Coordinate measuring machine

Mitutoyo QVT1-L2022IL-D

Year of construction: 2023, operating hours: 4,371 h, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, spindle motor power: 11,500 W, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details. • Operating hours: approx. 4,371 h • Working range: • Tool diameter: Ø3–290 mm (optional up to Ø400 mm, depending on configuration) • Maximum tool length: 270 mm (optional up to 350 mm, depending on configuration) • Maximum tool weight: 50 kg • Axes: • Number of CNC axes: 5 • Linear axis speed: up to 15 m/min • Spindle: • Max grinding wheel diameter: Ø200 mm • Interface: HSK • Belt-driven, double-ended spindle • Grinding / Eroding: • Grinding and EDM in one setup • For carbide, HSS, PCD, CBN tools • Configurable for up to 3 electrodes and 3 grinding wheels, or alternatively up to 6 grinding wheels • Control / Machine design: • WALTER / UNITED GRINDING CNC control • Enclosed working area with automatic protective door • Installed machine options/features: • Upper table • Glass scales • Reinforced A-axis, up to 750 rpm • Preparation for automatic calibration/probe • Grinding wheel measuring probe • Automatic fire suppression system with leak detection Podpfxjzxg Tfe Ab Tjgu • TS-Remote Ready • Keyboard support • Oil leak sensor • Connection for external filtration system Additional equipment • Automatic loading/manipulator system for shank tools (automatic tool loader/manipulator) • Process cooling system • Coolant/dielectric filtration and circulation system • Coolant/dielectric system • Tool holders • Flanges/adapters • Grinding wheel/electrode accessories • Automation/handling: • TOP loader • 12 pallets • Filtration/cooling/extraction: • Oil mist extraction system • Extraction silencer • Oil cooling unit • Filtration system with tank and pump • Workholding/tooling: • Collets 6–16 mm • Collets 16–32 mm • 351 ES collets: 6, 8, 10, 12, 16 mm • 4 x 351 ES collet sets • Collets: 6, 8, 10, 12, 14, 16, 18, 20, 25 mm • Automatic holder 6–16 mm • Automatic E386 holder, 16–27 mm • Manual hydraulic holder, diameter 32 mm • ISO 50 socket • ISO 50 arbor • 2 x 50 mm HSK electrode holders • 4 x 45 mm HSK grinding wheel holders • Grinding wheel holder for dressing • Grinding wheel set measuring adapter • HSK calibration disc • Calibration roller • Measuring: • Heliset Plus measuring device • Software/options/packages: • Tool Studio for PC • Tool Studio Step Tools • 45-degree P-System sharpening option • P36 wood drill tooling package • Drill package • Hoger P58 package • Consumables: • 4 x 208 l dielectric fluid

Condition: ready for operation (used), Year of construction: 2004, total height: 2,730 mm, product length (max.): 1,470 mm, CMM machine manufactured in 2004. This Mitutoyo Crysta-Apex C 776 features a measuring range of 700 mm in both X and Y axes, and 600 mm in Z. It includes advanced components such as a motorized Renishaw probe head and automatic temperature compensation. If you are looking to get high-quality measurement capabilities, consider the Mitutoyo Crysta-Apex C 776 machine we have for sale. Contact us for further details. • Accuracy: MPEE = 1.9 µm + 4·L/1000 (with Renishaw TP200 probe) • Temperature compensation: Automatic temperature compensation (temperature sensor) • Controller: UC200H (including scanning card) Additional equipment Podpfxjyhgbps Ab Tsgu • Probe head: Motorised Renishaw PH10M (7.5°), PHC10-3 head controller, PI200 interface • Probing system: Renishaw TP200 with 3× TP200 STD force modules • Probe changer: Renishaw SCR200 with 6 parking positions • Stylus set: Basic stylus set (5 pcs) • Calibration equipment: Ceramic calibration sphere Ø 20 mm • Software: MCOSMOS v4.3 with CAD option; active modules: GEOPAK, CAT1000S, IGES, STEP, STATPAK, Scanning Probes, Laser Probe Support, Export Status Information • Computer system: Industrial PC with Windows 10 operating system

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Pgedpfx Abjh Hbpws Tju Available: 14 pieces

Year of construction: 2020, condition: used, More information will be provided upon request. Pjdpfx Abszwnrmo Togu

Condition: used, Year of construction: 2013, max. wheel diameter 260 mm gear width 320 mm Pgedpox R U Hgefx Ab Tsu max. module 4,5 min. module 0,5 Control SIN 840D max.helical angle +/- 45 ° total power requirement 68 kW weight of the machine ca. 15,50 t dimensions of the machine ca. 3,25 x 3,25 x 3,30 m Fire extinguishing system Siemens Sinorix TM Knoll Filtering system VL1500/8000 year 2017 Wekal loading cell

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Pgsdpfxjuz If No Ab Tou Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. Due to its modular design, the process technology can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Pgjdpfx Astuk H Hob Teu Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Weight (incl. control system): approx. 825 kg

Condition: used, Year of construction: 2006, Measurement range width/length/height: 1600/1800/1000 mm Dimensions width/length/height: 2450/2940/3800 mm Maximum workpiece weight: 3500 kg Measurement machine weight: 8500 kg Creep feed: 0 - 5 mm/s Setup operation: 0 - 70 mm/s Series measurement operation Axis: max. 300 mm/s Vector: max. 425 mm/s Software version: Calybso 2023/ Service Pack 2 – Version 7.6.08 Pedpfxezn Iucs Ab Tsgu Various measuring probes Measuring head

Condition: reconditioned (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, measuring range X-axis: 200 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, feed length X-axis: 200 mm, feed length Y-axis: 200 mm, feed length Z-axis: 200 mm, Equipment: documentation/manual, lighting, type plate available, Refurbished Multisensor Measuring Device Mahr MS 222 - LIKE NEW Including certification of acceptance prior to delivery Factory-refurbished premium multisensor measurement center with warranty and guarantee, rebuilt in 2024. INCLUDES the latest software update, 18 months of free software update service, free lifetime software hotline, and user support. Delivery Options: Factory service or worldwide shipping via freight forwarder. Demonstrations: Online or on-site demos available with customer-specific parts. Application consulting provided by accredited Profitech measurement laboratories during project planning. Comprehensive Service Package: – Delivery, setup, commissioning, accuracy verification according to standards, certification, and extensive acceptance documentation. – Tailored training programs available, including online courses. Flexible Payment Options: Rental, lease-purchase, or financing directly through Profitech—no financial institution required. The measuring device can be configured to meet individual customer needs. Specifications: Measurement Range: 200 x 200 x 200 mm Load Capacity: Glass plate 10 kg Scale Resolution: 0.1 μm Maximum Traverse Speed: 150 mm/s Dimensions: 900 x 750 x 950 mm Machine Weight: 170 kg Control Cabinet Weight: 90 kg Length Measurement Accuracy: According to VDI/VDE 2617-6 E2 (X,Y) = (3.2 + L/125) μm Pgedpfx Aoglp Nqeb Tju Probing System with Optional Probe Package: Renishaw TP20 probing system installed Retrofit: Updated in 2025 Includes PC and Software Illustrative Image by the Manufacturer

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 68910, workpiece weight (max.): 5,100 kg, wheel width: 180 mm, grinding wheel diameter: 330 mm, helix angle: 45 °, rotational speed (min.): 1,100 rpm, rotational speed (max.): 1,900 rpm, type of input current: AC, wheel diameter: 10 mm, gear diameter: 330 mm, overall weight: 5,100 kg, total height: 2,300 mm, total length: 6,000 mm, total width: 4,500 mm, Wheel diameter - max. 10 - 330 mm Wheel width 180 mm Module - max. 7 Module - min. 0.5 Clamping length 420 mm Number of teeth 10 - 600 Pgjdpfx Asykrmceb Tju Helix angle - max. +/- 45° Speed 1100 - 1900 rpm Grinding wheel diameter 280 - 350 mm Grinding wheel width 84 - 104 mm Machine weight approx. 5.1 t Required space approx. 4.5 x 6.0 x 2.3 m Grinding oil filtration unit Reishauer AF