Used Atlas Copco Pumps for sale (376)

Condition: excellent (used), functionality: fully functional, overall weight: 1,570 kg, Year of construction: 2019, Two pieces available Machine type: internal combustion engine-driven pump Machine brand: ATLAS COPCO Designation: WEL PST 100 CNP Year of manufacture: 2019 Own weight (kg): 1570 Engine type: Hatz 2G40 /compression ignition/ Engine power (kW): 9.8 Engine capacity (cm3): 997 Fuel type: diesel Maximum capacity – 100m3/h. Pumping height – 20 m. Suction pipe diameter – 100mm. Pumping pipe diameter – 100mm. The Atlas Copco WEL PST piston pump is a high-performance device suitable for difficult tasks requiring 24-hour operation, designed to save fuel. Codpfx Afjvz Drhsnjpu

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. Cjdpoyhc Irjfx Afnepu - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: ready for operation (used), Compressor GA-55 - maximaal 10 bar - 131 liter/sec bij 8 bar = 50,7 kW - 129 liter/sec bij 9,5 bar = 56,3 kW Cpodpfx Afsygyw Isnsu - gewicht: 1600 kg - afmetingen: 2590 x 912 x 1790 mm Droger FD130 - 132 liter/sec bij 3° C - 165 liter/sec bij 6° C - 186 liter/sec bij 10° C - maximaal 20 bar - gewicht: 200 kg - afmetingen: 1419 x 686 x 928 mm

Condition: as good as new (ex-display), 10 bar compressor Bought new in 2023 and only used for a few tests. This is the latest current model and identical to what you would buy if ordering new today. Cpsdpfxjr Alwte Afnsu

Condition: good (used), Year of construction: 1998, operating hours: 1,329 h, fuel type: diesel, motor manufacturer: Yanmar, Field of application: Construction Drive: Wheel Empty weight: 3.380 kg Csdpfxsygwfis Afnepu Number of owners: 1 Technical condition: good Visual appearance: good Drill equipment: Tank, Control Panel, Steel canopy Production country: NL Please contact Michael Overmeer for more information Atlas-Copco with 1.329 operating hours mounted on a trailer year of construction december 1998 with a hydraulically operated light tower (9 meters), hydraulic support legs and a hydraulic nose wheel. Changes and typographical errors reserved.

Condition: used, Min / Max: 1.8 / 4.5 kg Balancer / spring balancer Atlas Copco type RIL-10 for guiding pneumatic hand tools or similar equipment. The spring balancer relieves the operator from the weight of the tool. Codpfx Afswuug Uonopu

Condition: excellent (used), Year of construction: 2017, operating hours: 39,772 h, functionality: fully functional, Atlas Copco GA160 screw compressor, 160 kW with 7.5 bar and 30.20 m3/min. Cpodsyg I Rcspfx Afnsu

Condition: used, Year of construction: 2013, Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  Operating Pressure: 7–8.5 bar Air Capacity: 24.1 m³/min Power Supply: 132 kW Weight: 4,075 kg Condition: Excellent, annual maintenance completed August 2025 Optional equipment: Atlas Copco air dryer available Status: Installed and connected, fully functional Cedpfxoyb Thve Afnepu

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Codpfx Aoxrc Acsfnjpu

Condition: used, Year of construction: 2012, Overview  This low-pressure air compressor was manufactured in 2012 by the Swedish company Atlas Copco. The GA132 VSD model delivers up to 24.1 m³/min at a maximum pressure of 8.5 bar. The unit was fully reconditioned in 2025, including the installation of a new HMI, and is in excellent working condition. It remains installed and connected, can be inspected on-site, and is immediately available. Spare parts are included, and an Atlas Copco air dryer can be supplied optionally. Technical data  Operating Pressure: 7–8.5 bar Air Capacity: 24.1 m³/min Power Supply: 132 kW Weight: 4,075 kg Condition: Fully reconditioned in 2025 (new HMI) Additional equipment: Optional Atlas Copco air dryer Status: Installed and connected, fully functional Availability: Immediate Codpfoyb Thiex Afnjpu

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg Cpjdpsxrnn Djfx Afnou

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Atlas Copco GA160VSD+FF screw compressor. Integrated dryer and frequency converter. 160 kW with 8.3 bar and 35.6 m3/min. Heat recovery system installed. Cpedpfsyfl Ivox Afneu

Condition: repair required (used), operating hours: 15,960 h, functionality: not functional, overall weight: 2,383 kg, 1 x Atlas Copco QAS 138 Only 15,960 operating hours – not functional Ex works DK-6330 Padborg. Rated power: 125 kVA Cpjdpfx Afoyhqmvoneu Rated current: 180 A Rated voltage: 400 V Cooling: Water Series: QAS Engine power: 140 kW Weight: 2,383 kg

Condition: excellent (used), Year of construction: 2014, General information Field of application: Construction Reference number: 2 Weights Empty weight: 450 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 6,5 t - 13 t Reconditioned: Yes Delivery terms: EXW Working pressure: 100-150 bar Codpfx Afjrr Tg Nonspu Required hydraulic flow: 100 l/min Strike count: 550-1250 Latest inspection: 2024-03-01 Production country: DE Additional information Please contact Ö. Inalkac for more information Atlas Copco/ Epiroc SB452 general overhauled/GENERALÜBERHOLT top condition. This SB452 is with following NEW parts: seal kit, diaphragm, bushing, retainer pins, stop pin, control valve, chisel/tool, hoses and new painted. SB552, SB450, SB302

Condition: used, Year of construction: 2022, Field of application: Construction Drive: Wheel Empty weight: 749 kg Make of engine: Kubota Serial number: APP867098 Transport dimensions (LxWxH): 2.29x1.35x1.55 Csdpfxjya Tzao Afnjpu Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, Field of application: Construction Drive: Wheel Empty weight: 749 kg Make of engine: Kubota Serial number: APP866746 Cedpfx Asya Tycjfnspu Transport dimensions (LxWxH): 2.29x1.35x1.55 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 7,225 h, machine/vehicle number: ESF372663, fuel type: diesel, power: 32 kW (43.51 HP), motor manufacturer: Kubota, Field of application: Construction Empty weight: 1.039 kg Cpedpoyaxblofx Afnju Generator capacity: 40 kVA Transport dimensions (LxWxH): 2.45x1.1x1.48 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2009, operating hours: 65,190 h, functionality: fully functional, Oil-free screw compressor Atlas Copco ZT200, 200 kW, 8.6 bar with 30.60 m3/min Cpodpjydcy Tsfx Afnou

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Cedpfx Afjyg H Tcjnspu

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 Cjdpjyc Rvaefx Afnspu • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Cpjdpfx Aexl Hxbofnsu Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: CAI710777, power: 7.5 kW (10.20 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA7 FF lubricated compressor is an ideal solution for businesses seeking reliability and efficiency in their operations. Designed by Atlas Copco, this pre-owned model delivers a power output of 7.5 kW, ensuring robust performance suitable for a wide range of industrial applications. Operating at a maximum pressure of 9.75 bar, the GA7 FF can meet the demanding requirements of your pneumatic system. The rugged construction of this equipment ensures long service life and optimal operation, even in challenging environments. Its compact design enables easy integration into most facilities without the need for major modifications. Cpjdpfxjx Uydrs Afnsu This Atlas Copco compressor stands out for its ability to reduce energy consumption while maintaining high production levels, ultimately helping to lower operating costs. This product is a wise choice for those seeking reliable and high-performance equipment on the used machinery market.

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, Compressor in excellent condition, rewound motor. The machine is operational and tested. Technical specifications: Max pressure: 10 bar Power: 90 kW - 110 HP Cpodpfx Aoxn Sw Iofnsu Capacity: 16,200 liters/min

Condition: used, Year of construction: 1998, feed pressure 8,5 bar liter capacity . l Cjdpfxex Edwuo Afnjpu total power requirement 454 kW

Condition: excellent (used), Year of construction: 2012, operating hours: 32,278 h, functionality: fully functional, Screw compressor Atlas Copco GA55VSDFF. 55 kW with 13 bar and 10.51 m³/min. Integrated dryer and frequency converter. Cpedpfx Ajya Dp Iofnsu