Used Xerion Batch Furnace System for sale (35,233)

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Isdpfxstndwuj Abgeia

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement Iodoyt Ihbopfx Abgjia The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: good (used), Year of construction: 2005, Pusher Furnace System (PUS1), Manufacturer: Ipsen International GmbH, Type: PP-2-65x65x65-18-G, Serial No.: AN 10.1595-01, Year of manufacture: 2005, Fuel: Gas/Natural Gas/Nitrogen/Methanol, 414 kW, 296 kVA comprising: Two-Chamber Pre-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, Washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Preheating Furnace, Type: DL 65x65x65 4-G, 25 A, 9.5 kVA, natural gas heated, 80-100 mbar, 350-500°C Iodpfx Absyabxysgjia Pusher Gas Carburizing Furnace (Double Line), Type: PP-2 65x65x65-18-G, natural gas heated, 86 A, 29.6 kVA, 10 kWh/m³, 80-100 mbar, 860-950°C, 140 pieces per batch, 695 kg/h Oil Quenching Bath (Hardening Oil), Type: QO-65x65x65-E, 161.5 A, 93.1 kVA, electric, air cooling, 6 m³ tank volume, 120°C max., 60-80°C working temperature Two-Chamber Post-Washing Machine, Type: WPSSB-65x65x65-E, 302 A, 199 kVA, electric, washing tank 2 m³, rinsing tank 2 m³, 60-80°C Pusher Tempering Furnace, Type: DL-65x65x65-6-E, 126.8 A, 84 kVA, electric, 300°C max. furnace temperature, 150-240°C working temperature Batch Transport System, Measuring, Control, and Switch Cabinet with Conti-Control System, Type: CO/CO2-2 Batch Data: Case hardening for transmission parts 650 mm x 650 mm x 650 mm, max. 280 kg, batch transport height 800/2,200 mm

Year of construction: 2024, condition: like new (used), functionality: fully functional, System Overview Complete modular chamber furnace system for batch homogenising of aluminium extrusion billets, electrically heated with jet-heating, waste-heat recovery, and full automation. CE-certified (Machinery Directive 2006/42/EG). Ijdpfx Ajyuvq Tjbgjia Scope of supply: 1× Preheating furnace (BSN 1607) — electric, jet-heating 2× Holding furnaces (BSN 1608, 1609) — electric, forced air circulation 2× Heat-exchanger furnaces (BSN 1610, 1611) — unheated, forced air circulation 1× Charging machine (BSN 1612) — electric/hydraulic 12× Charging racks (BSN 1614) Control cabinet with Siemens S7-1515F 2PN (Profinet) PLC and operator panel Pusher thermocouples for direct billet temperature measurement Key technical advantages: Jet-heating for fast, uniform billet heating (typically 3–4× faster than conventional convection furnaces) Integrated heat-exchanger furnaces for efficient waste-heat recovery — reduced energy consumption and operating costs Overtemperature operation possible — shorter cycle times with direct billet temperature monitoring Suitable for homogenisation and/or solution heat treatment / ageing Modular design — suitable for new installations and retrofits of existing lines Ideal for: Aluminium extrusion plants and casthouses seeking to optimise energy consumption, CO₂ footprint, and throughput. Further technical details available upon request (PDF with full specifications).

Year of construction: 2000, condition: repair required (used), We are offering this SAFED conveyor belt furnace in need of repair, year of manufacture 2000. Numerous spare parts are included. Iijdpfsyr Atpjx Abgsa Manufacturer: Safed Model: 1 used continuous furnace Year of manufacture: 2000 Operating temperature (hardening furnace): 870-930°C Gas power: 240 kW A Max. gross batch weight: 400 kg/h Max. batch width: 600 mm Quenching type: oil Tempering furnace: Gas power: 215 kW Operating temperature: 170-650°C Max. batch weight: 400 kg/h Washing machine: Max. batch weight: 400 kg/h The system is still operational until the end of March 2026. Several spare parts are also included. Original purchase value approx. €85,000. All prices are ex works Kehl; disassembly and all subsequent costs are the responsibility of the buyer. VAT is not included in the prices. Subject to prior sale and errors. Used equipment is sold without any warranty or guarantee. We cannot be held liable for personal injury or property damage during disassembly by the buyer. Place of jurisdiction is Germany. All agreements are made under German law. The material remains the property of the seller until full payment has been received. If you have any questions or require further information, please feel free to write us a message or give us a call.

Year of construction: 1985, condition: used, For sale Batch annealing furnace – completely customs refurbished in 2010. With 2 furnace lids made of stainless steel – new ( 2020 and 2025). Iisdpfoyqyf Hox Abgja Original manufacturer : LEE WILSON ENGINEERING Company. CLEVELAND OHIO 3m diameter x 3 m height size of charge Protection Gas: HNX (Nitrogen-Hydrogen) -Pression in cover :8 mbar. Fan rotation:750r/min. Cooling: Air jet cooler (Max 60°c/hour depending on the charge) The atmosphere can be changed, currently at 95/5% H N. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2014, Overall dimensions: 12.4 x 18.8 m incl. safety fencing Number of baskets per oven: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Max. load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, external dimensions: 2,950 x 6,400 x 7,800 mm Max. temperature: 600 °C Operating temperature: 510 °C Total heating capacity: 2 x 81 kW = 162 kW electric Quenching water bath: Type = QT-24.16.57/71E Temperature bath max.: 70°C, chamfering volume = 20 m^3 2 ageing furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Oven temperature max.: 250°C Isdpfx Aboyiaf Iegjia Operating temperature: 180 °C Total output: 2x 40.5 kW = 81 kW Electrical storage/retrieval section, Gea cooling coil, protective housing, safety equipment, system control 1,056 annealing baskets with stanchion pallets System already dismantled, packed and stored

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Advantages of chilled ice water: + Consistently low discharge water temperatures + Precise dough temperature control year-round + Rapid gelatinization during mixing without ice + Softer doughs thanks to freshly chilled, liquid ice water + Precise dosing possible via water mixing and metering unit + All water-contact parts are stainless steel and require no cleaning Iodpfsivdvcox Abgsia + Hygienically perfect potable water Langheinz ice water units stand out for: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valve + Electronic ice bank controller + Stainless steel evaporator + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water reservoir + Drain tap in the ice water reservoir + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall console (for model L60 + L100): + €319 net - Machine table (for model L100): + €389 net - 3-way changeover valves --- For water mixing and metering units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters/hour - Peak cooling output*: 180 liters/hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1.189 kW - Power supply: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters/min - Dimensions: 950 x 530 x 560 mm (LxWxH) - Net weight: 60 kg - Energy consumption for 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12-month warranty Advantages of chilled ice water: + consistently low discharge water temperatures + precise dough temperature control all year round + rapid swelling when mixing without the need for ice + improved dough quality thanks to freshly chilled, liquid ice water + precise dosing possible with water mixing and dosing unit + water-carrying parts made of stainless steel, maintenance-free + hygienically clean potable water Langheinz ice water systems are characterized by: + constant, low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank regulators + stainless steel refrigeration evaporator + multi-stage stainless steel water heat exchanger + insulated stainless steel ice water bath + drain tap in the ice water bath + high flow capacity + compact dimensions + easy-care surface structure + low energy consumption SPECIAL accessories, optionally available at extra cost: - Wall bracket, stainless steel (for models L130 & L170): + €499 net - Machine table (for models L130 & L170): + €589 net - 3-way changeover valves --- for water mixing and dosing devices with only 2 inlets (cold/warm) + €349 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters/hour - Peak cooling output*: 230 liters/hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1.189 kW - Power supply: 230 V - 50Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow at 2 bar: 15 liters/min - Dimensions: 560 x 590 x 900 mm (LxWxH) Iiedpsivdvkefx Abgea - Net weight: 60 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * with +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New unit 12 months warranty Advantages of chilled ice water: + Consistently low dispensing water temperatures + Precise, year-round dough temperature control + Rapid swelling during mixing without the need for ice + Improved dough texture thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing device + Water-carrying components are made of stainless steel and require no cleaning Iedpfx Aoivdu Ujbgjia + Hygienically flawless, clean drinking water Langheinz ice water systems are distinguished by: + Consistently low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel plate heat exchangers + Insulated stainless steel ice water bath + Drain valve in the ice water bath + High flow rate + Compact dimensions + Easy-to-clean surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - Stainless steel wall bracket (for models L60 + L100): + €319 net - Machine table (for model L60): + €399 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349 net Technical data: - Batch size (recommended): up to 15 liters - Continuous output*: 50 liters / hour - Peak cooling capacity*: 90 liters / hour - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Electrical connection: 230 V - 50Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (LxWxH) - Net weight: 50 kg - Energy consumption at 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Advantages of cooled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without the use of ice + Improved dough texture thanks to freshly cooled, liquid ice water + Accurate dosing possible via water mixing and dosing unit + All water-contacting parts are made of stainless steel and maintenance-free + Hygienically perfect, clean drinking water Langheinz ice water systems are characterized by: + Constantly low water temperatures + High-performance refrigeration units + Refrigeration systems with expansion valves + Electronic ice bank controllers + Stainless steel evaporators + Multiple stainless steel water heat exchangers + Insulated stainless steel ice water baths + Drain tap in ice water bath + High flow capacity + Compact dimensions + Easy-to-maintain surface structure + Low energy consumption SPECIAL accessories, optionally available at additional cost: - Stainless steel wall bracket (for model L130 + L170): + €499 net - Machine table (for model L130 + L170): + €589 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters / hour - Peak cooling capacity*: 330 liters / hour - Ice bank: 40 kg - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Electrical connection: 230 V - 50Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch Iiodpfxsivdvve Abgja - Water flow at 2 bar: 20 liters / min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption per 100 liters: 1.5 – 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2025, condition: new, functionality: fully functional, New device 12 months warranty Benefits of chilled ice water: + Consistently low discharge water temperatures + Precise year-round dough temperature control + Rapid swelling during mixing without ice + Smoother doughs thanks to freshly chilled, liquid ice water + Exact dosing possible via water mixing and dosing unit + Water-carrying parts are made of stainless steel and are maintenance-free + Hygienically flawless, clean drinking water Langheinz ice water systems feature: + Consistently low water temperatures + High-performance refrigeration units + Cooling systems with expansion valve + Electronic ice bank controller Iodpfx Asivdv Dobgjia + Stainless steel cooling evaporators + Multi-stage stainless steel water heat exchangers + Insulated stainless steel ice water tank + Drain cock in ice water tank + High flow rate + Compact dimensions + Easy-care surface structure + Low energy consumption SPECIAL accessories, optionally available at extra charge: - 3-way switching valves --- For water mixing and dosing units with only 2 inlets (cold / hot) + €349 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters / hr - Peak cooling output*: 500 liters / hr - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Electrical connection: 400 V - 50Hz - 1Ph - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 liters / min - Dimensions: 1170 x 630 x 770 mm (LxWxH) - Net weight: 145 kg - Energy consumption at 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2020, condition: like new (used), functionality: fully functional, Fully automatic sintering continuous furnace system Manufacturer: Sarnes Model: 600-G/CQI-9 Year of manufacture: 2020 (commissioned 2021) Programmable, with online diagnostic system. Fuel: natural gas Hydrogen + nitrogen (N2+H2) operation integrated The system has seen very little use and is in excellent condition. Offer / Quotation Date: 18.1.19 620 mm belt width, gas heated, N2/H2 operation, LED dewaxing zone, rapid cooling section (Pos 2), flameless discharge and ceramic muffle, Heating: low NOx RS Rekudrall burners, SiSiC burner tubes, installed heating capacity 320 kW in 8 zones, dual thermocouples, 100 mm usable height. LED 3 dewaxing zones ("low energy dewaxing" – utilization of chemically bound energy of the waxes and improved burnout conditions especially for heavy PM parts (>0.9 kg)). Dimensions: - Infeed table 2 m (target-actual belt speed compensation) - LED3 dewaxing zone: 1.5 m - Sintering zone length 7.5 m - Rapid cooling length 1 m - Convective cooling zone length 2 x 4 m - Flameless discharge with air shower 2 m - Outfeed table 2.7 m - Total system length 23.7 m - Width 2.3 m Iedexfcdyjpfx Abgeia Connection ratings: Heating: installed power 320 kW Natural gas: 25 m³/h (80 mbar) N2: 45-65 m³/h (max. 80 mbar) H2: 0.5 - 15 m³/h (80 mbar) Cooling water: 3-5 m³/h (non-pressurized; temp.

Condition: used, Year of construction: 2013, operating hours: 6,000 h, functionality: fully functional, the following is included: - Hardening furnace (vacuum oil quenching furnace) - Control cabinet for hardening furnace - Internal water tank with pump units and control box - Control box for water cooling - Internal nitrogen pressure vessel Iiedswlvhhepfx Abgsa - External platform for cooling unit + connection points for nitrogen batteries (nitrogen battery containers not included, must be rented) - 7 hardening baskets - Red transport and loading trolley - Parts washing tank for complete baskets with compressed air and drip tray -> System has approx. 6,000 operating hours -> The pictures are up-to-date, only the date on the images is not correct

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. Iijdpfxowm Nq Ee Abgja • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Condition: used, axle configuration: 1 axle, first registration: 05/2020, loading space length: 11,150 mm, loading space width: 2,450 mm, loading space height: 2,670 mm, total length: 11,650 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift = Remarks = Number of axles: 1, Curb weight: 5,720 kg, Gross weight: 25,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2020, Axle type: BPW, Tail lift, Tail lift type: Rear flap, Tail lift capacity: 1,500 kg, Tail lift manufacturer: B.A.R cargo lift, Tail lift material: Steel, Tail lift dimensions: 200x254, System Trailers manufacturer, Kelberg brand = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steerable; Tyre tread left: 12 mm; Tyre tread right: 11 mm Weights Unladen weight: 5,720 kg Payload: 19,280 kg Gross vehicle weight: 25,000 kg Iijdpfewbzq Tex Abgea Functional Tail lift: B.A.R cargo lift, rear flap, 1,500 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognisable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registrations are processed quickly • Expert technical services • The security of 'recognisable quality' • And more.... Please visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an enquiry via our website. Ask directly for our European warranty package.

Condition: used, axle configuration: 1 axle, first registration: 05/2020, loading space length: 11,150 mm, loading space width: 2,450 mm, loading space height: 2,670 mm, total length: 11,650 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2020, Equipment: ABS, tail-lift, = Other Options and Accessories = - EBS - Tail lift = Remarks = Iodpfx Abowbzqmsgeia Number of axles: 1, Curb weight: 5,700 kg, Gross weight: 25,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2020, Axle type: BPW, Tail lift, Tail lift type: Rear flap, Tail lift capacity: 1,500 kg, Tail lift manufacturer: cargo lift, Tail lift material: Steel, System Trailers manufacturing, Kelberg brand = Further Information = General Information Cabin: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tyre tread left: 12 mm; Tyre tread right: 11 mm Weights Unladen weight: 5,700 kg Payload: 19,300 kg Gross vehicle weight (GVW): 25,000 kg Functionality Tail lift: cargo lift, rear flap, 1,500 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing selection • Recognizable quality • Good prices • Correct business practice • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates quickly arranged • Professional technical services • The security of "recognizable quality" • And more…. Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask us directly about our European warranty packages.

Condition: used, axle configuration: 2 axles, first registration: 10/2021, loading space length: 13,600 mm, loading space width: 2,440 mm, loading space height: 2,670 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 2021, Equipment: ABS, tail-lift, = Additional Options and Equipment = - EBS - Tail lift = Notes = Number of axles: 2, twin tires, chassis type: full chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air, ABS, EBS, body year: 2021, axle type: SAF, tail lift, tail lift type: rear flap, tail lift capacity: 1500 kg, tail lift material: aluminium, tail lift dimensions: 200x254, MAKE IS KEL-BERG / TRIDEC STEERING / TAILLIFT = Further Information = General Information Cab: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tyre size: 275/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Twin tires; Lift axle; Tyre tread left inside: 9 mm; Tyre tread left outside: 9 mm; Tyre tread right inside: 7 mm; Tyre tread right outside: 8 mm Axle 2: Twin tires; Steering; Tyre tread left inside: 9 mm; Tyre tread left outside: 12 mm; Tyre tread right inside: 12 mm; Tyre tread right outside: 13 mm Functional Tail lift: Rear flap, 1500 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damages: none Iijdjyz Nt Nopfx Abgja = Company Information = Kleyn Trucks is one of the world's largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our stock includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing inventory • Recognizable quality • Good pricing • Sound business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Easily calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A Isdpfxoyc H N Ns Abgoia • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems here. The systems are in very good condition and fully functional. Inspection by appointment possible. Item 1 System 3R-203 Rotary Element WEDM 360° Item 2 System 3R-201J Adapter WEDM 90° Item 3 System 3R-201J Adapter WEDM 90° Item 4 System 3R-201J Adapter WEDM 90° Item 5 System 3R-202 MiniBlock Item 6 System 3R-202 MiniBlock Item 7+8 System 3R-204 Height Adjustment Adapter WEDM Item 9 System 3R-218/30S Holder Sets Item 11 System 3R-602.21 Manual Chuck Macro Item 12 System 3R-294.3 Vise Iodpfx Asxqn Ubebgeia Item 15 System 3R-293.3 SuperVice Item 17 System 3R-200-4J-2 470mm System 3R-200-4J-2 470mm System 3R-200-4J-2 330mm System 3R-200-4J-2 138mm Item 18 System 3R-239–545 0006-V01 System 3R-239–495 Shipping and inspection possible!

Condition: excellent (used), functionality: fully functional, We are offering various used 3R systems here. The systems are in very good condition and fully functional. Inspection by appointment possible. Item 1 System 3R-203 Rotary Element WEDM 360° Item 2 System 3R-201J Adapter WEDM 90° Item 3 System 3R-201J Adapter WEDM 90° Item 4 System 3R-201J Adapter WEDM 90° Item 5 System 3R-202 MiniBlock Item 6 System 3R-202 MiniBlock Item 7+8 System 3R-204 Height Adjustment Adapter WEDM Item 9 System 3R-218/30S Holder Sets Item 11 System 3R-602.21 Manual Chuck Macro Item 12 System 3R-294.3 Vise Item 15 System 3R-293.3 SuperVice Item 17 System 3R-200-4J-2 470mm System 3R-200-4J-2 470mm System 3R-200-4J-2 330mm System 3R-200-4J-2 138mm Ijdpfxjyzqmde Abgsia Item 18 System 3R-239–545 0006-V01 System 3R-239–495 Shipping and inspection possible!

Year of construction: 2026, condition: like new (used), Drip tray MRA system type WO 1000-001 Length 1450 x 1450 Height 530 Ijdpoyzmmmjfx Abgoia

Condition: new, table length 1000 mm table width 1000 mm table height 100 mm bore 16 mm weight 200 kg Special offer: Exhibition use – slight scratches on the surface Features: Iisdpeyzty Hefx Abgea - Surface holes in a 50x50 mm grid - Holes in the side panels in a diagonal grid - 4 feet – standard configuration 750 mm - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 – 13 mm - Side panel made of high-quality steel S355J2+N + plasma nitriding - Hole Ø 16 mm - Corners, edges and holes rounded - Side panel height 100 mm - Includes scale markings on the surface - Construction reinforced with ribs - Grid lines enable precise set-ups

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: Iijdpfoy Aagisx Abgoa ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: used, axle configuration: 1 axle, first registration: 01/2016, loading space length: 11,100 mm, loading space width: 2,480 mm, loading space height: 2,660 mm, total length: 11,600 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 275/70R22,5, color: other, Year of construction: 2016, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Tail lift = Notes = Number of axles: 1, Own weight: 6,090 kg, Gross weight: 22,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body year: 2016, Axle type: SAF, Tail lift, Tail lift type: Rear flap, Tail lift capacity: 2,500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel, Tail lift dimensions: 200x252, Battery for ramp. = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Tyre size: 275/70R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Twin tyres; Steering; Tyre tread left inner: 8 mm; Tyre tread left outer: 4 mm; Tyre tread right inner: 3 mm; Tyre tread right outer: 4 mm Weights Empty weight: 6,090 kg Payload: 15,910 kg Gross Vehicle Weight: 22,000 kg Functional Tail lift: Dhollandia, rear flap, 2,500 kg Environment Emission class: Euro 0 Iiodeyc D E Iopfx Abgja Condition General condition: Average Technical condition: Average Visual condition: Average Damages: None = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Good prices • Reliable business practices • Multilingual staff • We understand our customers • Assistance with import and transport • (Export) registration plates are arranged quickly • Expert technical services • The security of “recognizable quality” • And much more... Please visit our website for special offers and our complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask us directly about our European warranty packages.