Telehandler / Telescope Forklift

Manitou MHT 10130 (Rental only)

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Operating hours: 42 000 Year of construction: 2014 Complete system in container (12 x 4.5 m) Hjdpfxevgbdrj Af Djpa with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Ready for immediate use! Further details on request

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 164 h, working width: 3,100 mm, operating speed: 8 mm/s, reverse speed: 75 mm/s, overall weight: 10,500 kg, total length: 4,500 mm, total width: 1,700 mm, total height: 2,500 mm, input voltage: 380 V, pressing force: 200 t, power of the servo motor: 15 W, With manual, part list and all available technical documents. Hpjdpfevm Elajx Af Dsa

Condition: new, Year of construction: 2018, functionality: fully functional, Hello we offer here a brand new climate outdoor unit from Toshiba. The device was built in 2018 but was never installed. The device has 45kW. Hjdpfx Aelc Eukjf Depa

Condition: used, mileage: 67,400 km, lifting height: 59,100 mm, Year of construction: 2018, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Hsdpetr Nuqefx Af Dopa Functional Lifting capacity: 8.000 kg Identification Serial number: 076646 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Upper engine: Perkins Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x4 Additional information Please contact PFEIFER GROUP for more information

Condition: new, back gauge: 750 mm, - Capacity 1050 x 6 mm - NC electric back gauge - Foot switch - Rear photocell protection - Support arms Hpodpfxogg N Hbo Af Dja - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg - 400V

Condition: excellent (used), Year of construction: 1996, Technical data: maximum cutting width: 3100 mm maximum cutting performance for steel St40: 15.0 mm motorized adjustable parallel stop: 1500 mm Hodsummw Tepfx Af Djpa motorized adjustable cutting gap adjustment cutting angle adjustment working height: 860 mm motor power: 22 kW side protective grille with light barrier on the back dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm weight: approx. 13.5 tons We can only show a small part of our current range of used machines here. Please also visit our homepage! The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear and tear are in keeping with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available Hpedpfx Afjnh R Eko Dsa - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Year of construction: 1993, condition: used, Chamfer lenght: 3.000 mm Stands passage: 2.750 mm Max. pressure: 180 t Control: CYBELEC DNC 70 Stroke: 220 mm Total power: 15 kW Weight of the machine: 11.000 kg Hpsdpfx Afokh Niqo Dja

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Hpsdpouwlzyjfx Af Dja Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Elgo achteraanslag Handmatige messpelingafstelling Hsdpfx Afsv Taias Dopa Inloopbeveiliging aan de achterzijde Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x