Used Asphalt Technology for sale (24,118)

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm Chsdpfxexn Rt Ue Aaqsd • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Stand The unit is in full working condition and is ready for immediate use Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Comprehensive IQ/OQ documentation for validation. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: Codpfxoxhfpkj Aaqshd IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: Csdpfxsua D Als Aaqehd weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Technical Data Summary (No Marketing Spiel): This is a used automatic in-line Solder Paste Printer, Model P4034 from Shenzhen ETA Technology Co., Ltd, manufactured in 2018. The machine is in excellent functional condition. Key Performance Parameters: ● Repeat positioning accuracy: ±0.01mm. Chsdexm S N Uopfx Aaqed ● Printing accuracy: ±0.025mm. ● Max PCB size: 400×340mm. ● Min PCB size: 50×50mm. ● Max Stencil Frame size: 737×737mm. ● Cycle time (excluding print/clean):

Year of construction: 2024, condition: new, Drum for Doppstadt screener SM 518 and SM 620 on stock. CHECK AVAILABLE PERFORATIONS. We manufacture and provide drums for mobile and stationary screeners, for : - Doppstadt SM 414 - Doppstadt SM 518 - Doppstadt SM 618 Chjdpfx Aajfi Tqbsqod - Doppstadt SM 620 - Doppstadt SM 718 - Doppstadt SM 720 - Doppstadt SM 725 also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey... Bespoke maded drums are our specjality.. In case of any question, please contact me by mobile or e-mail.

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 Cjdpfx Ajp S Tlhsaqehd The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: AD082, Offered is a microwave unit from Fricke und Mallah Microwave Technology GmbH, manufactured in 2010. The machine is currently not in use. It is up to date with the latest safety standards and ready for operation. Codpexcnkaofx Aaqohd An inspection of the machine is possible upon request and by appointment. We are available for any further questions you may have.

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 6,500 mm, type of input current: three-phase, total width: 1,629 mm, total height: 2,525 mm, total length: 10,500 mm, table length: 6,500 mm, overall weight: 3,500 kg, pipe diameter (max.): 220 mm, power: 15 kW (20.39 HP), laser power: 6,000 W, warranty duration: 24 months, Equipment: cooling unit, safety light barrier, PFEIFER technology skyTUBE Pro 6500 X3 – Profile & Tube Laser Center 6500 x 15 – 160 mm Format skytube-pro-6500×3 Profile and Tube Laser Fiber Laser Metal Cutting – fast material change with up to 6kW, delivering effective performance for your production, is the smart and efficient tube laser processing solution. Capable of laser cutting round tubes, square tubes, rectangular tubes, open profiles, and special profiles, this laser machine ensures maximum productivity during production changeovers. Task: Fiber laser up to 6kW for a wide range of metalworking applications! Unrivaled Laser Cutting Performance High axis speeds and accelerations, combined with a robust mechanical structure, ensure outstanding cutting performance and precision. Csdpfxjrh Iw Ts Aaqjhd The tube and profile laser processing machine for production offers a compact footprint – simply smart! Ingenious solutions, 100% made in Saxony! Tubes and profiles from 15 x 15 to 160 x 160 mm – 3D cutting with efficient fiber laser technology. The semi-automatic 6-position profile-tube loading chain system allows fast job changes. With the optional bundle loader, you work independently. Bevel Cutting A revolutionary feature. With the ability of our machines to swivel their cutting head up to 50° on an additional fifth axis, we provide the solution to one of the biggest challenges in modern profile processing. If the laser beam always strikes the tube at a right angle, you end up with an elliptical cut edge. With the capability to swivel the tube laser cutting head, together with the feed axis, completely angled cuts are now possible. Of course, when working with the skyTUBE Laser, safety comes first! The skyTUBE Pro is a Class 1 laser system. There is no risk of contact with laser emissions or reflections during operation. For all our laser systems, nothing is more important than complete safety and compliance with the highest standards and directives. Technical Specifications: · Closed industrial housing, Class 1 laser (optionally Class 4) · Working area, tube cutting system/chuck: Round tubes 15–160 mm, rectangular tubes 15 x 15 – 110 mm · Working area on the tube: X 6500 mm, Y ±100 mm, Z 150 mm, A ±360°, U ±50° · Automatic material feed: up to 6 x 160 mm profiles, lengths 3500–7000 mm · Automated material unloading system for profile sections, construction adjusted to profile length · Z drive: ball screw axis system / with PTI SVZ system · X/Y drive: linear axis system / with PTI AC-SERVO system · Productive cutting speed: depending on material and laser combination, up to 50 m/min / 1.4G · Software resolution: up to 2500 DPI · Repeatability: ± 0.03 mm · Max. footprint dimensions (LxWxH): 11,600 mm x 2,830 mm x 2,100 mm + unloading system according to profile section length

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels Chsdpoiqxtbjfx Aaqsd • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators For more information please download our catalog. If you're interested in our products, please contact us!

Year of construction: 2022, condition: new, LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid Bag filter Magnet for separating metal chips Washable prefilter Cleaning temperature is a comfortable 41 ° C Environmentally friendly Long service life of the cleaner little space required additional options are possible: Chodpfx Aajffhnlsqod Filter housing with washable nylon filter Insert sheet made of V2A to protect the plastic surface Trolley

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : - Eggersmann T 40 - Terra Select T 4 - EggersmannT 50 - Terra Select T 5 - Eggersmann T 55 - Terra Select T 6 - Eggersmann T 60 - Terra Select T 7 - Eggersmann T 70 - Eggersmann T 80 also Doppstadt, Pronar, Komptech , Mc Closkey... Chedpfofkm Dfsx Aaqed Bespoke maded drums are our specjality. In case of any question, please contact me by mobile or e-mail..

Condition: used, Year of construction: 2017, Operational condition SPI machine. Cjdpfx Aaew Ty Rbeqshd Ask for specification!

Condition: excellent (used), Year of construction: 2018, Source Technology PowerHeater and FlexiCut machines. Direct from meat-free facility, used for making vegetarian 'chicken style' products. In excellent condition and rarely available for sale as used machines. New price of these machines is £750,000 Chedpfst Rh T Dex Aaqjd

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Cedpfxjwhbnls Aaqohd

Condition: ready for operation (used), Components per hour: 480,000, field of view (FOV) dimensions: 61.1x44.9mm², PCB dimensions: 50-533x50-609mm, PCB thickness: 0.5-4mm, max. PCB weight: 3kg, clamping clearance for PCB clamping: 3mm, component clearance under the camera: 34mm, component clearance under the PCB: 60mm. Length: 1110mm, width: 1351mm, height: 1892mm, weight: 900kg. Without loader and unloader. On-site inspection is possible. Chsdpfx Ajwb E Sboaqsd

Year of construction: 2021, condition: as good as new (ex-display), The brush washbasin LCT bio.x C100 is the proven classic in a new design and with optimized equipment technology. It impresses with its extraordinary stability and load-bearing capacity. The spacious work surface enables barrier-free and comfortable working. - stable construction - particularly low-maintenance - high load capacity - Energy-saving mode for downtimes such as nights or weekends - A flexible articulated hose allows easy rinsing of the parts - Optimum cleaning performance by heating the cleaner to 41 °C The workpieces are rinsed off through a nozzle. With With the help of the flexible articulated hose, the nozzle in the desired position can be fixed. The cleaning brush supports the cleaning strongly dirty parts. The large cleaning surface enables effective cleaning To work. High carrying capacity of the washer due to stable device construction. Device is made of plastic and is therefore very stable and corrosion-free. Easy to transport using a lift truck. Multi-stage filter system, consisting of coarse screen, fine screen and magnet. In addition, a washable filter bag holds (fineness: 100 μm) finest impurities back before they get into the bathroom. A functional control with soft-touch control panel guaranteed by choosing the energy saving mode Energy savings of approx. 50%. All electronic components of the device are in one compact technical unit. Our LCT bio.x C100 can be used with the following label-free cleaners be driven LCT BioLiquid LCT Bio Liquid Special LCT Bio Liquid Power: LCT coconut cleaner Chodsh S Undepfx Aaqed LCT Coconut Cleaner Alu LCT Coconut Cleaner low-foaming

Year of construction: 2024, condition: new, We manufacture and provide drums for mobile and stationary screeners, for : Pronar MPB 18.47 Pronar MPB 20.55 Pronar MPB 20.72 also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey... Bespoke maded drums are our specjality. Chjdpefkm Dpefx Aaqjd In case of any question, please contact me by mobile or e-mail.

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Csdpfsw Ty Hcjx Aaqshd Ask for specification!

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Chjdpfxjvth Aus Aaqjd

Condition: good (used), Year of construction: 2008, CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, CNC control Cedpewubtnefx Aaqehd -Type: PA8000 LW -Dimensions: 330/250/H130 mm -Weight: 5.9 kg

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 Cedpfswcgdnex Aaqehd used - efficient

Condition: ready for operation (used), Adept Technology 10332-00600 VIS Board, Serial No. 6545902033, used, minor signs of wear, 100% functional, scope of delivery as per photos Chsdoi D Tttjpfx Aaqjd

Condition: good (used), CNC control, control rack, electronic module Chedswt R Irepfx Aaqod -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

Condition: new, Adept Technology 10332-00714 Processor Board, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Codpfxsi D Ttzs Aaqshd

Condition: new, Adept Technology 10332-00655 EVI Board, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Csdpfx Aoi D Ttwsaqehd