (AVR) - Vermogen: 20 KVA - Voltage: 230/400 V, 50 Hz - Toerental: 1500 tpm - Geluidsniveau: 65 dB(A) op 7 meter - Brandstoftank: 190 liter - Autonomie: - 100% PRP: 40 uur - 70% PRP: 56 uur - Motorvermogen: 16 KW - Batterijlader en motorverwarming: Standaard aanwezig - Control panel: Comap MRS16 (auto start/stop) - Afmetingen (L x B x H): 3,38 m x 1,03 m x 1,5 m - Gewicht: 848 kg - Emissieklasse: Stage V ### Brandstofverbruik: - 100% PRP: 4.7 L/h - 70% PRP: 3.42 L/h - 50% PRP: 2.3 L/h ### Opties: - Motorverwarming - Batterijlader - 3-weg brandstofkraan - XXL brandstoftank Geluidsdemping: De generator is ontworpen met geoptimaliseerde luchtinlaten en speciale isolatiematerialen die geluid minimaliseren. De geluidsisolatie is versterkt met wol van verschillende diktes om geluid over een breed frequentiespectrum te reduceren. Dit maakt het ideaal voor gebruik in geluidsgevoelige gebieden. Duurzaamheid: De omkasting is bestand tegen corrosie dankzij een verflaag die getest is voor meer dan 2000 uur (C5I-H). Dit zorgt voor een lange levensduur, zelfs in de meest uitdagende omstandigheden. Veiligheid: De generator is uitgerust met versterkte sloten en roestvrijstalen scharnieren. De deuren zijn ontworpen met een afgeschuinde hoek van 20 graden om waterophoping te voorkomen en oxidatie te minimaliseren. Transport en Verplaatsing: De generator is gemakkelijk te verplaatsen dankzij versterkte hijsogen en stalen balken, die zorgen voor eenvoudig transport op bouwlocaties. Het ontwerp zorgt voor een stabiele en veilige verplaatsing van de generator zonder risico op schade. Klantspecifieke Aanpassingen: De Bredenoord 20 KVA generator is beschikbaar in verschillende uitvoeringen, van 20 KVA tot 500 KVA. Klantspecifieke aanpassingen zijn mogelijk, waardoor de generator kan worden aangepast aan specifieke eisen en toepassingen. Certificeringen: - CE-gecertificeerd - Europese makelij Lrodpov Rncisfx Agvon Toepassingsgebieden: De generator is geschikt voor diverse sectoren, waaronder de bouw, industrie en andere toepassingen waar betrouwbare en efficiënte stroomvoorziening vereist is.

Condition: refurbished (used), Year of construction: 2010, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200-3 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Included: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant +1 Hertz Spindle Motor (New) + Delta Spindle (Set with the Mechanical System) + Tool Changer Table Not Included: 7th Axis, Engineering Design and Consultancy Shipping: NOT included in the price Payment: 100% payment before collection Lrodpfxjq Dpxds Agvon

Condition: refurbished (used), Year of construction: 2010, operating hours: 25,000 h, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Lrjdjgi Dztspfx Agven Brand: KUKA Model: KR200 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + 2 Spindle Motors ( Set with Mechanical System ) + Electrical Panels + 2 Servo Drives + Cable Set + 8 DI / 8 DO Shipping: NOT included in the price Payment: 100% payment prior to collection

Condition: used, functionality: unexamined, Ferwood code: RU0011647 - Manufacturer code: K6343K0943 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Lsdpewtnlhofx Agvorn

Condition: used, functionality: unexamined, Ferwood Code: RU0011646 - Manufacturer Code: K6343K0947 - Condition: Used - Functionality: Not tested - If interested, we offer an overhaul service, please contact us. Lsdpfx Aowtnimsgvorn

Condition: used, functionality: unexamined, Ferwood Code: RU0011653 – Manufacturer Code: K6343K0948 – Condition: Used – Functionality: Not tested – If interested, we offer a refurbishment service, please contact us. Lrodpfx Aewtzd Degven

Condition: as good as new (ex-display), Year of construction: 2026, throat depth: 320 mm, total height: 620 mm, total width: 840 mm, total length: 850 mm, measuring range Z-axis: 400 mm, workpiece weight (max.): 200 kg, height adjustment type: mechanical, DuraVision 30 G5 small load/macro hardness testing machine for Brinell, Rockwell, and Vickers testing, conforming to standards according to EN ISO and ASTM, as well as carbon testing according to DIN. Torsionally rigid gray cast iron base for the main load range 3 kg - 3,000 kg (29.43 N - 29,420 N) PLC measuring and control electronics for monitoring the application of the load with automatic test load change and manual table height adjustment via handwheel 12MPix color camera for 3-stage zoom Motorized pivoting 3-position turret incl. 1 objective lens and 1 indenter adapter Removable clamping jaws with clamping inserts enable unclamped and clamped testing Test height 0 - 400 mm, outreach 320 mm Specimen table, support diameter 90 mm Maximum specimen weight 200 kg High-performance LED incident lighting Capacitive 10" touch display with LED backlight Integrated PC with Win 10 IoT 64-bit and 128 GB SSD storage Interfaces: 4x USB 3.0, 1x Displayport, 1x HDMI, 2x RJ45 ecos Workflow Touch Basic operating software incl. 1 test method ecos IMAGE for fully automatic, standard-compliant image analysis of Vickers, Knoop, and Brinell Lsdezfnpbopfx Agvjrn Automatic brightness control and autofocus with statistics and test report function ecos templates for frequently used settings ecos CODE for reading and creating QR codes ecos EXPORT EDITOR for individual customization of the export data (format: PDF, Excel, XML, CSV) User management for individual customization of access rights in ecos Workflow Touch ecos xChange - standardized data interface for bidirectional data connection (ERP, CAQ) ecos Workflow Calibration Information System supports the execution and documentation of all standard-relevant checks of the hardness tester (periodic and indirect testing of the calibrated methods). Note: An additional hand scanner is required to read a QR code (not included in the scope of supply). NKW28E05Z Ball holder 28 mm length, diameter 6.5 mm with 5 mm ball press-fitted in with certificate (EN ISO) NKW28E10Z Ball holder 28 mm length, diameter 12 mm with 10 mm ball press-fitted in with certificate (EN ISO) L25HBDVG5 Objective lens 2.5x with Brinell SmartLight evo incl. adapter for turret for better evaluation of Brinell indentations (for DV 20/30/200/300/250/350 G5) Z46ZR Base / tool cabinet ZRG for seated and standing use max. specimen weight 500 kg Dimensions (WxHxD): 840 mm x 620 mm x 850 mm Maximum load / drawer: 10kg Best regards

Condition: new, functionality: fully functional, Year of construction: 2025, NEW! Professional quality with reinforced 4-square shank. Hydraulic earth auger set Ø150/200/300 mm ❗ ONLY €899 ❗ Warehouse clearance – available immediately! ⭐ NEW – unused – ready for immediate use! ⭐ Complete set including 3 augers + motor + extension ⭐ OPEN-S mount – flexible & universally adaptable ⭐ Significantly below market price! ❗ Reinforced design: All augers feature a robust 4-square shank. This ensures maximum power transmission, high stability, and significantly increased resistance to twisting and stress. ⭐ SCOPE OF DELIVERY: ✔ 3 drilling diameters (150 / 200 / 300 mm) ✔ Hydraulic motor ✔ Hydraulic hoses ✔ OPEN-S mount Everything new. Everything included. No need for additional purchases. ⭐ Advantages of the OPEN-S mount ✔ Universally adaptable ✔ Ideal for workshop conversions ✔ Perfect for export ✔ Quickly adaptable to various machines ✔ Saves expensive quick-change adapters Lrsdpjylk Nrjfx Agvjn The open mount offers maximum flexibility during assembly and is ideal for individual adaptations to various excavators and mini-excavators. ⭐Depending on the model, suitable for mini-excavators between 1.8 t and 2.5 t. The difference lies in the pin diameters and distances. Please specify the machine type or pin dimensions when requesting information. ⭐Perfectly suited for: ✔ Fence construction ✔ Foundation work ✔ Screw foundations ✔ Planting holes ✔ Garden and landscape construction ✔ Construction and agricultural projects Shipping and collection possible – warehouse in Rheda-Wiedenbrück Contact us at any time – quick response!

Condition: new, Professional test cover (prufhaube) from the renowned German manufacturer SCHLEICH – model 13-R2. The device is designed for laboratory and industrial use, ensuring maximum safety during high-voltage electrical testing. The unit is in factory-new, warehouse condition – it has never been used. ⚙️ Technical specifications: manufacturer: SCHLEICH (Germany) model: 13-R2 type: test cover / prufhaube year of production: 04.2023 serial number: 21942 country of origin: Germany ✅ Key features: professional test zone (“forbidden zone”) transparent cover – full process control safety system (locks / sensors) Lrjdsy Aggcepfx Agvjn robust industrial construction high manufacturing quality – made in Germany ideal for HV/electronics/production testing 📦 Condition: New – warehouse stock, unused. May have minimal storage marks. 📸 Included: device as shown in the pictures

Condition: good (used), Hardness tester, fully functional Lrjdpfx Ajy H H Nfegven Upon request, transport and loading can be organized throughout Europe at an additional cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your equipment? For further information or contact options, please reach out via the contact form.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material inspection Testing of tensile strength, bond tensile strength, and shear strength of masonry & wood joints, and similar applications. - Nail pull-out test - Compression test on cement and mortar prisms - Flexural test on cement and mortar samples - Compaction test - Flexural test on wood, concrete - Shear strength test on wood Ljdjxmv H Rspfx Agvern - Splitting tensile strength test on wood - Scaffold connection test - Shear strength test on masonry - Tensile test on masonry - Tensile test on reinforcing steel - Tensile test on wood - Pull-out test on reinforcing steel - Reverse bending test on reinforcing steel - Dowel pull-out test - Adhesion tensile test I have made a video demonstrating the machine's operation. I can send this video to a mobile number via WhatsApp or Signal!

Condition: used, Concrete sample press for concrete and material testing Lredpfoxb Nv Uex Agvsn Flexural strength test Determination of compressive strength

Condition: new, functionality: fully functional, Year of construction: 2024, This powerful, hydraulic pile rammer from Maruzen is a good choice if you are looking for a strong machine for striking steel and wooden piles. The Maruzen KH193 comes standard without impact piece. Easy and fast to use As many as 1920 blows per minute Operates on hydraulic power source such as a power pack or earth mover Can be used in wet conditions, even underwater Minimal service required; lubricate head every 50 hours and service every 500 hours. Hydraulic powerhouse The KH193 pile rammer is a perfect choice when ramming steel pipes, for example 60 x 40 mm or ø 60 mm, but it is also suitable for wooden piles up to a diameter of 110 mm. It weighs 20 kg and is more powerful than our gasoline rammers. This type of pole rammer offers many possibilities: Maruzen's hydraulic powerpack is intended for mobile purposes and is known for its easy way to use. This powerpack UH070 is matched with the AY01H horizontal auger, the OH01 hydraulic one-man auger and the KH193 pile rammer from Maruzen. This type of powerpack offers many possibilities in: Assembly Fencing Foundation work Guardrail/boarding work Installing solar parks This hydraulic power pack is powered by a Honda GX200 gasoline engine and is delivered fully assembled, on a metal frame with large wheels. Ljdpfxertqydo Agvern Benefits: Low fuel consumption; 1.6 Liters per hour at full power 20-25 Liters per minute Low noise level Light weight (40 Kg) Honda GX200 4 stroke engine (low emission) Very easy to use. EuroGate International offers affordable quality and service Maruzen is a reliable machine builder from Japan, for all kinds of hydraulic tools. The top brand offers excellent quality and service. Maruzen has been producing hydraulic machines since 1954.

Condition: used, For sale are the Multivac forming and closing tools shown in the pictures. There are 2 sets. Each for a foil width of 420mm. Multivac 19.200.1240.95 Lodpfxswth Uio Agvsrn 6x11cmx18cm tray size. Price: 2000 eur the other is 9x11.5cmx11cm item number 105793236, price 2000 eur.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Ledpjrtrzdofx Agvsrn Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t Ledjvr Hf Eopfx Agvorn dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Ledpfow N S E Aox Agvern Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: excellent (used), Heavy duty cheese dicing machine, has auto load and discharge conveyors. It was bought new in 2017 and hardly used. Photos show machine without the conveyor belts fitted. These will be replaced with new ones Lodeqgfb Depfx Agvjrn

Condition: excellent (used), Haida Type: HD-B604-S Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Unit: G, kg, N, LB (adjustable) Resolution: 1/250,000 Lrsdpfszgr Eiox Agvjn Accuracy: ± 0.5% Max. stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Chuck range: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch VC³ 0034 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Machine Type: Climate Test Chamber / Climate Chamber Test Chamber Volume: approx. 335 liters For sale is a used climate test chamber from Vötsch for temperature and climate testing in laboratories, research, development, and quality assurance. Technical Data Test Chamber Dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing Dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Temperature Range: -10 °C to +90 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +89.5 °C Temperature Homogeneity: ±0.5 to ±1 K Temperature Deviation: ±0.1 to ±0.5 K Heating Rate: approx. 1 K/min Cooling Rate: approx. 0.3 K/min Max. Heat Compensation: approx. 200 W Lrodszgb Awopfx Agvon Refrigerant: R404A Filling Quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power Connection: 230 V / 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Protection Class: IP54 Weight: approx. 490 kg Equipment SIMPAC control system Temperature and humidity control Stainless steel test chamber Ethernet, USB, RS232, RS485/422 Test item protection function Cable glands Application Areas Climate testing Temperature testing Material testing Electronics testing Quality assurance Research and development Scope of Supply Vötsch VC³ 0034 Climate Test Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures For the safety of our customers, the offered climate chambers are tested before delivery, if necessary, filled with legally compliant refrigerant, subjected to a leak test, and delivered with a documented test run. Subject to change and errors in technical data as well as prior sale.

Condition: excellent (used), RS Simulators Type: ST2K320/45 K Shock test system, water-cooled Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Temperatures in the lower test chamber Ledpfxjzgbutj Agvjrn Temperature range: -40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Humidity levels in the upper test chamber Climate temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (± 2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Total power: 13 kVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock testing system Operating climate range Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant Lsdjzgbumopfx Agvern 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Primus Engineering Type: DST 350 This testing equipment was designed for performing IP protection class tests for "dust" according to, for example, DIN 40050 Part 9 and DIN EN 60529. The testing equipment is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Predefined test sequences Integrated vacuum circuit with flow measurement Technical data: Lrjdpfx Aozgbtisgvsn Total electrical power: Max. 5 kW Connection voltage: 400V/50Hz 3-N/PE (16A CEE socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.