Edge polisher for natural stone

Montresor Lola 6.4

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL Bedpfx Absgvqz Ie Uowk 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Year of construction: 2025, condition: new, Standard version with column Motorised height adjustment 700 mm Articulated arm length 2x 1.100 mm Bwodpfx Aogn Tzljb Usk Height adjustment of grinding spindle 130 mm Grinding motor 5,5 kW including the following options: + speed control, spindle speed approx. 250 - 1.000 min-1 + pneumatic grinding pressure support + bellows cover for column and trapezoidal spindle + Incl. foundation screws and mounting template Grinding tools optionally available Request more information

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 251 h, load capacity: 8,000 kg, lifting height: 4,490 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 2,400 mm, empty load weight: 16,850 kg, total length: 2,640 mm, drive type: Elektro, construction width: 2,140 mm, Electric 4-wheel forklift Load center: 900 Mast type: Triplex Condition: As good as new Technical condition: very good Front tires type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Battery Volt: 80V Battery year of construction: 2020 Sideshift, Fork positioner, 3rd valve, 4th valve, heating, STVZO, full cab, full free lift, CE certificate, Bwjdpfxjxxdy Ns Ab Uek

Condition: excellent (used), Year of construction: 2018, operating hours: 3,200 h, functionality: fully functional, repeat accuracy: 0.01 mm, travel distance X-axis: 3,002 mm, travel distance Y-axis: 1,502 mm, travel distance Z-axis: 300 mm, positioning accuracy: 0.02 mm, workpiece weight (max.): 4,500 kg, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 300 mm, operating pressure: 4,000 bar, cutting speed: 8,000 mm/min, power of the servo motor: 2,000 W, table load: 4,500 kg, compressed air connection: 6 bar, product height (max.): 300 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, Machine: STM 1530 PremiumCut 3D 12° angle compensation Pump: BFT ECOTRON® 40.37 (37 kW, 4000 bar) Great condition, fully functional, purchased new in October 2018. Machine is located in EU, Zagreb, Croatia, possible cutting test at our place. Only 3200 pump operating hours, automatic pressure control, automatic abrasive control, cutting angle compensation, possible upgrade with turning machine and drilling unit for piercing sensitive materials, durable machine frame (aluminium alloy + stainless steel), equipped with high quality parts. 1. Waterjet cutting system STM 1530 PremiumCut 3D 12° angle compensation Robust CNC milled absolutely rust-proof construction in aluminium and stainless steel High-precision robust rack and pinion drive with helically toothed racks Premium guide X & Y axis with Bosch Rexroth™ with high-precision ball-bearing carriage and stainless steel balls Threefold dirt scraper package Working area accessible from 3 sides for simplified loading and unloading Underwater cutting is possible CNC milled workpiece holder with heavy-duty frame for parts with weights of up to 1,000 kg/m² The scope of supply contains the required lubricants and special tools for servicing and maintenance 1.1 CNC operating range X axis: ..... 1,502 mm Y axis: ..... 3,002 mm (bridge) Z axis clearance: ..... 300 mm A axis: ..... 12 degrees B axis: ..... +/- ∞ 1.2 Precision and feed Positioning precision: ..... ± 0.02 mm (per metre at 20°C) Repeatable precision: ..... ± 0.01 mm (per metre at 20°C) Max. feed: ..... 60 m/min A axis feed: ..... 360 deg/s B axis feed: ..... 360 deg/s 1.3 Dimensions & weight Length: ..... approx. 3,750 mm (incl. high-pressure tubing) Width: ..... approx. 4,700 mm Height: ..... approx. 3,400 mm (incl. high-pressure tubing) Weight: ..... 1,500 kg (without water) 2. High pressure pump ECOTRON® 40.37 420 MPa max. design pressure 400 MPa max. permissible operating pressure 380 MPa max. continuous operating pressure 3.8 l/min max. flow rate 37 kW driving power 2.1 Technical details Drive hydraulics with axial piston pump and hydraulic pressure/flow rate control Gear pump for separate cooler/filter circuit Pressure intensifier with drive cylinder and high pressure cylinder 2.49 litre pulsation damper according to Pressure Equipment Directive 97/23/EC Connection for external emergency stop circuit Electrical and electronic components fitted in control cabinet Hydraulic and high pressure components mounted on a common base frame Compact design, all tubing fitted, all pipework fitted and wired 2.2 Options Included Bjdpfsvla U Tjx Ab Uewk Automatic pressure adjustment from 50 - 400 MPa Cooling via oil/water heat exchanger Pressure relief valve with pneumatic control Check valve on the feed water inlet Double filter element for pre-filtration of the feed water Sound insulation casing Special tools for fitting the high pressure seals incl. torque wrench Water stop check valve Included: machine, high pressure pump, control unit (PC in electronic box), abrasive, spare parts

Condition: good (used), Year of construction: 2014, Has been serviced regularly. Technical values: 81.2 L/s, 13 bar. Connection values: 400V / 50HZ, 26kW Width: 1260 mm Bedpfx Absvmpt Ue Uewk Depth: 860 mm Height: 1500 mm Weight: 520 kg

Condition: good (used), power: 4 kW (5.44 HP), spindle mount: MK 5, throat depth: 1,600 mm, drilling capacity: 50 mm, quill stroke: 310 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 28 rpm, Armlength: 1600 mm Bedpfjtt I T Ijx Ab Uowk Drillingcapacity steel: Ø 50 mm Tappingcapacity steel: M50 x 1,5 mm Spindle nose: MK 5 Spindle speeds: 28 - 2500 Rpm Spindle feed: 0,05 - 2 mm/rev. Spindle stroke: 310 mm Spindle -> Floorplate: 1500 mm max Drilling table: 1000 x 750 mm Size floorplate: 1820 x 986 mm Featured with: - Cooling unit - User manuals Spindle motor: 4 kW Country of origin: Czech Republic Machine weight: 4500 kg Machine LxWxH: 3250 x 1120 x 3400 mm

Condition: used, Year of construction: 2015, Technical details: lifting capacity: 0,8 t span width: 4375 mm Arm length: 4375 bis Kranhaken mm height lower edge cantilever arm: 3660 mm cantilever arm length from center column: 4650 mm lifting height max. hook position: 3300 mm column diameter: 410 mm Bwsdpfxsu Nvmqs Ab Uek rotation: momentan ca. 100° begrenzt ° total power requirement: 1,8 kW The pillar-mounted slewing jib crane consists of the following main groups: Boom Hoist: Vetter chain hoist type SICH6BF, lifting height 2000mm, hook Ø 43mm with rope safety device; load chain type 7 x 20 double chain Support column H: 4000mm with flange Ø 610mm Crane control via pendant control Beam Manual operation (slewing) Chain hoist on beam *

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Manufacturer: CMS Bwsdpfxoydpmgo Ab Uek Model: Smartline 2040 Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Abrasive feeding system: 270 kg hopper CNC control: OSA Open Machine condition: Very good / like new This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles 3 upper bevelling spindles Bwedpfxjyrr Uvj Ab Usk 3 lower bevelling spindles automatic lubrication 2 roller tables of 2mt. each Very good condition

Condition: used, Year of construction: 2020, functionality: fully functional, operating hours: 2,500 h, THIBAUT TC 625 – 5‑Axis CNC Bridge Saw (Used Machine) Description For sale is a THIBAUT TC 625 5-axis CNC bridge saw in very well-maintained condition. The machine is ideal for processing natural stone, quartz composite, ceramics, and similar materials, and is especially suited for kitchen countertop and interior fitting production. Technical Data Manufacturer: THIBAUT SAS (France) Model: TC 625 Machine Type: 5-axis CNC bridge saw Year of Commissioning: approx. 2020 Machine No.: 04.19 Voltage: 400 V / 50 Hz Spindle Power: approx. 13.2 kW Spindle Speed: 0 – 6,000 rpm Blade Diameter: 300 – 650 mm X-Axis Travel: approx. 3,970 mm Y-Axis Travel: approx. 2,300 mm Z-Axis Travel: approx. 500 mm Max. Material Thickness: approx. 200 mm Condition Machine powered – demonstration possible by arrangement Spindle hours: approx. 2,500 h Excellent technical and optical condition Regularly serviced Ready for immediate use Features 5-axis CNC control Tilting worktable 3,600 × 2,000 mm Table adjustment from 0° to 85° Additional unloading table 3,600 × 400 mm Digital camera for slab imaging Tool and material probing system Vacuum lifter up to 500 kg ACS plunge cutting system Tool water cooling Software T'CUT basic software Vacuum lifter manipulation module Vein matching module Contouring and trimming module CAD/CAM software eT'CAM Application Areas Kitchen countertops Bjdpfx Abjyuvhfj Uowk Bathrooms and washbasins Staircases Processing of natural stone and quartz composite Ceramics and similar materials Sales Information Price: on request Location: Germany Availability: by arrangement Inspection / Test Run: Machine is powered – test possible