Adast maxima for sale
Identified location: Ashburn (US) (Edit)
|
1
impressions - Mio.
max. printing speed sheets 10000 /h
max. paper size 38 x 52 cm
Beopy0lnph
serial no. 8212074 more
|
|
7
Adast Grafopress GPE typographic machine
Very good condition, ready for production, after review.
The machine has all safeguards.
Equipped with printing rollers, two mounting frames.
The device is used for die cutting, printing, creasing, numbering, etc.
Bfu8qtc8i7 more
|
|
5
Wiefelstede, Germany
dealership location
6377 km
used
-Pressure: maximum 30 bar
-Predos is a special high pressure riser made of stainless steel with a burst pressure of 70 bar
-Can when pressing free clogged discharge pressures of up to 30 bar are required
Vqlsgm
-High pressure level raw
-with lid lifter type Hercules
-in the case
Dimensions 1200/360/H200 mm
Weight 16 kg more
|
|
6
Dortmund, Germany
dealership location
6417 km
2014
used
[...]: 5635\\\\\ xc. : 1560 mmmType : mast height : mast width : mast type : mast height : mast height : mast height : mast height : mast height : mast height : mast height : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast : mast Valve* Roof cover ** Attachments:*** Sideshift\\**Other equipment Information:**\\ Demonstration equipmentWe are happy to offer you the right transport solution.250 - 300 more forklifts, ... more
|
|
1
impressions - Mio.
max. printing speed sheets 10000 /h
max. paper size 30,7 x 44,0 cm
Beop8zc792
serial no. more
|
|
|
|
2
L. Z.-Lathe make EMCO type Maximat V 13Fabr. # D15C8C8006, year 1989Technical data:centre height165 mmpoint width1000 mmturning diameter over bed330 mmturning diameter over cross slide190 mmbed width210 mmspindle bore36 mmspindle speeds50-2000 rpm.28 Longitudinal feeds0.045 - 0.8 mm/U28 Plan feeds0.225 - 0.4 mm/U28 Metric thread pitches0.4 - 7 mm24 inch thread4 - 56 Gg/1"28 Module thread0.2 - 3.5 M32 DP thread8 - 112 DP drive power2.2 kWDimensions L x W x H1595 x 835 x 1300 mmWeight approx.510 k... more
|
|
4
Tito (PZ), Italy
7552 km
2012
excellent (used)
Obscure Maxima 50 X 70 with 7 stations.
The machine is equipped with barcode readers and software for processing numbered products.
At the exit there is a jogger for collecting the sheets.
In the last two years the machine has worked a few hours and generally has worked little since we bought it.
Jfmdk7y
The machine is working and can be seen and tested until February 2020 more
|
|
10
Steinheim, Germany
6715 km
excellent (used)
- Maximator high-pressure pump
- for mechanical engineering, oil and gas industry
- chemical and pharmaceutical industry
Mupq0c
- Mining and construction industry
- Aerospace
- with metall hydraulic hoses Typ 5/6 Fa. RK Kutting more
|
|
9
Lifting table without hydraulic unit
Used goods, good condition, see pictures
Length 124 cm
Width 136 cm
Maximum height 100 cm
Besbapudxg
Minimum height 10 cm
A cylinder a little leaking
Roller conveyor driven
Negotiation price: € 900,-- net from stock
Goods are in stock.
Transport and assembly possible on request.
Visit possible at any time by appointment.
More information on request.
Constantly over 5000 lfm pallet racks
in stock by numerous manufacturers.
(changes and errors in the ... more
|
|
4
Frame Adast GP
Year - - Serial-No. -
-Available Immediately -
Be9lovtlsd
-Can be inspect-
-On stock- more
|
|
1
colour units 1
max. printing speed sheets - /h
max. paper size 26 x 38 cm
serial no. 61520
Dimensions (L/W/H) 165x110x132 cm
Nlpyr
weight - pallet system 1600 kg more
|
|
5
Tatabánya, Hungary
7317 km
2001
good condition (used)
serial Nr. 753 026
year of built 2001
Weight 9000 kg
clamping force 2000 kN
voltage 230
motor outputs power 68,1 kW
minimum moulding size in mm 300 mm
mould opening size 450 mm (750 mm)
ejection stroke 180 mm
tie bar distance 560 x 560 mm
maximum produce parts with a shot size 679 ccm / 584 gramm
oil to fill in 485 l
hours of Production 56 011
working Condition very good
location of Machine in Europe Hungary - 2800 Tatabánya
Bfqe7tdovr more
|
|
2
Lifting table
Hydraulic
maximum lifting height 1300 mm
minimum lifting height 770 mm
Table area 1050 x 580 mm
2iwv8wak
Ges. Length 1200 mm
Ges. Width. 840 mm more
|
|
14
X: 1200 (1140) mm
Y: (528) 580 mm
Z: 600 (575) mm
Table size: 1575 x 425 mm
Workpiece weight: 800 kg
Clamping surface: 425 x 1575 mm
Spindle retainer: ISO 40
Spindle drive: 5.5 kW
Speed range: 50-3650 RPM
Digital display: 3 axes
Machine lamp
Coolant system
Total capacity: 8,5 kW
Machine weight: 3500 kg
Dimensions (W x D x H): 1.9 x 2.4 x 2.15 m
Spindle adjustable, infinitely variable feed
Accessories: 2 vices, 9 tool holder/tools
Nmf39 more
|
|
10
Lift H 1,2 m
Used, good condition, see pictures
Manufacturer Demag
Length 136 cm
Width 98 cm
Maximum height 120 cm
Lifting capacity 500 kg
Trial price: € 1.200 net ex warehouse
Product is in stock.
Transport and mounting possible on request.
Visit any time after agreement possible.
Further details on request.
Constantly over 5000 m pallet racks
by numerous manufacturers in stock.
(Changes and errors in the technical data, information
and prices and subject to prior sale! See our terms ... more
|
|
9
Adast GPE
Year 1986 - Serial-No. 63768
Jfcp3b9
Size min.: 40 x 70mm - max. 260 x 380mm
Speed min.: 2.200 sph - max. 5.500 sph
Standard chase: 260 x 340mm
Skeleton chase: 260 x 350mm
Packing thickness: .04" = 1mm
-Available Immediately -
-Can be inspect-
-On stock - Can be test- more
|
|
1
impressions - Mio.
max. printing speed sheets 11000 /h
Beop8pryl0
max. paper size 3,81 x 5,20 cm
serial no. 52510098 more
|
|
10
Adamatic dampening with MGE circulation
CPC Adacontrol
Jvdggi
Automatic inker Washer
Low Pile Delivery
Cocking
Grafix Junior powdering more
|
|
5
Burgoberbach, Germany
dealership location
6721 km
1997
good (used)
The equipment of a training workshop or similar are three EMCO Maximat Super 11 CD for sale. The lathes are ready and have no technical defects. Wide range of accessories such as coolant system, Stehlynette, multi fix holder, Spangzangenaufnahme would be available if needed.
The price refers to the acceptance of a lathe, a package price is possible for the purchase of all lathes. The selected images are an example of a lathe
Machine number: Year of construction:
C6R J2 007 1996
C6R K5 022 1997... more
|
|
11
Lifting table H 1.25 m
Used goods, good condition , see pictures
Manufacturer Demag
Length 158 cm
Width 106 cm
Maximum height 125 cm
Lifting capacity 500 kg
Negotiation price: € 1,200,-- net from stock
Goods are in stock.
Transport and assembly possible on request.
Visit possible at any time by appointment.
More information on request.
Constantly over 5000 lfm pallet racks
in stock by numerous manufacturers.
(changes and errors in the technical data, information
Besbscjpvb
prices and ... more
|
|
2
LEADERMAC moulder, type Maximac 930
Manufacture year 11-2007
Machine specifications:
- Planing width 20 – 300 mm
- Planing height 10 – 150 mm
- Cardan driven feeding system, motor 22 kW
- Feed speed 6 - 80 m/min
Spindle lay-out:
1. Horizontal spindle bottom, motor 18.5 kW
2. Horizontal spindle top, motor 22 kW
3. Vertical spindle right, motor 15 kW
4. Vertical spindle left, motor 18.5 kW
5. Vertical spindle right, motor 15 kW
6. Vertical spindle left, motor 18.5 kW (universal)
7. Horizont... more
|
|
1
colour units 1
max. printing speed sheets - /h
max. paper size 26 x 38 cm
Clawjhpx
serial no. 44.980
Dimensions (L/W/H) 165 x 110 x 132 cm
weight - pallet system 1600 kg more
|
|
14
Steenwijk, Netherlands
6271 km
1984
excellent (used)
We offer 11 Super a very good turning machine of EMCO Maximat brand, with Sino digital system.
The machine normally used and is very well maintained.
The paint is original and has normal use.
The bed has no damage.
This lathe comes from a private workshop.
We have provided a complete technical service this machine. Run the machine very carefully, beautiful and quiet!
Flying Rotary test on 100 mm 0.01 mm.
Is dar a foot brake mounted.
The electric spit switch is supplied and must be connected by... more
|
|
14
ARNTZ carbide tipped circular saw blades from operating resolution
different types of
currently available:
3 piece
Type: Maxima-plus
Number of teeth Z = 120
Diameter 1150mm
Bore 100 mm
Cutting width 5 mm
Condition: unused / see Figure 2-6
Unit price:
500 EUR net plus VAT
Bjmrb2im
_____
5 piece
Type: unknown
Number of teeth Z = 200
Diameter 1000mm
Bore 60 mm
Cutting width 6 mm
Condition: unused / see Figure 7-10
Unit price:
EUR 400 net plus VAT
_____
4 piece
Type: Maxima 3000
Number of teeth... more
|
|
5
It is a used Eberhardt spiral mixer typeMaximat 250 with 2 x bowls (extendible) for sale. The spiral mixer is dough for up to 250 kg. The machine has a stainless steel spiral and a digital control over the the kneading time of two speeds can be adjusted (automatic return). The machine has a dust cover. The machine head of the machine can be automatically and be lowered. The tank car is automatically locked. The spiral mixer is fully functional, runs quietly and is working perfectly. The machine ... more
|
|
10
With milling head and lots of accessories
Swing over bed 254mm
Nhvpn
Distance between centers 650mm
Spindle bore 16mm
Spindle speeds 100-1550 rpm
MARCELS MASCHINEN CH more
|
|
6
SKU: 2027
Manufacturer: Eberhardt Backtechnik GmbH
Serial number: 40-1171301
Batch sizes:
in dough up to: 40 kg
Built: 1998
Zq0rp0e0
Technical data:
Operating voltage: 400 V
Frequency: 50 Hz
9 A
3.0 kW
GS seal of approval
- Digital control with new display
- clear keyboard;
- Kneading or mixing time digitally adjustable;
- Boiler rotation direction digitally adjustable;
- ongoing dough temperature monitoring;
- Stainless steel boiler and kneading arm
- Power connection system new
... more
|
|
6
Borken/Burlo, Germany
dealership location
6352 km
used
WEDECO Aquada Maxima UV disinfection system - micro-computer
Facilities:
Effective microbiological protection
Go7lilg
Bio-dosimetrisch tested
Compact display unit
Emitter cable with function control
Security spotlights connection
Micro-computer monitoring
Fault indicator optical and acoustic
Digital radiator change indicator using day counter
Reset button Reset of alarms and day counter
Connection for optional, automatic safety shut-off valve
UV monitoring system
Digital UV intensity display
W... more
|
|
5
Trenčín, Slovakia
7215 km
2007
excellent (used)
Machine is still in the production. See demonstration video.
Bffksneghm more
|
|
3
Motor speed: 1400/2800rpm, centering tip length: 650mm, centering tip height: 127mm, length: 1200mm, width: 500mm, height: 1200mm.
Muqkp more
|
|
1
Two pot also individually sellable with lots of accessories BJ. 1978 / 80 in the Techn. very good condition. Until recently, still numbered, perforated and printed.
Beje3ddizz more
|
|
5
Berlin, Germany
dealership location
6738 km
used
• Top length: 650 mm
• Tip height: 140 mm
• Turning diameter over bed: 290 mm
• Swing over cross slide: 135 mm
• Bed width: 155 mm
• Travel longitudinal slide: 590 mm
Mqwx2
: Cross slide travel 135 mm
• Upper slide travel: 100 mm
including four jaw Chuck and Multifix.
The photos reflect the current state.
A demonstration on the spot is possible. more
|
|
2
KREFELD, Germany
dealership location
6365 km
1988
used
|
|
5
Machine is ready for use and was until the end for punching and numbering used.
Including several Chase and accessories
Cuovnpl more
|
|
5
We have for sale Adast Dominant 515:
Year: 1991
Colours: 1
Size: 360 x 520 mm
Water dampening
No damages on cylinders
Condition: Very good, working
Y3lgidvhn
Location: Poland
Available immediately more
|
|
3
One used paper bag making machine Fischer & Krecke.
Bemgvuopf8
Machine is in TOP condition including new anilox rolers , new rubber rollers, new gears. Machine can be seen
in production. more
|
|
6
1612, Bulgaria
dealership location
7938 km
1991
good condition (used)
Sheet collator
9 stations
Dwiji3
Size 50x70 more
|
|
8
Huron EX-C 5-Achs Maschine Bearbeitungscenter 5-Axis machine center vertical
Typ: EX-C 20
Steuerung/Control Unit: Siemens 840D
Model: 1998
Spindel erneuert/Spindle renewed in 2018
Verschiebungswege
X Längsverschiebung 1600mm
Y Querverschiebung 700mm
Z Senkrechtverschiebung 800mm
Spindel
Einsteckkegel HSK63-A
Werkzeugspannkraft 18.000N
Maximale Leistung 25kW
Spindelgeschwindigkeit 100-14.000 kW
Maximaler Moment 256mN
Kenndrehzahl 1.000Upm
Kopf
Typ C Arbeitsachse
Achse-B +/-100°
Meßinkreme... more
|
|
|
